ARM: dts: at91: sama5: Add the sfr node

[u-boot] / arch / arm / dts / meson-gx.dtsi

diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index c1291007b37c2b12fff2cb1c5cf8739682e8d667..436b875060e708340beb6b8332655f259d63e450 100644 (file)
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -71,6 +71,14 @@
                        reg = <0x0 0x10000000 0x0 0x200000>;
                        no-map;
                };
+
+               linux,cma {
+                       compatible = "shared-dma-pool";
+                       reusable;
+                       size = <0x0 0xbc00000>;
+                       alignment = <0x0 0x400000>;
+                       linux,cma-default;
+               };
        };
 
        cpus {
@@ -233,7 +241,7 @@
                        };
 
                        i2c_A: i2c@8500 {
-                               compatible = "amlogic,meson-gxbb-i2c";
+                               compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
                                reg = <0x0 0x08500 0x0 0x20>;
                                interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
                                #address-cells = <1>;
@@ -255,6 +263,14 @@
                                status = "disabled";
                        };
 
+                       saradc: adc@8680 {
+                               compatible = "amlogic,meson-saradc";
+                               reg = <0x0 0x8680 0x0 0x34>;
+                               #io-channel-cells = <1>;
+                               interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+                               status = "disabled";
+                       };
+
                        pwm_ef: pwm@86c0 {
                                compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
                                reg = <0x0 0x086c0 0x0 0x10>;
@@ -271,7 +287,7 @@
                        };
 
                        i2c_B: i2c@87c0 {
-                               compatible = "amlogic,meson-gxbb-i2c";
+                               compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
                                reg = <0x0 0x087c0 0x0 0x20>;
                                interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
                                #address-cells = <1>;
@@ -280,7 +296,7 @@
                        };
 
                        i2c_C: i2c@87e0 {
-                               compatible = "amlogic,meson-gxbb-i2c";
+                               compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
                                reg = <0x0 0x087e0 0x0 0x20>;
                                interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
                                #address-cells = <1>;
@@ -288,6 +304,14 @@
                                status = "disabled";
                        };
 
+                       spifc: spi@8c80 {
+                               compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+                               reg = <0x0 0x08c80 0x0 0x80>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
                        watchdog@98d0 {
                                compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
                                reg = <0x0 0x098d0 0x0 0x10>;
@@ -309,7 +333,7 @@
                };
 
                sram: sram@c8000000 {
-                       compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+                       compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
                        reg = <0x0 0xc8000000 0x0 0x14000>;
 
                        #address-cells = <1>;
@@ -317,12 +341,12 @@
                        ranges = <0 0x0 0xc8000000 0x14000>;
 
                        cpu_scp_lpri: scp-shmem@0 {
-                               compatible = "amlogic,meson-gxbb-scp-shmem";
+                               compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
                                reg = <0x13000 0x400>;
                        };
 
                        cpu_scp_hpri: scp-shmem@200 {
-                               compatible = "amlogic,meson-gxbb-scp-shmem";
+                               compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
                                reg = <0x13400 0x400>;
                        };
                };
@@ -334,6 +358,13 @@
                        #size-cells = <2>;
                        ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 
+                       clkc_AO: clock-controller@040 {
+                               compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
+                               reg = <0x0 0x00040 0x0 0x4>;
+                               #clock-cells = <1>;
+                               #reset-cells = <1>;
+                       };
+
                        uart_AO: serial@4c0 {
                                compatible = "amlogic,meson-uart";
                                reg = <0x0 0x004c0 0x0 0x14>;
@@ -350,8 +381,24 @@
                                status = "disabled";
                        };
 
+                       i2c_AO: i2c@500 {
+                               compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+                               reg = <0x0 0x500 0x0 0x20>;
+                               interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       pwm_AO_ab: pwm@550 {
+                               compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+                               reg = <0x0 0x00550 0x0 0x10>;
+                               #pwm-cells = <3>;
+                               status = "disabled";
+                       };
+
                        ir: ir@580 {
-                               compatible = "amlogic,meson-gxbb-ir";
+                               compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
                                reg = <0x0 0x00580 0x0 0x40>;
                                interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
                                status = "disabled";
@@ -365,13 +412,12 @@
                        #size-cells = <2>;
                        ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 
-                       rng {
+                       hwrng: rng {
                                compatible = "amlogic,meson-rng";
                                reg = <0x0 0x0 0x0 0x4>;
                        };
                };
 
-
                hiubus: hiubus@c883c000 {
                        compatible = "simple-bus";
                        reg = <0x0 0xc883c000 0x0 0x2000>;
@@ -395,7 +441,6 @@
                               0x0 0xc8834540 0x0 0x4>;
                        interrupts = <0 8 1>;
                        interrupt-names = "macirq";
-                       phy-mode = "rgmii";
                        status = "disabled";
                };
 
@@ -442,6 +487,38 @@
                        cvbs_vdac_port: port@0 {
                                reg = <0>;
                        };
+
+                       /* HDMI-TX output port */
+                       hdmi_tx_port: port@1 {
+                               reg = <1>;
+
+                               hdmi_tx_out: endpoint {
+                                       remote-endpoint = <&hdmi_tx_in>;
+                               };
+                       };
+               };
+
+               hdmi_tx: hdmi-tx@c883a000 {
+                       compatible = "amlogic,meson-gx-dw-hdmi";
+                       reg = <0x0 0xc883a000 0x0 0x1c>;
+                       interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       /* VPU VENC Input */
+                       hdmi_tx_venc_port: port@0 {
+                               reg = <0>;
+
+                               hdmi_tx_in: endpoint {
+                                       remote-endpoint = <&hdmi_tx_out>;
+                               };
+                       };
+
+                       /* TMDS Output */
+                       hdmi_tx_tmds_port: port@1 {
+                               reg = <1>;
+                       };
                };
        };
 };