priority = /bits/ 8 <200>;
};
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ };
+
sound {
compatible = "rockchip,rockchip-audio-max98090";
rockchip,model = "ROCKCHIP-I2S";
533000 1150000
666000 1200000
>;
- rockchip,num-channels = <2>;
- rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
- 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
- 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
- 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
- 0x5 0x0>;
- rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
- 0xa60 0x40 0x10 0x0>;
- rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>;
- rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
};
&efuse {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
+ mmc-pwrseq = <&emmc_pwrseq>;
disable-wp;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_deassert_reset>;
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>;
status = "okay";
};
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
i2c-scl-rising-time-ns = <100>; /* 45ns measured */
+ u-boot,dm-pre-reloc;
rk808: pmic@1b {
compatible = "rockchip,rk808";
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
+ u-boot,dm-pre-reloc;
vcc1-supply = <&vcc33_sys>;
vcc2-supply = <&vcc33_sys>;
};
emmc {
- /* Make sure eMMC is not in reset */
- emmc_deassert_reset: emmc-deassert-reset {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+ emmc_reset: emmc-reset {
+ rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
};
/*
pmic {
pmic_int_l: pmic-int-l {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ /*
+ * Causes jerry to hang when probing bus 0
+ * rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ */
};
};