mtd: nand: mxs support oobsize bigger than 512

[u-boot] / arch / arm / dts / sun5i-a13-utoo-p66.dts

diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
index 8c1bca70390d76300727e78fa40e42701f6163e2..eb793d5a2bd6748cec5696c2bdbfbbb4999b530f 100644 (file)
--- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -52,14 +52,6 @@
        model = "Utoo P66";
        compatible = "utoo,p66", "allwinner,sun5i-a13";
 
-       aliases {
-               serial0 = &uart1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
        i2c_lcd: i2c@0 {
                /* The lcd panel i2c interface is hooked up via gpios */
                compatible = "i2c-gpio";
@@ -101,7 +93,7 @@
                compatible = "chipone,icn8318";
                reg = <0x40>;
                interrupt-parent = <&pio>;
-               interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+               interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
                pinctrl-names = "default";
                pinctrl-0 = <&ts_wake_pin_p66>;
                wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
@@ -161,6 +153,10 @@
        };
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
        mmc0_cd_pin_p66: mmc0_cd_pin@0 {
                allwinner,pins = "PG0";
@@ -169,6 +165,20 @@
                allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
 
+       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+               allwinner,pins = "PG1";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+       };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PG2";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
        i2c_lcd_pins: i2c_lcd_pin@0 {
                allwinner,pins = "PG10", "PG12";
                allwinner,function = "gpio_out";
@@ -227,13 +237,16 @@
        status = "okay";
 };
 
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins_b>;
+&usb_otg {
+       dr_mode = "otg";
        status = "okay";
 };
 
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+       usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_ldo3>;
        status = "okay";