arm: mvebu: Add DM and OF_CONTROL support to SPL

[u-boot] / arch / arm / dts / sun5i-a13-utoo-p66.dts

diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
index 6e19f789aebaf264c8be9e2a2fcbbfedb22ce697..eb793d5a2bd6748cec5696c2bdbfbbb4999b530f 100644 (file)
--- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -50,20 +45,13 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Utoo P66";
        compatible = "utoo,p66", "allwinner,sun5i-a13";
 
-       aliases {
-               serial0 = &uart1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
        i2c_lcd: i2c@0 {
                /* The lcd panel i2c interface is hooked up via gpios */
                compatible = "i2c-gpio";
@@ -101,6 +89,20 @@
        pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
+       icn8318: touchscreen@40 {
+               compatible = "chipone,icn8318";
+               reg = <0x40>;
+               interrupt-parent = <&pio>;
+               interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+               pinctrl-names = "default";
+               pinctrl-0 = <&ts_wake_pin_p66>;
+               wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+               touchscreen-size-x = <800>;
+               touchscreen-size-y = <480>;
+               touchscreen-inverted-x;
+               touchscreen-swapped-x-y;
+       };
+
        pcf8563: rtc@51 {
                compatible = "nxp,pcf8563";
                reg = <0x51>;
@@ -151,6 +153,10 @@
        };
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
        mmc0_cd_pin_p66: mmc0_cd_pin@0 {
                allwinner,pins = "PG0";
@@ -159,6 +165,20 @@
                allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
 
+       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+               allwinner,pins = "PG1";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+       };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PG2";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
        i2c_lcd_pins: i2c_lcd_pin@0 {
                allwinner,pins = "PG10", "PG12";
                allwinner,function = "gpio_out";
@@ -166,6 +186,13 @@
                allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
 
+       ts_wake_pin_p66: ts_wake_pin@0 {
+               allwinner,pins = "PB3";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
        usb0_vbus_pin_a: usb0_vbus_pin@0 {
                allwinner,pins = "PB4";
                allwinner,function = "gpio_out";
@@ -210,13 +237,16 @@
        status = "okay";
 };
 
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins_b>;
+&usb_otg {
+       dr_mode = "otg";
        status = "okay";
 };
 
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+       usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_ldo3>;
        status = "okay";