sunxi: Split out common board design for ALL-H3-CC device tree

[u-boot] / arch / arm / dts / sunxi-libretech-all-h3-cc.dtsi

diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644 (file)
index 0000000..5d01bba
--- /dev/null
+++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       aliases {
+               ethernet0 = &emac;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pwr_led {
+                       label = "librecomputer:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+                       default-state = "on";
+               };
+
+               status_led {
+                       label = "librecomputer:blue:status";
+                       gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+
+               power {
+                       label = "power";
+                       linux,code = <KEY_POWER>;
+                       gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+               };
+       };
+
+       reg_vcc1v2: vcc1v2 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc1v2";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+               vin-supply = <&reg_vcc5v0>;
+               gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+               enable-active-high;
+       };
+
+       reg_vcc3v3: vcc3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&reg_vcc5v0>;
+       };
+
+       /* This represents the board's 5V input */
+       reg_vcc5v0: vcc5v0 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       reg_vcc_dram: vcc-dram {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-dram";
+               regulator-min-microvolt = <1500000>;
+               regulator-max-microvolt = <1500000>;
+               regulator-always-on;
+               regulator-boot-on;
+               vin-supply = <&reg_vcc5v0>;
+               gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+               enable-active-high;
+       };
+
+       reg_vcc_io: vcc-io {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-io";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+               vin-supply = <&reg_vcc3v3>;
+               gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+       };
+
+       reg_vdd_cpux: vdd-cpux {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd-cpux";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+               vin-supply = <&reg_vcc5v0>;
+               gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+               enable-active-high;
+       };
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ehci2 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+&emac {
+       phy-handle = <&int_mii_phy>;
+       phy-mode = "mii";
+       allwinner,leds-active-low;
+       status = "okay";
+};
+
+&ir {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ir_pins_a>;
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>;
+       vmmc-supply = <&reg_vcc_io>;
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+       cd-inverted;
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&ohci2 {
+       status = "okay";
+};
+
+&ohci3 {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       /* VBUS on USB ports are always on */
+       usb0_vbus-supply = <&reg_vcc5v0>;
+       usb1_vbus-supply = <&reg_vcc5v0>;
+       usb2_vbus-supply = <&reg_vcc5v0>;
+       usb3_vbus-supply = <&reg_vcc5v0>;
+       status = "okay";
+};