* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "socionext,uniphier-pxs2";
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
operating-points-v2 = <&cpu_opp>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
operating-points-v2 = <&cpu_opp>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
};
};
- cpu_opp: opp_table {
+ cpu_opp: opp-table {
compatible = "operating-points-v2";
opp-shared;
clock-frequency = <25000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu-crit {
+ temperature = <95000>; /* 95C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu-alert {
+ temperature = <85000>; /* 85C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&intc>;
- u-boot,dm-pre-reloc;
l2: l2-cache@500c0000 {
compatible = "socionext,uniphier-system-cache";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
clock-frequency = <88900000>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
clock-frequency = <88900000>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
clock-frequency = <88900000>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
clock-frequency = <88900000>;
+ resets = <&peri_rst 3>;
};
- port0x: gpio@55000008 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000008 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port1x: gpio@55000010 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000010 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port2x: gpio@55000018 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000018 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port3x: gpio@55000020 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000020 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port4: gpio@55000028 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000028 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port5x: gpio@55000030 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000030 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port6x: gpio@55000038 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000038 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port7x: gpio@55000040 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000040 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port8x: gpio@55000048 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000048 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port9x: gpio@55000050 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000050 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port10x: gpio@55000058 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000058 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port12x: gpio@55000068 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000068 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port13x: gpio@55000070 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000070 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port14x: gpio@55000078 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000078 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port15x: gpio@55000080 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000080 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port16x: gpio@55000088 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x55000088 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port17x: gpio@550000a0 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000a0 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port18x: gpio@550000a8 {
+ gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
- reg = <0x550000a8 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port19x: gpio@550000b0 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000b0 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port20x: gpio@550000b8 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000b8 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port21x: gpio@550000c0 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000c0 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port22x: gpio@550000c8 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000c8 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port23x: gpio@550000d0 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000d0 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port24x: gpio@550000d8 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000d8 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port25x: gpio@550000e0 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000e0 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port26x: gpio@550000e8 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000e8 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port27x: gpio@550000f0 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000f0 0x8>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- port28x: gpio@550000f8 {
- compatible = "socionext,uniphier-gpio";
- reg = <0x550000f8 0x8>;
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>,
+ <&pinctrl 96 0 0>;
+ gpio-ranges-group-names = "gpio_range0",
+ "gpio_range1";
+ ngpios = <232>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+ <21 217 3>;
};
i2c0: i2c@58780000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
#size-cells = <0>;
interrupts = <0 45 4>;
clocks = <&peri_clk 8>;
+ resets = <&peri_rst 8>;
clock-frequency = <400000>;
};
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
sdctrl@59810000 {
compatible = "socionext,uniphier-pxs2-sdctrl",
"simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
- u-boot,dm-pre-reloc;
+ reg = <0x59810000 0x400>;
sd_clk: clock {
compatible = "socionext,uniphier-pxs2-sd-clock";
compatible = "socionext,uniphier-pxs2-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
- u-boot,dm-pre-reloc;
pinctrl: pinctrl {
compatible = "socionext,uniphier-pxs2-pinctrl";
- u-boot,dm-pre-reloc;
};
};
- aidet@5fc20000 {
- compatible = "simple-mfd", "syscon";
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-pxs2-aidet";
reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
timer@60000200 {
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-pxs2-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ socionext,tmod-calibration = <0x0f86 0x6844>;
+ };
};
usb0: usb@65b00000 {
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
interrupts = <0 65 4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand>;
+ pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
- nand-ecc-strength = <8>;
+ resets = <&sys_rst 2>;
};
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
projects / u-boot / blobdiff