arm64: optimize smp_kick_all_cpus

[u-boot] / arch / arm / dts / zynqmp-ep108.dts

diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index d952de189f3afd5161f38a96452013a4333f00b2..0bbf9a7597560195989d69ca8118aaae55381ca6 100644 (file)
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -17,10 +17,14 @@
        model = "ZynqMP EP108";
 
        aliases {
+               mmc0 = &sdhci0;
+               mmc1 = &sdhci1;
                serial0 = &uart0;
                spi0 = &qspi;
                spi1 = &spi0;
                spi2 = &spi1;
+               usb0 = &usb0;
+               usb1 = &usb1;
        };
 
        chosen {
@@ -29,7 +33,7 @@
 
        memory {
                device_type = "memory";
-               reg = <0x0 0x0 0x40000000>;
+               reg = <0x0 0x0 0x0 0x40000000>;
        };
 };
 
@@ -69,10 +73,41 @@
        };
 };
 
+&nand0 {
+       status = "okay";
+       arasan,has-mdma;
+       num-cs = <1>;
+
+       partition@0 {   /* for testing purpose */
+               label = "nand-fsbl-uboot";
+               reg = <0x0 0x0 0x400000>;
+       };
+       partition@1 {   /* for testing purpose */
+               label = "nand-linux";
+               reg = <0x0 0x400000 0x1400000>;
+       };
+       partition@2 {   /* for testing purpose */
+               label = "nand-device-tree";
+               reg = <0x0 0x1800000 0x400000>;
+       };
+       partition@3 {   /* for testing purpose */
+               label = "nand-rootfs";
+               reg = <0x0 0x1C00000 0x1400000>;
+       };
+       partition@4 {   /* for testing purpose */
+               label = "nand-bitstream";
+               reg = <0x0 0x3000000 0x400000>;
+       };
+       partition@5 {   /* for testing purpose */
+               label = "nand-misc";
+               reg = <0x0 0x3400000 0xFCC00000>;
+       };
+};
+
 &qspi {
        status = "okay";
        flash@0 {
-               compatible = "n25q512a11";
+               compatible = "m25p80";
                #address-cells = <1>;
                #size-cells = <1>;
                reg = <0x0>;
@@ -101,10 +136,20 @@
 &sata {
        status = "okay";
        ceva,broken-gen2;
+       /* SATA Phy OOB timing settings */
+       ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+       ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+       ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+       ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+       ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+       ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+       ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+       ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
 };
 
 &sdhci0 {
        status = "okay";
+       bus-width = <8>;
 };
 
 &sdhci1 {
@@ -151,12 +196,20 @@
 
 &usb0 {
        status = "okay";
+};
+
+&dwc3_0 {
+       status = "okay";
        dr_mode = "peripheral";
        maximum-speed = "high-speed";
 };
 
 &usb1 {
        status = "okay";
+};
+
+&dwc3_1 {
+       status = "okay";
        dr_mode = "host";
        maximum-speed = "high-speed";
 };