arm64: zynqmp: Remove additional comments from dts files

[u-boot] / arch / arm / dts / zynqmp-zcu102-revA.dts

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 2be6eb0eb5ebacc06d91617155b5f2dbd66814bf..efa94a14194b14ef7cb112bcda7349a42652a1b1 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * dts file for Xilinx ZynqMP ZCU102 RevA
  *
- * (C) Copyright 2015, Xilinx, Inc.
+ * (C) Copyright 2015 - 2018, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /dts-v1/;
@@ -78,7 +77,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -220,7 +218,7 @@
                 */
        };
 
-       i2cswitch@75 { /* u60 */
+       i2c-mux@75 { /* u60 */
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -333,72 +331,66 @@
                        reg = <2>;
                        /* MAXIM_PMBUS - 00 */
                        max15301@a { /* u46 */
-                               compatible = "max15301";
+                               compatible = "maxim,max15301";
                                reg = <0xa>;
                        };
                        max15303@b { /* u4 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0xb>;
                        };
                        max15303@10 { /* u13 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x10>;
                        };
                        max15301@13 { /* u47 */
-                               compatible = "max15301";
+                               compatible = "maxim,max15301";
                                reg = <0x13>;
                        };
                        max15303@14 { /* u7 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x14>;
                        };
                        max15303@15 { /* u6 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x15>;
                        };
                        max15303@16 { /* u10 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x16>;
                        };
                        max15303@17 { /* u9 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x17>;
                        };
                        max15301@18 { /* u63 */
-                               compatible = "max15301";
+                               compatible = "maxim,max15301";
                                reg = <0x18>;
                        };
                        max15303@1a { /* u49 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x1a>;
                        };
                        max15303@1d { /* u18 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                reg = <0x1d>;
                        };
                        max15303@20 { /* u8 */
-                               compatible = "max15303";
+                               compatible = "maxim,max15303";
                                status = "disabled"; /* unreachable */
                                reg = <0x20>;
                        };
 
-/*                     drivers/hwmon/pmbus/Kconfig:86:   be called max20751.
-drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
-*/
-                       max20751@72 { /* u95 FIXME - not detected */
-                               compatible = "max20751";
+                       max20751@72 { /* u95 */
+                               compatible = "maxim,max20751";
                                reg = <0x72>;
                        };
-                       max20751@73 { /* u96 FIXME - not detected */
-                               compatible = "max20751";
+                       max20751@73 { /* u96 */
+                               compatible = "maxim,max20751";
                                reg = <0x73>;
                        };
                };
                /* Bus 3 is not connected */
        };
-
-       /* FIXME PMOD - j160 */
-       /* FIXME MSP430F - u41 - not detected */
 };
 
 &i2c1 {
@@ -410,9 +402,8 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
        scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
        sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 
-       /* FIXME PL i2c via PCA9306 - u45 */
-       /* FIXME MSP430 - u41 - not detected */
-       i2cswitch@74 { /* u34 */
+       /* PL i2c via PCA9306 - u45 */
+       i2c-mux@74 { /* u34 */
                compatible = "nxp,pca9548";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -487,7 +478,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
                /* 5 - 7 unconnected */
        };
 
-       i2cswitch@75 {
+       i2c-mux@75 {
                compatible = "nxp,pca9548"; /* u135 */
                #address-cells = <1>;
                #size-cells = <0>;
@@ -516,24 +507,19 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
                        #size-cells = <0>;
                        reg = <3>;
                        /* DDR4 SODIMM */
-                       dev@19 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@19 {
                                reg = <0x19>;
                        };
-                       dev@30 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@30 {
                                reg = <0x30>;
                        };
-                       dev@35 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@35 {
                                reg = <0x35>;
                        };
-                       dev@36 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@36 {
                                reg = <0x36>;
                        };
-                       dev@51 { /* u-boot detection - maybe SPD */
-                               compatible = "xxx";
+                       dev@51 {
                                reg = <0x51>;
                        };
                };