#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sys_proto.h>
static void *base = (void *)IOMUXC_BASE_ADDR;
(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
- if (mux_ctrl_ofs)
+#if defined CONFIG_MX6SL
+ /* Check whether LVE bit needs to be set */
+ if (pad_ctrl & PAD_CTL_LVE) {
+ pad_ctrl &= ~PAD_CTL_LVE;
+ pad_ctrl |= PAD_CTL_LVE_BIT;
+ }
+#endif
+
+#ifdef CONFIG_IOMUX_LPSR
+ u32 lpsr = (pad & MUX_MODE_LPSR) >> MUX_MODE_SHIFT;
+
+ if (lpsr == IOMUX_CONFIG_LPSR) {
+ base = (void *)IOMUXC_LPSR_BASE_ADDR;
+ mux_mode &= ~IOMUX_CONFIG_LPSR;
+ /* set daisy chain sel_input */
+ if (sel_input_ofs)
+ sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
+ }
+#endif
+
+ if (is_soc_type(MXC_SOC_MX7) || mux_ctrl_ofs)
__raw_writel(mux_mode, base + mux_ctrl_ofs);
if (sel_input_ofs)
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
#endif
+
+#ifdef CONFIG_IOMUX_LPSR
+ if (lpsr == IOMUX_CONFIG_LPSR)
+ base = (void *)IOMUXC_BASE_ADDR;
+#endif
+
}
+/* configures a list of pads within declared with IOMUX_PADS macro */
void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
unsigned count)
{
iomux_v3_cfg_t const *p = pad_list;
+ int stride;
int i;
- for (i = 0; i < count; i++)
- imx_iomux_v3_setup_pad(*p++);
+#if defined(CONFIG_MX6QDL)
+ stride = 2;
+ if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ p += 1;
+#else
+ stride = 1;
+#endif
+ for (i = 0; i < count; i++) {
+ imx_iomux_v3_setup_pad(*p);
+ p += stride;
+ }
}
+
+void imx_iomux_set_gpr_register(int group, int start_bit,
+ int num_bits, int value)
+{
+ int i = 0;
+ u32 reg;
+ reg = readl(base + group * 4);
+ while (num_bits) {
+ reg &= ~(1<<(start_bit + i));
+ i++;
+ num_bits--;
+ }
+ reg |= (value << start_bit);
+ writel(reg, base + group * 4);
+}
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction)
+{
+ u32 reg;
+ /*
+ * Only on Vybrid the input/output buffer enable flags
+ * are part of the shared mux/conf register.
+ */
+ reg = readl(base + (gpio << 2));
+
+ if (direction)
+ reg |= 0x2;
+ else
+ reg &= ~0x2;
+
+ writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+ *gpio_state = readl(base + (gpio << 2)) &
+ ((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif