*
* hardware specific header
*
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __AM33XX_HARDWARE_H
#define __AM33XX_HARDWARE_H
-/* Module base addresses */
-#define LOW_LEVEL_SRAM_STACK 0x4030B7FC
-#define UART0_BASE 0x44E09000
+#include <config.h>
+#include <asm/arch/omap.h>
+#ifdef CONFIG_AM33XX
+#include <asm/arch/hardware_am33xx.h>
+#elif defined(CONFIG_TI814X)
+#include <asm/arch/hardware_ti814x.h>
+#endif
+
+/*
+ * Common hardware definitions
+ */
/* DM Timer base addresses */
#define DM_TIMER0_BASE 0x4802C000
/* GPIO Base address */
#define GPIO0_BASE 0x48032000
#define GPIO1_BASE 0x4804C000
-#define GPIO2_BASE 0x481AC000
/* BCH Error Location Module */
#define ELM_BASE 0x48080000
-/* Watchdog Timer */
-#define WDT_BASE 0x44E35000
-
-/* Control Module Base Address */
-#define CTRL_BASE 0x44E10000
-#define CTRL_DEVICE_BASE 0x44E10600
-
-/* PRCM Base Address */
-#define PRCM_BASE 0x44E00000
-
/* EMIF Base address */
#define EMIF4_0_CFG_BASE 0x4C000000
#define EMIF4_1_CFG_BASE 0x4D000000
#define CM_WKUP 0x44E00400
#define CM_DPLL 0x44E00500
#define CM_DEVICE 0x44E00700
+#define CM_RTC 0x44E00800
#define CM_CEFUSE 0x44E00A00
#define PRM_DEVICE 0x44E00F00
/* VTP Base address */
-#define VTP0_CTRL_ADDR 0x44E10E0C
+#define VTP1_CTRL_ADDR 0x48140E10
/* DDR Base address */
#define DDR_CTRL_ADDR 0x44E10E04
#define DDR_CONTROL_BASE_ADDR 0x44E11404
-#define DDR_PHY_BASE_ADDR 0x44E12000
-#define DDR_PHY_BASE_ADDR2 0x44E120A4
+#define DDR_PHY_CMD_ADDR2 0x47C0C800
+#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
/* UART */
#define DEFAULT_UART_BASE UART0_BASE
#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400)
#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE
+/* GPMC Base address */
+#define GPMC_BASE 0x50000000
+
/* CPSW Config space */
-#define AM335X_CPSW_BASE 0x4A100000
-#define AM335X_CPSW_MDIO_BASE 0x4A101000
+#define CPSW_BASE 0x4A100000
+
+/* OTG */
+#define USB0_OTG_BASE 0x47401000
+#define USB1_OTG_BASE 0x47401800
+int clk_get(int clk);
#endif /* __AM33XX_HARDWARE_H */