aspeed: AST2500 Pinctrl Driver

[u-boot] / arch / arm / include / asm / arch-fsl-layerscape / fsl_serdes.h

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index 730c2b2eee444757f2bf54a5957d54ba9b9cb5ca..a8f9a505016da36f9b7ea9f16b9f899c09162a19 100644 (file)
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,8 +9,12 @@
 
 #include <config.h>
 
-#if defined(CONFIG_LS2085A)
+#ifdef CONFIG_ARCH_LS2080A
 enum srds_prtcl {
+       /*
+        * Nobody will check whether the device 'NONE' has been configured,
+        * So use it to indicate if the serdes_prtcl_map has been initialized.
+        */
        NONE = 0,
        PCIE1,
        PCIE2,
@@ -44,10 +48,10 @@ enum srds_prtcl {
        SGMII14,
        SGMII15,
        SGMII16,
-       QSGMII_A, /* A indicates MACs 1-4 */
-       QSGMII_B, /* B indicates MACs 5-8 */
-       QSGMII_C, /* C indicates MACs 9-12 */
-       QSGMII_D, /* D indicates MACs 12-16 */
+       QSGMII_A,
+       QSGMII_B,
+       QSGMII_C,
+       QSGMII_D,
        SERDES_PRCTL_COUNT
 };
 
@@ -55,6 +59,98 @@ enum srds {
        FSL_SRDS_1  = 0,
        FSL_SRDS_2  = 1,
 };
+#elif defined(CONFIG_FSL_LSCH2)
+enum srds_prtcl {
+       /*
+        * Nobody will check whether the device 'NONE' has been configured,
+        * So use it to indicate if the serdes_prtcl_map has been initialized.
+        */
+       NONE = 0,
+       PCIE1,
+       PCIE2,
+       PCIE3,
+       PCIE4,
+       SATA1,
+       SATA2,
+       SRIO1,
+       SRIO2,
+       SGMII_FM1_DTSEC1,
+       SGMII_FM1_DTSEC2,
+       SGMII_FM1_DTSEC3,
+       SGMII_FM1_DTSEC4,
+       SGMII_FM1_DTSEC5,
+       SGMII_FM1_DTSEC6,
+       SGMII_FM1_DTSEC9,
+       SGMII_FM1_DTSEC10,
+       SGMII_FM2_DTSEC1,
+       SGMII_FM2_DTSEC2,
+       SGMII_FM2_DTSEC3,
+       SGMII_FM2_DTSEC4,
+       SGMII_FM2_DTSEC5,
+       SGMII_FM2_DTSEC6,
+       SGMII_FM2_DTSEC9,
+       SGMII_FM2_DTSEC10,
+       SGMII_TSEC1,
+       SGMII_TSEC2,
+       SGMII_TSEC3,
+       SGMII_TSEC4,
+       XAUI_FM1,
+       XAUI_FM2,
+       AURORA,
+       CPRI1,
+       CPRI2,
+       CPRI3,
+       CPRI4,
+       CPRI5,
+       CPRI6,
+       CPRI7,
+       CPRI8,
+       XAUI_FM1_MAC9,
+       XAUI_FM1_MAC10,
+       XAUI_FM2_MAC9,
+       XAUI_FM2_MAC10,
+       HIGIG_FM1_MAC9,
+       HIGIG_FM1_MAC10,
+       HIGIG_FM2_MAC9,
+       HIGIG_FM2_MAC10,
+       QSGMII_FM1_A,           /* A indicates MACs 1,2,5,6 */
+       QSGMII_FM1_B,           /* B indicates MACs 5,6,9,10 */
+       QSGMII_FM2_A,
+       QSGMII_FM2_B,
+       XFI_FM1_MAC1,
+       XFI_FM1_MAC2,
+       XFI_FM1_MAC9,
+       XFI_FM1_MAC10,
+       XFI_FM2_MAC9,
+       XFI_FM2_MAC10,
+       INTERLAKEN,
+       QSGMII_SW1_A,           /* Indicates ports on L2 Switch */
+       QSGMII_SW1_B,
+       SGMII_2500_FM1_DTSEC1,
+       SGMII_2500_FM1_DTSEC2,
+       SGMII_2500_FM1_DTSEC3,
+       SGMII_2500_FM1_DTSEC4,
+       SGMII_2500_FM1_DTSEC5,
+       SGMII_2500_FM1_DTSEC6,
+       SGMII_2500_FM1_DTSEC9,
+       SGMII_2500_FM1_DTSEC10,
+       SGMII_2500_FM2_DTSEC1,
+       SGMII_2500_FM2_DTSEC2,
+       SGMII_2500_FM2_DTSEC3,
+       SGMII_2500_FM2_DTSEC4,
+       SGMII_2500_FM2_DTSEC5,
+       SGMII_2500_FM2_DTSEC6,
+       SGMII_2500_FM2_DTSEC9,
+       SGMII_2500_FM2_DTSEC10,
+       TX_CLK,
+       SERDES_PRCTL_COUNT
+};
+
+enum srds {
+       FSL_SRDS_1  = 0,
+       FSL_SRDS_2  = 1,
+};
+
 #endif
 
 int is_serdes_configured(enum srds_prtcl device);
@@ -63,4 +159,17 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
 int is_serdes_prtcl_valid(int serdes, u32 prtcl);
 
+#ifdef CONFIG_FSL_LSCH2
+const char *serdes_clock_to_string(u32 clock);
+int get_serdes_protocol(void);
+#ifdef CONFIG_SYS_HAS_SERDES
+/* Get the volt of SVDD in unit mV */
+int get_serdes_volt(void);
+/* Set the volt of SVDD in unit mV */
+int set_serdes_volt(int svdd);
+/* The target volt of SVDD in unit mV */
+int setup_serdes_volt(u32 svdd);
+#endif
+#endif
+
 #endif /* __FSL_SERDES_H__ */