/*
* Common definitions for LPC32XX board configurations
*
- * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _LPC32XX_CONFIG_H
#define _LPC32XX_CONFIG_H
+
/* Basic CPU architecture */
-#define CONFIG_ARM926EJS
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
-/* 1KHz clock tick */
-#define CONFIG_SYS_HZ 1000
-
/* UART configuration */
-#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2)
-#elif (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
+#if (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
(CONFIG_SYS_LPC32XX_UART == 7)
+#if !defined(CONFIG_LPC32XX_HSUART)
#define CONFIG_LPC32XX_HSUART
+#endif
+#endif
+
+#if !defined(CONFIG_SYS_NS16550_CLK)
+#define CONFIG_SYS_NS16550_CLK 13000000
+#endif
+
+#if !defined(CONFIG_LPC32XX_HSUART)
+#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2)
#else
-#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
+#define CONFIG_CONS_INDEX CONFIG_SYS_LPC32XX_UART
#endif
-#if defined(CONFIG_SYS_NS16550_SERIAL)
-#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ { 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+/* Ethernet */
+#define LPC32XX_ETH_BASE ETHERNET_BASE
-#define CONFIG_SYS_NS16550_COM1 UART3_BASE
-#define CONFIG_SYS_NS16550_COM2 UART4_BASE
-#define CONFIG_SYS_NS16550_COM3 UART5_BASE
-#define CONFIG_SYS_NS16550_COM4 UART6_BASE
-#endif
+/* NAND */
+#if defined(CONFIG_NAND_LPC32XX_SLC)
+#define NAND_LARGE_BLOCK_PAGE_SIZE 0x800
+#define NAND_SMALL_BLOCK_PAGE_SIZE 0x200
-#if defined(CONFIG_LPC32XX_HSUART)
-#if CONFIG_SYS_LPC32XX_UART == 1
-#define HS_UART_BASE HS_UART1_BASE
-#elif CONFIG_SYS_LPC32XX_UART == 2
-#define HS_UART_BASE HS_UART2_BASE
-#else /* CONFIG_SYS_LPC32XX_UART == 7 */
-#define HS_UART_BASE HS_UART7_BASE
+#if !defined(CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE
#endif
+
+#if (CONFIG_SYS_NAND_PAGE_SIZE == NAND_LARGE_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
+ 48, 49, 50, 51, 52, 53, 54, 55, \
+ 56, 57, 58, 59, 60, 61, 62, 63, }
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#elif (CONFIG_SYS_NAND_PAGE_SIZE == NAND_SMALL_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE 16
+#define CONFIG_SYS_NAND_ECCPOS { 10, 11, 12, 13, 14, 15, }
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#else
+#error "CONFIG_SYS_NAND_PAGE_SIZE set to an invalid value"
#endif
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
+#define CONFIG_SYS_NAND_ECCSIZE 0x100
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#endif /* CONFIG_NAND_LPC32XX_SLC */
/* NOR Flash */
#if defined(CONFIG_SYS_FLASH_CFI)
#define CONFIG_SYS_FLASH_PROTECTION
#endif
+/* USB OHCI */
+#if defined(CONFIG_USB_OHCI_LPC32XX)
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE USB_BASE
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lpc32xx-ohci"
+#endif
+
#endif /* _LPC32XX_CONFIG_H */