SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / arch / arm / include / asm / arch-omap5 / sys_proto.h

diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 9e70d48f4309258c3213cc19179c9620791b41a9..80b0c93b5eb350eefe1df6b4e2da40acb9bdb4e7 100644 (file)
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2010
  * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _SYS_PROTO_H_
@@ -12,15 +11,33 @@
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/omap_common.h>
+#include <linux/mtd/omap_gpmc.h>
 #include <asm/arch/clock.h>
+#include <asm/ti-common/sys_proto.h>
 
-DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Structure for Iodelay configuration registers.
+ * Theoretical max for g_delay is 21560 ps.
+ * Theoretical max for a_delay is 1/3rd of g_delay max.
+ * So using u16 for both a/g_delay.
+ */
+struct iodelay_cfg_entry {
+       u16 offset;
+       u16 a_delay;
+       u16 g_delay;
+};
 
 struct pad_conf_entry {
        u32 offset;
        u32 val;
 };
 
+struct mmc_platform_fixups {
+       const char *hw_rev;
+       u32 unsupported_caps;
+       u32 max_freq;
+};
+
 struct omap_sysinfo {
        char *board_string;
 };
@@ -30,13 +47,14 @@ void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
-void set_muxconf_regs_essential(void);
-void set_muxconf_regs_non_essential(void);
-void sr32(void *, u32, u32, u32);
+void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs(void);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
-void setup_clocks_for_console(void);
+void setup_early_clocks(void);
 void prcm_init(void);
+void do_board_detect(void);
+void vcores_init(void);
 void bypass_dpll(u32 const base);
 void freq_update_core(void);
 u32 get_sys_clk_freq(void);
@@ -47,64 +65,16 @@ u32 omap_sdram_size(void);
 u32 cortex_rev(void);
 void save_omap_boot_params(void);
 void init_omap_revision(void);
+void init_package_revision(void);
 void do_io_settings(void);
 void sri2c_init(void);
-void gpi2c_init(void);
 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);
 void get_ioregs(const struct ctrl_ioregs **regs);
 void srcomp_enable(void);
 void setup_warmreset_time(void);
-
-static inline u32 running_from_sdram(void)
-{
-       u32 pc;
-       asm volatile ("mov %0, pc" : "=r" (pc));
-       return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) &&
-           (pc < OMAP54XX_DRAM_ADDR_SPACE_END));
-}
-
-static inline u8 uboot_loaded_by_spl(void)
-{
-       /*
-        * u-boot can be running from sdram either because of configuration
-        * Header or by SPL. If because of CH, then the romcode sets the
-        * CHSETTINGS executed bit to true in the boot parameter structure that
-        * it passes to the bootloader.This parameter is stored in the ch_flags
-        * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
-        * mandatory section if CH is present.
-        */
-       if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
-               return 0;
-       else
-               return running_from_sdram();
-}
-/*
- * The basic hardware init of OMAP(s_init()) can happen in 4
- * different contexts:
- *  1. SPL running from SRAM
- *  2. U-Boot running from FLASH
- *  3. Non-XIP U-Boot loaded to SDRAM by SPL
- *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
- *     Configuration Header feature
- *
- * This function finds this context.
- * Defining as inline may help in compiling out unused functions in SPL
- */
-static inline u32 omap_hw_init_context(void)
-{
-#ifdef CONFIG_SPL_BUILD
-       return OMAP_INIT_CONTEXT_SPL;
-#else
-       if (uboot_loaded_by_spl())
-               return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
-       else if (running_from_sdram())
-               return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
-       else
-               return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
-#endif
-}
+const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr);
 
 static inline u32 div_round_up(u32 num, u32 den)
 {
@@ -115,4 +85,8 @@ static inline u32 usec_to_32k(u32 usec)
 {
        return div_round_up(32768 * usec, 1000000);
 }
+
+#define OMAP5_SERVICE_L2ACTLR_SET    0x104
+#define OMAP5_SERVICE_ACR_SET        0x107
+
 #endif