#define __FSL_SECURE_BOOT_H
#ifdef CONFIG_SECURE_BOOT
+
+#ifndef CONFIG_FIT_SIGNATURE
+#define CONFIG_CHAIN_OF_TRUST
+#endif
+
+#endif
+
+#ifdef CONFIG_CHAIN_OF_TRUST
#define CONFIG_CMD_ESBC_VALIDATE
#define CONFIG_FSL_SEC_MON
+#define CONFIG_SHA_HW_ACCEL
#define CONFIG_SHA_PROG_HW_ACCEL
-#define CONFIG_RSA
#define CONFIG_RSA_FREESCALE_EXP
#ifndef CONFIG_FSL_CAAM
#define CONFIG_FSL_CAAM
#endif
-#ifndef CONFIG_DM
-#define CONFIG_DM
-#endif
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Define the key hash for U-Boot here if public/private key pair used to
+ * sign U-boot are different from the SRK hash put in the fuse
+ * Example of defining KEY_HASH is
+ * #define CONFIG_SPL_UBOOT_KEY_HASH \
+ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ * else leave it defined as NULL
+ */
+#define CONFIG_SPL_UBOOT_KEY_HASH NULL
+#endif /* ifdef CONFIG_SPL_BUILD */
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_CMD_BLOB
+#define CONFIG_CMD_HASH
#define CONFIG_KEY_REVOCATION
#ifndef CONFIG_SYS_RAMBOOT
/* The key used for verification of next level images
* The feature is only applicable in case of NOR boot and is
* not applicable in case of RAMBOOT (NAND, SD, SPI).
*/
+#ifndef CONFIG_ESBC_HDR_LS
+/* Current Key EXT feature not available in LS ESBC Header */
#define CONFIG_FSL_ISBC_KEY_EXT
#endif
-#ifdef CONFIG_LS1043A
-/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */
-#define CONFIG_ESBC_ADDR_64BIT
#endif
-#ifndef CONFIG_FIT_SIGNATURE
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A)
+/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
+ * Similiarly for LS2080
+ */
+#define CONFIG_ESBC_ADDR_64BIT
+#endif
+#ifdef CONFIG_LS2080A
#define CONFIG_EXTRA_ENV \
- "setenv fdt_high 0xcfffffff;" \
+ "setenv fdt_high 0xa0000000;" \
"setenv initrd_high 0xcfffffff;" \
"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#else
+#define CONFIG_EXTRA_ENV \
+ "setenv fdt_high 0xffffffff;" \
+ "setenv initrd_high 0xffffffff;" \
+ "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#endif
-/* The address needs to be modified according to NOR memory map */
-#define CONFIG_BOOTSCRIPT_HDR_ADDR 0x600a0000
-
-#include <config_fsl_secboot.h>
+/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
+ * Non-XIP Memory (Nand/SD)*/
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) || \
+ defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTSCRIPT_COPY_RAM
#endif
+/* The address needs to be modified according to NOR, NAND, SD and
+ * DDR memory map
+ */
+#ifdef CONFIG_LS2080A
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x583920000
+#define CONFIG_BS_ADDR_DEVICE 0x583900000
+#define CONFIG_BS_HDR_ADDR_RAM 0xa3920000
+#define CONFIG_BS_ADDR_RAM 0xa3900000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BS_SIZE 0x00001000
+#else
+#ifdef CONFIG_SD_BOOT
+/* For SD boot address and size are assigned in terms of sector
+ * offset and no. of sectors respectively.
+ */
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000800
+#define CONFIG_BS_ADDR_DEVICE 0x00000840
+#define CONFIG_BS_HDR_SIZE 0x00000010
+#define CONFIG_BS_SIZE 0x00000008
+#else
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000
+#define CONFIG_BS_ADDR_DEVICE 0x60060000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BS_SIZE 0x00001000
+#endif /* #ifdef CONFIG_SD_BOOT */
+#define CONFIG_BS_HDR_ADDR_RAM 0x81000000
+#define CONFIG_BS_ADDR_RAM 0x81020000
+#endif
+
+#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
+#define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM
+#else
+#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE
+/* BOOTSCRIPT_ADDR is not required */
#endif
+#include <config_fsl_chain_trust.h>
+#endif /* #ifndef CONFIG_SPL_BUILD */
+#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
#endif