*
* Aneesh V <aneesh@ti.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _OMAP_COMMON_H_
#define _OMAP_COMMON_H_
#include <common.h>
-#define NUM_SYS_CLKS 8
+#define NUM_SYS_CLKS 7
struct prcm_regs {
/* cm1.ckgen */
u32 cm_ssc_deltamstep_dpll_ddrphy;
u32 cm_clkmode_dpll_dsp;
u32 cm_shadow_freq_config1;
+ u32 cm_clkmode_dpll_gmac;
u32 cm_mpu_mpu_clkctrl;
/* cm1.dsp */
u32 cm_div_m2_dpll_unipro;
u32 cm_ssc_deltamstep_dpll_unipro;
u32 cm_ssc_modfreqdiv_dpll_unipro;
+ u32 cm_coreaon_usb_phy_core_clkctrl;
+ u32 cm_coreaon_usb_phy2_core_clkctrl;
/* cm2.core */
u32 cm_coreaon_bandgap_clkctrl;
u32 cm_l3init_hsusbotg_clkctrl;
u32 cm_l3init_hsusbtll_clkctrl;
u32 cm_l3init_p1500_clkctrl;
+ u32 cm_l3init_sata_clkctrl;
u32 cm_l3init_fsusb_clkctrl;
u32 cm_l3init_ocp2scp1_clkctrl;
+ u32 cm_l3init_ocp2scp3_clkctrl;
+ u32 cm_l3init_usb_otg_ss_clkctrl;
u32 prm_irqstatus_mpu_2;
u32 cm_l4per_mmcsd4_clkctrl;
u32 cm_l4per_msprohg_clkctrl;
u32 cm_l4per_slimbus2_clkctrl;
+ u32 cm_l4per_qspi_clkctrl;
u32 cm_l4per_uart1_clkctrl;
u32 cm_l4per_uart2_clkctrl;
u32 cm_l4per_uart3_clkctrl;
/* l4 wkup regs */
u32 cm_abe_pll_ref_clksel;
u32 cm_sys_clksel;
+ u32 cm_abe_pll_sys_clksel;
u32 cm_wkup_clkstctrl;
u32 cm_wkup_l4wkup_clkctrl;
u32 cm_wkup_wdtimer1_clkctrl;
u32 prm_vc_val_bypass;
u32 prm_vc_cfg_i2c_mode;
u32 prm_vc_cfg_i2c_clk;
- u32 prm_sldo_core_setup;
- u32 prm_sldo_core_ctrl;
- u32 prm_sldo_mpu_setup;
- u32 prm_sldo_mpu_ctrl;
- u32 prm_sldo_mm_setup;
- u32 prm_sldo_mm_ctrl;
u32 prm_abbldo_mpu_setup;
u32 prm_abbldo_mpu_ctrl;
u32 cm_l3init_usbphy_clkctrl;
u32 cm_l4per_mcbsp4_clkctrl;
u32 prm_vc_cfg_channel;
+
+ /* SCRM stuff, used by some boards */
+ u32 scrm_auxclk0;
+ u32 scrm_auxclk1;
+
+ /* GMAC Clk Ctrl */
+ u32 cm_gmac_gmac_clkctrl;
+ u32 cm_gmac_clkstctrl;
};
struct omap_sys_ctrl_regs {
u32 control_status;
+ u32 control_core_mac_id_0_lo;
+ u32 control_core_mac_id_0_hi;
+ u32 control_core_mac_id_1_lo;
+ u32 control_core_mac_id_1_hi;
u32 control_std_fuse_opp_vdd_mpu_2;
+ u32 control_phy_power_usb;
u32 control_core_mmr_lock1;
u32 control_core_mmr_lock2;
u32 control_core_mmr_lock3;
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
u32 control_usbotghs_ctrl;
+ u32 control_phy_power_sata;
u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
u32 control_ddrio_0;
u32 control_ddrio_1;
u32 control_ddrio_2;
+ u32 control_ddr_control_ext_0;
u32 control_lpddr2io1_0;
u32 control_lpddr2io1_1;
u32 control_lpddr2io1_2;
const struct dpll_params *iva;
const struct dpll_params *usb;
const struct dpll_params *ddr;
+ const struct dpll_params *gmac;
};
struct pmic_data {
int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
};
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg: register address for efuse
+ * @reg_bits: Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+ u32 reg;
+ u8 reg_bits;
+};
+
struct volts {
u32 value;
u32 addr;
+ struct volts_efuse_data efuse;
struct pmic_data *pmic;
};
u32 get_sys_clk_index(void);
void enable_basic_clocks(void);
void enable_basic_uboot_clocks(void);
-void enable_non_essential_clocks(void);
void scale_vcores(struct vcores_data const *);
u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
u32 txdone, u32 txdone_mask, u32 opp);
s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
-/* HW Init Context */
-#define OMAP_INIT_CONTEXT_SPL 0
-#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1
-#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
-#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
+void usb_fake_mac_from_die_id(u32 *id);
/* ABB */
#define OMAP_ABB_NOMINAL_OPP 0
extern u32 *const omap_si_rev;
return *omap_si_rev;
}
+
+#define OMAP54xx 0x54000000
+
+static inline u8 is_omap54xx(void)
+{
+ extern u32 *const omap_si_rev;
+ return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
+}
+
+#define DRA7XX 0x07000000
+
+static inline u8 is_dra7xx(void)
+{
+ extern u32 *const omap_si_rev;
+ return ((*omap_si_rev & 0xFF000000) == DRA7XX);
+}
#endif
/*
#define OMAP4430_ES2_3 0x44300230
#define OMAP4460_ES1_0 0x44600100
#define OMAP4460_ES1_1 0x44600110
+#define OMAP4470_ES1_0 0x44700100
/* omap5 */
#define OMAP5430_SILICON_ID_INVALID 0
/* DRA7XX */
#define DRA752_ES1_0 0x07520100
+#define DRA752_ES1_1 0x07520110
+#define DRA722_ES1_0 0x07220100
/*
* SRAM scratch space entries
*/
-#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
#define OMAP_SRAM_SCRATCH_OMAP_REV SRAM_SCRATCH_SPACE_ADDR
#define OMAP_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4)
#define OMAP_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)