#define CR_WXN (1 << 19) /* Write Permision Imply XN */
#define CR_EE (1 << 25) /* Exception (Big) Endian */
+#define ES_TO_AARCH64 1
+#define ES_TO_AARCH32 0
+
+/*
+ * SCR_EL3 bits definitions
+ */
+#define SCR_EL3_RW_AARCH64 (1 << 10) /* Next lower level is AArch64 */
+#define SCR_EL3_RW_AARCH32 (0 << 10) /* Lower lowers level are AArch32 */
+#define SCR_EL3_HCE_EN (1 << 8) /* Hypervisor Call enable */
+#define SCR_EL3_SMD_DIS (1 << 7) /* Secure Monitor Call disable */
+#define SCR_EL3_RES1 (3 << 4) /* Reserved, RES1 */
+#define SCR_EL3_NS_EN (1 << 0) /* EL0 and EL1 in Non-scure state */
+
+/*
+ * SPSR_EL3/SPSR_EL2 bits definitions
+ */
+#define SPSR_EL_END_LE (0 << 9) /* Exception Little-endian */
+#define SPSR_EL_DEBUG_MASK (1 << 9) /* Debug exception masked */
+#define SPSR_EL_ASYN_MASK (1 << 8) /* Asynchronous data abort masked */
+#define SPSR_EL_SERR_MASK (1 << 8) /* System Error exception masked */
+#define SPSR_EL_IRQ_MASK (1 << 7) /* IRQ exception masked */
+#define SPSR_EL_FIQ_MASK (1 << 6) /* FIQ exception masked */
+#define SPSR_EL_T_A32 (0 << 5) /* AArch32 instruction set A32 */
+#define SPSR_EL_M_AARCH64 (0 << 4) /* Exception taken from AArch64 */
+#define SPSR_EL_M_AARCH32 (1 << 4) /* Exception taken from AArch32 */
+#define SPSR_EL_M_SVC (0x3) /* Exception taken from SVC mode */
+#define SPSR_EL_M_HYP (0xa) /* Exception taken from HYP mode */
+#define SPSR_EL_M_EL1H (5) /* Exception taken from EL1h mode */
+#define SPSR_EL_M_EL2H (9) /* Exception taken from EL2h mode */
+
+/*
+ * CPTR_EL2 bits definitions
+ */
+#define CPTR_EL2_RES1 (3 << 12 | 0x3ff) /* Reserved, RES1 */
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define SCTLR_EL2_RES1 (3 << 28 | 3 << 22 | 1 << 18 | 1 << 16 |\
+ 1 << 11 | 3 << 4) /* Reserved, RES1 */
+#define SCTLR_EL2_EE_LE (0 << 25) /* Exception Little-endian */
+#define SCTLR_EL2_WXN_DIS (0 << 19) /* Write permission is not XN */
+#define SCTLR_EL2_ICACHE_DIS (0 << 12) /* Instruction cache disabled */
+#define SCTLR_EL2_SA_DIS (0 << 3) /* Stack Alignment Check disabled */
+#define SCTLR_EL2_DCACHE_DIS (0 << 2) /* Data cache disabled */
+#define SCTLR_EL2_ALIGN_DIS (0 << 1) /* Alignment check disabled */
+#define SCTLR_EL2_MMU_DIS (0) /* MMU disabled */
+
+/*
+ * CNTHCTL_EL2 bits definitions
+ */
+#define CNTHCTL_EL2_EL1PCEN_EN (1 << 1) /* Physical timer regs accessible */
+#define CNTHCTL_EL2_EL1PCTEN_EN (1 << 0) /* Physical counter accessible */
+
+/*
+ * HCR_EL2 bits definitions
+ */
+#define HCR_EL2_RW_AARCH64 (1 << 31) /* EL1 is AArch64 */
+#define HCR_EL2_RW_AARCH32 (0 << 31) /* Lower levels are AArch32 */
+#define HCR_EL2_HCD_DIS (1 << 29) /* Hypervisor Call disabled */
+
+/*
+ * CPACR_EL1 bits definitions
+ */
+#define CPACR_EL1_FPEN_EN (3 << 20) /* SIMD and FP instruction enabled */
+
+/*
+ * SCTLR_EL1 bits definitions
+ */
+#define SCTLR_EL1_RES1 (3 << 28 | 3 << 22 | 1 << 20 |\
+ 1 << 11) /* Reserved, RES1 */
+#define SCTLR_EL1_UCI_DIS (0 << 26) /* Cache instruction disabled */
+#define SCTLR_EL1_EE_LE (0 << 25) /* Exception Little-endian */
+#define SCTLR_EL1_WXN_DIS (0 << 19) /* Write permission is not XN */
+#define SCTLR_EL1_NTWE_DIS (0 << 18) /* WFE instruction disabled */
+#define SCTLR_EL1_NTWI_DIS (0 << 16) /* WFI instruction disabled */
+#define SCTLR_EL1_UCT_DIS (0 << 15) /* CTR_EL0 access disabled */
+#define SCTLR_EL1_DZE_DIS (0 << 14) /* DC ZVA instruction disabled */
+#define SCTLR_EL1_ICACHE_DIS (0 << 12) /* Instruction cache disabled */
+#define SCTLR_EL1_UMA_DIS (0 << 9) /* User Mask Access disabled */
+#define SCTLR_EL1_SED_EN (0 << 8) /* SETEND instruction enabled */
+#define SCTLR_EL1_ITD_EN (0 << 7) /* IT instruction enabled */
+#define SCTLR_EL1_CP15BEN_DIS (0 << 5) /* CP15 barrier operation disabled */
+#define SCTLR_EL1_SA0_DIS (0 << 4) /* Stack Alignment EL0 disabled */
+#define SCTLR_EL1_SA_DIS (0 << 3) /* Stack Alignment EL1 disabled */
+#define SCTLR_EL1_DCACHE_DIS (0 << 2) /* Data cache disabled */
+#define SCTLR_EL1_ALIGN_DIS (0 << 1) /* Alignment check disabled */
+#define SCTLR_EL1_MMU_DIS (0) /* MMU disabled */
+
#ifndef __ASSEMBLY__
u64 get_page_table_size(void);
void __asm_flush_dcache_all(void);
void __asm_invalidate_dcache_all(void);
void __asm_flush_dcache_range(u64 start, u64 end);
+
+/**
+ * __asm_invalidate_dcache_range() - Invalidate a range of virtual addresses
+ *
+ * This performance an invalidate from @start to @end - 1. Both addresses
+ * should be cache-aligned, otherwise this function will align the start
+ * address and may continue past the end address.
+ *
+ * Data in the address range is evicted from the cache and is not written back
+ * to memory.
+ *
+ * @start: Start address to invalidate
+ * @end: End address to invalidate up to (exclusive)
+ */
+void __asm_invalidate_dcache_range(u64 start, u64 end);
void __asm_invalidate_tlb_all(void);
void __asm_invalidate_icache_all(void);
int __asm_invalidate_l3_dcache(void);
int __asm_invalidate_l3_icache(void);
void __asm_switch_ttbr(u64 new_ttbr);
-void armv8_switch_to_el2(void);
-void armv8_switch_to_el1(void);
+/*
+ * Switch from EL3 to EL2 for ARMv8
+ *
+ * @args: For loading 64-bit OS, fdt address.
+ * For loading 32-bit OS, zero.
+ * @mach_nr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, machine nr
+ * @fdt_addr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, fdt address.
+ * @arg4: Input argument.
+ * @entry_point: kernel entry point
+ * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void __noreturn armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 arg4, u64 entry_point, u64 es_flag);
+/*
+ * Switch from EL2 to EL1 for ARMv8
+ *
+ * @args: For loading 64-bit OS, fdt address.
+ * For loading 32-bit OS, zero.
+ * @mach_nr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, machine nr
+ * @fdt_addr: For loading 64-bit OS, zero.
+ * For loading 32-bit OS, fdt address.
+ * @arg4: Input argument.
+ * @entry_point: kernel entry point
+ * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
+ */
+void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 arg4, u64 entry_point, u64 es_flag);
+void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 arg4, u64 entry_point);
void gic_init(void);
void gic_send_sgi(unsigned long sgino);
void wait_for_wakeup(void);
void smp_kick_all_cpus(void);
void flush_l3_cache(void);
+void mmu_change_region_attr(phys_addr_t start, size_t size, u64 attrs);
/*
*Issue a secure monitor call in accordance with ARM "SMC Calling convention",
void __noreturn psci_system_reset(void);
void __noreturn psci_system_off(void);
+#ifdef CONFIG_ARMV8_PSCI
+extern char __secure_start[];
+extern char __secure_end[];
+extern char __secure_stack_start[];
+extern char __secure_stack_end[];
+
+void armv8_setup_psci(void);
+void psci_setup_vectors(void);
+void psci_arch_init(void);
+#endif
+
#endif /* __ASSEMBLY__ */
#else /* CONFIG_ARM64 */
#ifndef __ASSEMBLY__
-/**
- * save_boot_params() - Save boot parameters before starting reset sequence
- *
- * If you provide this function it will be called immediately U-Boot starts,
- * both for SPL and U-Boot proper.
- *
- * All registers are unchanged from U-Boot entry. No registers need be
- * preserved.
- *
- * This is not a normal C function. There is no stack. Return by branching to
- * save_boot_params_ret.
- *
- * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
- */
-
-/**
- * save_boot_params_ret() - Return from save_boot_params()
- *
- * If you provide save_boot_params(), then you should jump back to this
- * function when done. Try to preserve all registers.
- *
- * If your implementation of save_boot_params() is in C then it is acceptable
- * to simply call save_boot_params_ret() at the end of your function. Since
- * there is no link register set up, you cannot just exit the function. U-Boot
- * will return to the (initialised) value of lr, and likely crash/hang.
- *
- * If your implementation of save_boot_params() is in assembler then you
- * should use 'b' or 'bx' to return to save_boot_params_ret.
- */
-void save_boot_params_ret(void);
-
#ifdef CONFIG_ARMV7_LPAE
void switch_to_hypervisor_ret(void);
#endif
#endif /* CONFIG_ARM64 */
#ifndef __ASSEMBLY__
+/**
+ * save_boot_params() - Save boot parameters before starting reset sequence
+ *
+ * If you provide this function it will be called immediately U-Boot starts,
+ * both for SPL and U-Boot proper.
+ *
+ * All registers are unchanged from U-Boot entry. No registers need be
+ * preserved.
+ *
+ * This is not a normal C function. There is no stack. Return by branching to
+ * save_boot_params_ret.
+ *
+ * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
+ */
+
+/**
+ * save_boot_params_ret() - Return from save_boot_params()
+ *
+ * If you provide save_boot_params(), then you should jump back to this
+ * function when done. Try to preserve all registers.
+ *
+ * If your implementation of save_boot_params() is in C then it is acceptable
+ * to simply call save_boot_params_ret() at the end of your function. Since
+ * there is no link register set up, you cannot just exit the function. U-Boot
+ * will return to the (initialised) value of lr, and likely crash/hang.
+ *
+ * If your implementation of save_boot_params() is in assembler then you
+ * should use 'b' or 'bx' to return to save_boot_params_ret.
+ */
+void save_boot_params_ret(void);
+
/**
* Change the cache settings for a region.
*
projects / u-boot / blobdiff