at91: ma5d4evk: Enable DM

[u-boot] / arch / arm / mach-at91 / Kconfig

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 20f7eeaf0913285c8a5d44a03631d20996f5a727..4dfddcc287a7a29bc882149377f50e4b23e30e57 100644 (file)
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,60 @@
 if ARCH_AT91
 
+config AT91FAMILY
+       def_bool y
+
+config AT91SAM9260
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9G20
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9XE
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9261
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9263
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9G45
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9M10G45
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9N12
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9RL
+       bool
+       select CPU_ARM926EJS
+
+config AT91SAM9X5
+       bool
+       select CPU_ARM926EJS
+
+config SAMA5D2
+       bool
+       select CPU_V7
+
+config SAMA5D3
+       bool
+       select CPU_V7
+
+config SAMA5D4
+       bool
+       select CPU_V7
+
 choice
        prompt "Atmel AT91 board select"
        optional
@@ -10,132 +65,150 @@ config TARGET_AT91RM9200EK
 
 config TARGET_AT91SAM9260EK
        bool "Atmel at91sam9260 reference board"
-       select CPU_ARM926EJS
+       select AT91SAM9260
        select BOARD_EARLY_INIT_F
 
 config TARGET_ETHERNUT5
        bool "Ethernut5 board"
-       select CPU_ARM926EJS
+       select AT91SAM9XE
 
 config TARGET_SNAPPER9260
        bool "Support snapper9260"
-       select CPU_ARM926EJS
+       select AT91SAM9260
        select DM
        select DM_SERIAL
        select DM_GPIO
 
 config TARGET_GURNARD
        bool "Support gurnard"
+       select AT91SAM9G45
        select BOARD_LATE_INIT
-       select CPU_ARM926EJS
        select DM
        select DM_SERIAL
+       select DM_SPI
        select DM_GPIO
        select DM_ETH
 
 config TARGET_AT91SAM9261EK
        bool "Atmel at91sam9261 reference board"
-       select CPU_ARM926EJS
+       select AT91SAM9261
        select BOARD_EARLY_INIT_F
 
 config TARGET_PM9261
        bool "Ronetix pm9261 board"
-       select CPU_ARM926EJS
+       select AT91SAM9261
 
 config TARGET_AT91SAM9263EK
        bool "Atmel at91sam9263 reference board"
-       select CPU_ARM926EJS
+       select AT91SAM9263
        select BOARD_EARLY_INIT_F
 
 config TARGET_USB_A9263
        bool "Caloa USB A9260 board"
-       select CPU_ARM926EJS
+       select AT91SAM9263
 
 config TARGET_PM9263
        bool "Ronetix pm9263 board"
-       select CPU_ARM926EJS
+       select AT91SAM9263
 
 config TARGET_AT91SAM9M10G45EK
        bool "Atmel AT91SAM9M10G45-EK board"
-       select CPU_ARM926EJS
+       select AT91SAM9M10G45
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
 
 config TARGET_PM9G45
        bool "Ronetix pm9g45 board"
-       select CPU_ARM926EJS
+       select AT91SAM9G45
 
 config TARGET_PICOSAM9G45
        bool "Mini-box picosam9g45 board"
-       select CPU_ARM926EJS
+       select AT91SAM9M10G45
        select SUPPORT_SPL
 
 config TARGET_AT91SAM9N12EK
        bool "Atmel AT91SAM9N12-EK board"
-       select CPU_ARM926EJS
+       select AT91SAM9N12
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
 
 config TARGET_AT91SAM9RLEK
        bool "Atmel at91sam9rl reference board"
-       select CPU_ARM926EJS
+       select AT91SAM9RL
        select BOARD_EARLY_INIT_F
 
 config TARGET_AT91SAM9X5EK
        bool "Atmel AT91SAM9X5-EK board"
-       select CPU_ARM926EJS
+       select AT91SAM9X5
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select BOARD_LATE_INIT
 
-config TARGET_SAMA5D2_PTC
-       bool "SAMA5D2 PTC board"
-       select CPU_V7
-       select SUPPORT_SPL
+config TARGET_SAMA5D2_PTC_EK
+       bool "SAMA5D2 PTC EK board"
+       select SAMA5D2
        select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D2_XPLAINED
        bool "SAMA5D2 Xplained board"
+       select SAMA5D2
+       select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
+       select BOARD_LATE_INIT
+
+config TARGET_SAMA5D27_SOM1_EK
+       bool "SAMA5D27 SOM1 EK board"
        select CPU_V7
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select BOARD_LATE_INIT
+       help
+         The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package),
+         a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM
+         24AA02E48. The SAMA5D2 SiP integrates the ARM Cortex-A5
+         processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM
+         in a single package.
 
 config TARGET_SAMA5D3_XPLAINED
        bool "SAMA5D3 Xplained board"
-       select CPU_V7
+       select SAMA5D3
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D3XEK
        bool "SAMA5D3X-EK board"
+       select SAMA5D3
        select BOARD_LATE_INIT
-       select CPU_V7
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
 
 config TARGET_SAMA5D4_XPLAINED
        bool "SAMA5D4 Xplained board"
-       select CPU_V7
+       select SAMA5D4
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select BOARD_LATE_INIT
 
 config TARGET_SAMA5D4EK
        bool "SAMA5D4 Evaluation Kit"
-       select CPU_V7
+       select SAMA5D4
        select SUPPORT_SPL
        select BOARD_EARLY_INIT_F
+       select BOARD_LATE_INIT
 
 config TARGET_MA5D4EVK
        bool "Aries MA5D4EVK Evaluation Kit"
-       select CPU_V7
+       select SAMA5D4
        select SUPPORT_SPL
+       select DM
 
 config TARGET_MEESC
        bool "Support meesc"
-       select CPU_ARM926EJS
+       select AT91SAM9263
 
 config TARGET_CORVUS
        bool "Support corvus"
-       select CPU_ARM926EJS
+       select AT91SAM9M10G45
        select SUPPORT_SPL
        select DM
        select DM_SERIAL
@@ -144,16 +217,17 @@ config TARGET_CORVUS
 
 config TARGET_TAURUS
        bool "Support taurus"
-       select CPU_ARM926EJS
+       select AT91SAM9G20
        select SUPPORT_SPL
        select DM
        select DM_SERIAL
+       select DM_SPI
        select DM_GPIO
        select DM_ETH
 
 config TARGET_SMARTWEB
        bool "Support smartweb"
-       select CPU_ARM926EJS
+       select AT91SAM9260
        select SUPPORT_SPL
        select DM
        select DM_SERIAL
@@ -162,8 +236,22 @@ config TARGET_SMARTWEB
 
 config TARGET_VINCO
        bool "Support VINCO"
+       select SAMA5D4
+       select SUPPORT_SPL
+       select DM
+       select DM_SPI
+
+config TARGET_WB45N
+       bool "Support Laird WB45N"
+       select CPU_ARM926EJS
+       select SUPPORT_SPL
+
+config TARGET_WB50N
+       bool "Support Laird WB50N"
+       select BOARD_LATE_INIT
        select CPU_V7
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
 
 endchoice
 
@@ -179,8 +267,9 @@ source "board/atmel/at91sam9m10g45ek/Kconfig"
 source "board/atmel/at91sam9n12ek/Kconfig"
 source "board/atmel/at91sam9rlek/Kconfig"
 source "board/atmel/at91sam9x5ek/Kconfig"
-source "board/atmel/sama5d2_ptc/Kconfig"
+source "board/atmel/sama5d2_ptc_ek/Kconfig"
 source "board/atmel/sama5d2_xplained/Kconfig"
+source "board/atmel/sama5d27_som1_ek/Kconfig"
 source "board/atmel/sama5d3_xplained/Kconfig"
 source "board/atmel/sama5d3xek/Kconfig"
 source "board/atmel/sama5d4_xplained/Kconfig"
@@ -198,6 +287,8 @@ source "board/ronetix/pm9g45/Kconfig"
 source "board/siemens/corvus/Kconfig"
 source "board/siemens/taurus/Kconfig"
 source "board/siemens/smartweb/Kconfig"
+source "board/laird/wb45n/Kconfig"
+source "board/laird/wb50n/Kconfig"
 
 config SPL_LDSCRIPT
        default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS