config BCM2835
bool "Broadcom BCM2835 SoC support"
depends on ARCH_BCM283X
+ select CPU_ARM1176
config BCM2836
bool "Broadcom BCM2836 SoC support"
depends on ARCH_BCM283X
+ select ARMV7_LPAE
+ select CPU_V7
config BCM2837
bool "Broadcom BCM2837 SoC support"
depends on ARCH_BCM283X
+config BCM2837_32B
+ bool "Broadcom BCM2837 SoC 32-bit support"
+ depends on ARCH_BCM283X
+ select BCM2837
+ select ARMV7_LPAE
+ select CPU_V7
+
+config BCM2837_64B
+ bool "Broadcom BCM2837 SoC 64-bit support"
+ depends on ARCH_BCM283X
+ select BCM2837
+ select ARM64
+
menu "Broadcom BCM283X family"
depends on ARCH_BCM283X
This option creates a build targetting the ARM1176 ISA.
select BCM2835
- select CPU_ARM1176
config TARGET_RPI_2
bool "Raspberry Pi 2"
https://github.com/raspberrypi/firmware/issues/572".
This option creates a build targetting the ARMv7/AArch32 ISA.
- select ARMV7_LPAE
select BCM2836
- select CPU_V7
config TARGET_RPI_3_32B
bool "Raspberry Pi 3 32-bit build"
This option assumes the VideoCore firmware is configured to use the
mini UART (rather than PL011) for the serial console. This is the
default on the RPi 3. To enable the UART console, the following non-
- default option must be present in config.txt: enable_uart=1.
+ default option must be present in config.txt: enable_uart=1. This is
+ required for U-Boot to operate correctly, even if you only care
+ about the HDMI/usbkbd console.
This option creates a build targetting the ARMv7/AArch32 ISA.
- select ARMV7_LPAE
- select BCM2837
- select CPU_V7
+ select BCM2837_32B
config TARGET_RPI_3
bool "Raspberry Pi 3 64-bit build"
- select ARM64
- select BCM2837
+ help
+ Support for all BCM2837-based Raspberry Pi variants, such as
+ the RPi 3 model B, in AArch64 (64-bit) mode.
+
+ This option assumes the VideoCore firmware is configured to use the
+ mini UART (rather than PL011) for the serial console. This is the
+ default on the RPi 3. To enable the UART console, the following non-
+ default option must be present in config.txt: enable_uart=1. This is
+ required for U-Boot to operate correctly, even if you only care
+ about the HDMI/usbkbd console.
+
+ At the time of writing, the VC FW requires a non-default option in
+ config.txt to request the ARM CPU boot in 64-bit mode:
+ arm_control=0x200
+
+ The VC FW typically provides ARM "stub" code to set up the CPU and
+ quiesce secondary SMP CPUs. This is not currently true in 64-bit
+ mode. In order to boot U-Boot before the VC FW is enhanced, please
+ see the commit description for the commit which added RPi3 support
+ for a workaround. Since the instructions are temporary, they are not
+ duplicated here. The VC FW enhancement is tracked in
+ https://github.com/raspberrypi/firmware/issues/579.
+
+ This option creates a build targetting the ARMv8/AArch64 ISA.
+ select BCM2837_64B
endchoice
config SYS_BOARD
- default "rpi" if TARGET_RPI
- default "rpi_2" if TARGET_RPI_2
- default "rpi_3_32b" if TARGET_RPI_3_32B
- default "rpi_3" if TARGET_RPI_3
+ default "rpi"
config SYS_VENDOR
default "raspberrypi"
default "bcm283x"
config SYS_CONFIG_NAME
- default "rpi" if TARGET_RPI
- default "rpi_2" if TARGET_RPI_2
- default "rpi_3_32b" if TARGET_RPI_3_32B
- default "rpi_3" if TARGET_RPI_3
+ default "rpi"
endmenu