omap-common: Common serial and usbethaddr functions based on die id

[u-boot] / arch / arm / mach-mvebu / spl.c

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 402e520ea996edf44d487b2c41a802af2482208b..0ab729aa5d87ca3cc0dcefa2532ffdaff2622e55 100644 (file)
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -14,25 +14,65 @@ DECLARE_GLOBAL_DATA_PTR;
 
 u32 spl_boot_device(void)
 {
-       /* Right now only booting via SPI NOR flash is supported */
+#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
        return BOOT_DEVICE_SPI;
+#endif
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+       return BOOT_DEVICE_MMC1;
+#endif
 }
 
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(void)
+{
+       return MMCSD_MODE_RAW;
+}
+#endif
+
 void board_init_f(ulong dummy)
 {
-       /* Set global data pointer */
-       gd = &gdata;
+#ifndef CONFIG_MVEBU_BOOTROM_UARTBOOT
+       /*
+        * Only call arch_cpu_init() when not returning to the
+        * Marvell BootROM, which is done when booting via
+        * the xmodem protocol (kwboot tool). Otherwise the
+        * internal register will get remapped and the BootROM
+        * can't continue to run correctly.
+        */
 
        /* Linux expects the internal registers to be at 0xf1000000 */
        arch_cpu_init();
+#endif
+
+       /*
+        * Pin muxing needs to be done before UART output, since
+        * on A38x the UART pins need some re-muxing for output
+        * to work.
+        */
+       board_early_init_f();
 
        preloader_console_init();
 
+       timer_init();
+
        /* First init the serdes PHY's */
        serdes_phy_config();
 
        /* Setup DDR */
        ddr3_init();
 
-       board_init_r(NULL, 0);
+#ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
+       /*
+        * Return to the BootROM to continue the Marvell xmodem
+        * UART boot protocol. As initiated by the kwboot tool.
+        *
+        * This can only be done by the BootROM and not by the
+        * U-Boot SPL infrastructure, since the beginning of the
+        * image is already read and interpreted by the BootROM.
+        * SPL has no chance to receive this information. So we
+        * need to return to the BootROM to enable this xmodem
+        * UART download.
+        */
+       return_to_bootrom();
+#endif
 }