/*
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
u32 spl_boot_device(void)
{
- /* Right now only booting via SPI NOR flash is supported */
+#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
return BOOT_DEVICE_SPI;
+#endif
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+ return BOOT_DEVICE_MMC1;
+#endif
}
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+#endif
+
void board_init_f(ulong dummy)
{
- /* Set global data pointer */
- gd = &gdata;
+ int ret;
+
+#ifndef CONFIG_MVEBU_BOOTROM_UARTBOOT
+ /*
+ * Only call arch_cpu_init() when not returning to the
+ * Marvell BootROM, which is done when booting via
+ * the xmodem protocol (kwboot tool). Otherwise the
+ * internal register will get remapped and the BootROM
+ * can't continue to run correctly.
+ */
/* Linux expects the internal registers to be at 0xf1000000 */
arch_cpu_init();
+#endif
+
+ /*
+ * Pin muxing needs to be done before UART output, since
+ * on A38x the UART pins need some re-muxing for output
+ * to work.
+ */
+ board_early_init_f();
+
+ /* Example code showing how to enable the debug UART on MVEBU */
+#ifdef EARLY_UART
+ /*
+ * Debug UART can be used from here if required:
+ *
+ * debug_uart_init();
+ * printch('a');
+ * printhex8(0x1234);
+ * printascii("string");
+ */
+#endif
+
+ ret = spl_init();
+ if (ret) {
+ debug("spl_init() failed: %d\n", ret);
+ hang();
+ }
+
+ /* Use special translation offset for SPL */
+ dm_set_translation_offset(0xd0000000 - 0xf1000000);
preloader_console_init();
+ timer_init();
+
/* First init the serdes PHY's */
serdes_phy_config();
/* Setup DDR */
ddr3_init();
- board_init_r(NULL, 0);
+#ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
+ /*
+ * Return to the BootROM to continue the Marvell xmodem
+ * UART boot protocol. As initiated by the kwboot tool.
+ *
+ * This can only be done by the BootROM and not by the
+ * U-Boot SPL infrastructure, since the beginning of the
+ * image is already read and interpreted by the BootROM.
+ * SPL has no chance to receive this information. So we
+ * need to return to the BootROM to enable this xmodem
+ * UART download.
+ */
+ return_to_bootrom();
+#endif
}