mmc: tegra: Add DM_MMC support to Tegra MMC driver

[u-boot] / arch / arm / mach-tegra / Kconfig

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index fbfb204e6ec87f3e926e52ecd3e5bcf749cdfd1e..fb4b32e8b797c8463a7e8affa2ba1b513cb1fb7e 100644 (file)
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,17 +1,41 @@
 if TEGRA
 
+config SPL_GPIO_SUPPORT
+       default y
+
+config SPL_LIBCOMMON_SUPPORT
+       default y
+
+config SPL_LIBGENERIC_SUPPORT
+       default y
+
+config SPL_SERIAL_SUPPORT
+       default y
+
+config TEGRA_IVC
+       bool "Tegra IVC protocol"
+       help
+         IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
+         (Inter Processor Communication) framework. Within the context of
+         U-Boot, it is typically used for communication between the main CPU
+         and various auxiliary processors.
+
 config TEGRA_COMMON
        bool "Tegra common options"
        select DM
+       select DM_ETH
        select DM_GPIO
        select DM_I2C
        select DM_KEYBOARD
+       select DM_MMC
        select DM_PCI
        select DM_PCI_COMPAT
+       select DM_PWM
        select DM_SERIAL
        select DM_SPI
        select DM_SPI_FLASH
        select OF_CONTROL
+       select VIDCONSOLE_AS_LCD if DM_VIDEO
 
 config TEGRA_ARMV7_COMMON
        bool "Tegra 32-bit common options"
@@ -19,6 +43,7 @@ config TEGRA_ARMV7_COMMON
        select SPL
        select SUPPORT_SPL
        select TEGRA_COMMON
+       select TEGRA_GPIO
 
 config TEGRA_ARMV8_COMMON
        bool "Tegra 64-bit common options"
@@ -47,10 +72,38 @@ config TEGRA124
 
 config TEGRA210
        bool "Tegra210 family"
+       select TEGRA_GPIO
+       select TEGRA_ARMV8_COMMON
+
+config TEGRA186
+       bool "Tegra186 family"
+       select CLK
+       select DM_MAILBOX
+       select DM_RESET
+       select MISC
+       select TEGRA186_BPMP
+       select TEGRA186_CLOCK
+       select TEGRA186_GPIO
+       select TEGRA186_RESET
        select TEGRA_ARMV8_COMMON
+       select TEGRA_HSP
+       select TEGRA_IVC
 
 endchoice
 
+config TEGRA_DISCONNECT_UDC_ON_BOOT
+       bool "Disconnect USB device mode controller on boot"
+       default y
+       help
+         When loading U-Boot into RAM over USB protocols using tools such as
+         tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
+         mode controller is initialized and enumerated by the host PC running
+         the tool. Unfortunately, these tools do not shut down the USB
+         controller before executing the downloaded code, and so the host PC
+         does not "de-enumerate" the USB device. This option shuts down the
+         USB controller when U-Boot boots to avoid leaving a stale USB device
+         present.
+
 config SYS_MALLOC_F_LEN
        default 0x1800
 
@@ -59,5 +112,6 @@ source "arch/arm/mach-tegra/tegra30/Kconfig"
 source "arch/arm/mach-tegra/tegra114/Kconfig"
 source "arch/arm/mach-tegra/tegra124/Kconfig"
 source "arch/arm/mach-tegra/tegra210/Kconfig"
+source "arch/arm/mach-tegra/tegra186/Kconfig"
 
 endif