if TEGRA
-config TEGRA_ARMV7_COMMON
- bool "Tegra 32-bit"
- select SUPPORT_SPL
- select SPL
- select OF_CONTROL
- select CPU_V7
+config SPL_GPIO_SUPPORT
+ default y
+
+config SPL_LIBCOMMON_SUPPORT
+ default y
+
+config SPL_LIBGENERIC_SUPPORT
+ default y
+
+config SPL_SERIAL_SUPPORT
+ default y
+
+config TEGRA_IVC
+ bool "Tegra IVC protocol"
+ help
+ IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
+ (Inter Processor Communication) framework. Within the context of
+ U-Boot, it is typically used for communication between the main CPU
+ and various auxiliary processors.
+
+config TEGRA_COMMON
+ bool "Tegra common options"
select DM
- select DM_SPI_FLASH
- select DM_SERIAL
- select DM_I2C
- select DM_SPI
+ select DM_ETH
select DM_GPIO
+ select DM_I2C
select DM_KEYBOARD
+ select DM_MMC
+ select DM_PCI
+ select DM_PCI_COMPAT
+ select DM_PWM
+ select DM_SERIAL
+ select DM_SPI
+ select DM_SPI_FLASH
+ select OF_CONTROL
+ select VIDCONSOLE_AS_LCD if DM_VIDEO
+
+config TEGRA_ARMV7_COMMON
+ bool "Tegra 32-bit common options"
+ select CPU_V7
+ select SPL
+ select SUPPORT_SPL
+ select TEGRA_COMMON
+ select TEGRA_GPIO
+
+config TEGRA_ARMV8_COMMON
+ bool "Tegra 64-bit common options"
+ select ARM64
+ select TEGRA_COMMON
choice
prompt "Tegra SoC select"
config TEGRA210
bool "Tegra210 family"
- select OF_CONTROL
- select ARM64
- select DM
- select DM_SPI_FLASH
- select DM_SERIAL
- select DM_I2C
- select DM_SPI
- select DM_GPIO
+ select TEGRA_GPIO
+ select TEGRA_ARMV8_COMMON
+
+config TEGRA186
+ bool "Tegra186 family"
+ select CLK
+ select DM_MAILBOX
+ select DM_RESET
+ select MISC
+ select TEGRA186_BPMP
+ select TEGRA186_CLOCK
+ select TEGRA186_GPIO
+ select TEGRA186_RESET
+ select TEGRA_ARMV8_COMMON
+ select TEGRA_HSP
+ select TEGRA_IVC
endchoice
+config TEGRA_DISCONNECT_UDC_ON_BOOT
+ bool "Disconnect USB device mode controller on boot"
+ default y
+ help
+ When loading U-Boot into RAM over USB protocols using tools such as
+ tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
+ mode controller is initialized and enumerated by the host PC running
+ the tool. Unfortunately, these tools do not shut down the USB
+ controller before executing the downloaded code, and so the host PC
+ does not "de-enumerate" the USB device. This option shuts down the
+ USB controller when U-Boot boots to avoid leaving a stale USB device
+ present.
+
config SYS_MALLOC_F_LEN
default 0x1800
source "arch/arm/mach-tegra/tegra114/Kconfig"
source "arch/arm/mach-tegra/tegra124/Kconfig"
source "arch/arm/mach-tegra/tegra210/Kconfig"
+source "arch/arm/mach-tegra/tegra186/Kconfig"
endif