env: Rename setenv() to env_set()

[u-boot] / arch / arm / mach-tegra / board2.c

diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index 9158ace44c4248d932843ef9b0871345618678b2..0426b7a95a963c547b22ecffa9b30c73671023fc 100644 (file)
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -9,14 +9,8 @@
 #include <dm.h>
 #include <errno.h>
 #include <ns16550.h>
-#include <linux/compiler.h>
-#include <linux/sizes.h>
+#include <usb.h>
 #include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/funcmux.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/pmu.h>
-#include <asm/arch/tegra.h>
 #include <asm/arch-tegra/ap.h>
 #include <asm/arch-tegra/board.h>
 #include <asm/arch-tegra/clk_rst.h>
@@ -25,21 +19,16 @@
 #include <asm/arch-tegra/uart.h>
 #include <asm/arch-tegra/warmboot.h>
 #include <asm/arch-tegra/gpu.h>
+#include <asm/arch-tegra/usb.h>
+#include <asm/arch-tegra/xusb-padctl.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/pmu.h>
+#include <asm/arch/tegra.h>
 #ifdef CONFIG_TEGRA_CLOCK_SCALING
 #include <asm/arch/emc.h>
 #endif
-#include <asm/arch-tegra/usb.h>
-#ifdef CONFIG_USB_EHCI_TEGRA
-#include <usb.h>
-#endif
-#ifdef CONFIG_TEGRA_MMC
-#include <asm/arch-tegra/tegra_mmc.h>
-#include <asm/arch-tegra/mmc.h>
-#endif
-#include <asm/arch-tegra/xusb-padctl.h>
-#include <power/as3722.h>
-#include <i2c.h>
-#include <spi.h>
 #include "emc.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -54,6 +43,7 @@ U_BOOT_DEVICE(tegra_gpios) = {
 __weak void pinmux_init(void) {}
 __weak void pin_mux_usb(void) {}
 __weak void pin_mux_spi(void) {}
+__weak void pin_mux_mmc(void) {}
 __weak void gpio_early_init_uart(void) {}
 __weak void pin_mux_display(void) {}
 __weak void start_cpu_fan(void) {}
@@ -128,6 +118,10 @@ int board_init(void)
        pin_mux_spi();
 #endif
 
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+       pin_mux_mmc();
+#endif
+
        /* Init is handled automatically in the driver-model case */
 #if defined(CONFIG_DM_VIDEO)
        pin_mux_display();
@@ -147,11 +141,6 @@ int board_init(void)
                debug("Memory controller init failed: %d\n", err);
 #  endif
 # endif /* CONFIG_TEGRA_PMU */
-#ifdef CONFIG_AS3722_POWER
-       err = as3722_init(NULL);
-       if (err && err != -ENODEV)
-               return err;
-#endif
 #endif /* CONFIG_SYS_I2C_TEGRA */
 
 #ifdef CONFIG_USB_EHCI_TEGRA
@@ -161,15 +150,17 @@ int board_init(void)
 #if defined(CONFIG_DM_VIDEO)
        board_id = tegra_board_id();
        err = tegra_lcd_pmic_init(board_id);
-       if (err)
+       if (err) {
+               debug("Failed to set up LCD PMIC\n");
                return err;
+       }
 #endif
 
 #ifdef CONFIG_TEGRA_NAND
        pin_mux_nand();
 #endif
 
-       tegra_xusb_padctl_init(gd->fdt_blob);
+       tegra_xusb_padctl_init();
 
 #ifdef CONFIG_TEGRA_LP0
        /* save Sdram params to PMC 2, 4, and 24 for WB0 */
@@ -190,6 +181,9 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
 
 int board_early_init_f(void)
 {
+       if (!clock_early_init_done())
+               clock_early_init();
+
 #if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT)
 #define USBCMD_FS2 (1 << 15)
        {
@@ -220,9 +214,9 @@ int board_late_init(void)
 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
        if (tegra_cpu_is_non_secure()) {
                printf("CPU is in NS mode\n");
-               setenv("cpu_ns_mode", "1");
+               env_set("cpu_ns_mode", "1");
        } else {
-               setenv("cpu_ns_mode", "");
+               env_set("cpu_ns_mode", "");
        }
 #endif
        start_cpu_fan();
@@ -230,54 +224,6 @@ int board_late_init(void)
        return 0;
 }
 
-#if defined(CONFIG_TEGRA_MMC)
-__weak void pin_mux_mmc(void)
-{
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-       debug("%s called\n", __func__);
-
-       /* Enable muxes, etc. for SDMMC controllers */
-       pin_mux_mmc();
-
-       debug("%s: init MMC\n", __func__);
-       tegra_mmc_init();
-
-       return 0;
-}
-
-void pad_init_mmc(struct mmc_host *host)
-{
-#if defined(CONFIG_TEGRA30)
-       enum periph_id id = host->mmc_id;
-       u32 val;
-
-       debug("%s: sdmmc address = %08x, id = %d\n", __func__,
-               (unsigned int)host->reg, id);
-
-       /* Set the pad drive strength for SDMMC1 or 3 only */
-       if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
-               debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
-                       __func__);
-               return;
-       }
-
-       val = readl(&host->reg->sdmemcmppadctl);
-       val &= 0xFFFFFFF0;
-       val |= MEMCOMP_PADCTRL_VREF;
-       writel(val, &host->reg->sdmemcmppadctl);
-
-       val = readl(&host->reg->autocalcfg);
-       val &= 0xFFFF0000;
-       val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
-       writel(val, &host->reg->autocalcfg);
-#endif /* T30 */
-}
-#endif /* MMC */
-
 /*
  * In some SW environments, a memory carve-out exists to house a secure
  * monitor, a trusted OS, and/or various statically allocated media buffers.
@@ -362,7 +308,7 @@ static ulong usable_ram_size_below_4g(void)
  * start address of that bank cannot be represented in the 32-bit .size
  * field.
  */
-void dram_init_banksize(void)
+int dram_init_banksize(void)
 {
        gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
        gd->bd->bi_dram[0].size = usable_ram_size_below_4g();
@@ -381,6 +327,8 @@ void dram_init_banksize(void)
                gd->bd->bi_dram[1].start = 0;
                gd->bd->bi_dram[1].size = 0;
        }
+
+       return 0;
 }
 
 /*