mmc: do not overwrite cfg->f_max if "max-frequency" if missing

[u-boot] / arch / arm / mach-uniphier / Kconfig

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 660f83c8557c7dfc1f35b19272c056658a8b1a2a..cc759b3e01dc0cc41bddcd19f7bc063caa9aeb3d 100644 (file)
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -3,53 +3,87 @@ if ARCH_UNIPHIER
 config SYS_CONFIG_NAME
        default "uniphier"
 
+config ARCH_UNIPHIER_32BIT
+       bool
+       select CPU_V7
+       select CPU_V7_HAS_NONSEC
+       select ARMV7_NONSEC
+       select ARCH_SUPPORT_PSCI
+
 choice
         prompt "UniPhier SoC select"
-        default ARCH_UNIPHIER_PH1_PRO4
-
-config ARCH_UNIPHIER_PH1_SLD3
-       bool "UniPhier PH1-sLD3 SoC"
-       select CPU_V7
+        default ARCH_UNIPHIER_V7_MULTI
 
 config ARCH_UNIPHIER_LD4_SLD8
-       bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
-       select CPU_V7
+       bool "UniPhier LD4/sLD8 SoCs"
+       select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_PH1_PRO4
-       bool "UniPhier PH1-Pro4 SoC"
-       select CPU_V7
+config ARCH_UNIPHIER_V7_MULTI
+       bool "UniPhier Pro4/Pro5/PXs2/LD6b SoCs"
+       select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_PRO5_PXS2_LD6B
-       bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
-       select CPU_V7
+config ARCH_UNIPHIER_V8_MULTI
+       bool "UniPhier V8 SoCs"
+       depends on !SPL
+       select ARM64
+       select CMD_UNZIP
 
 endchoice
 
-config ARCH_UNIPHIER_PH1_LD4
-       bool "Enable UniPhier PH1-LD4 SoC support"
+config ARCH_UNIPHIER_LD4
+       bool "Enable UniPhier LD4 SoC support"
        depends on ARCH_UNIPHIER_LD4_SLD8
        default y
 
-config ARCH_UNIPHIER_PH1_SLD8
-       bool "Enable UniPhier PH1-sLD8 SoC support"
+config ARCH_UNIPHIER_SLD8
+       bool "Enable UniPhier sLD8 SoC support"
        depends on ARCH_UNIPHIER_LD4_SLD8
        default y
 
-config ARCH_UNIPHIER_PH1_PRO5
-       bool "Enable UniPhier PH1-Pro5 SoC support"
-       depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+config ARCH_UNIPHIER_PRO4
+       bool "Enable UniPhier Pro4 SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
+       default y
+
+config ARCH_UNIPHIER_PRO5
+       bool "Enable UniPhier Pro5 SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
+       default y
+
+config ARCH_UNIPHIER_PXS2
+       bool "Enable UniPhier Pxs2 SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
+       default y
+
+config ARCH_UNIPHIER_LD6B
+       bool "Enable UniPhier LD6b SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
+       default y
+
+config ARCH_UNIPHIER_LD11
+       bool "Enable UniPhier LD11 SoC support"
+       depends on ARCH_UNIPHIER_V8_MULTI
        default y
 
-config ARCH_UNIPHIER_PROXSTREAM2
-       bool "Enable UniPhier ProXstream2 SoC support"
-       depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+config ARCH_UNIPHIER_LD20
+       bool "Enable UniPhier LD20 SoC support"
+       depends on ARCH_UNIPHIER_V8_MULTI
+       select OF_BOARD_SETUP
        default y
 
-config ARCH_UNIPHIER_PH1_LD6B
-       bool "Enable UniPhier PH1-LD6b SoC support"
-       depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+config ARCH_UNIPHIER_PXS3
+       bool "Enable UniPhier PXs3 SoC support"
+       depends on ARCH_UNIPHIER_V8_MULTI
        default y
 
+config CACHE_UNIPHIER
+       bool "Enable the UniPhier L2 cache controller"
+       depends on ARCH_UNIPHIER_32BIT
+       select SYS_CACHE_SHIFT_7
+       default y
+       help
+         This option allows to use the UniPhier System Cache as L2 cache.
+
 config MICRO_SUPPORT_CARD
        bool "Use Micro Support Card"
        help
@@ -68,17 +102,21 @@ config CMD_PINMON
 
 config CMD_DDRPHY_DUMP
        bool "Enable dump command of DDR PHY parameters"
-       depends on ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4 || \
-                  ARCH_UNIPHIER_PH1_SLD8
+       depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+               ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
+       default y
        help
          The command "ddrphy" shows the resulting parameters of DDR PHY
          training; it is useful for the evaluation of DDR PHY training.
 
 config CMD_DDRMPHY_DUMP
        bool "Enable dump command of DDR Multi PHY parameters"
-       depends on ARCH_UNIPHIER_PROXSTREAM2 || ARCH_UNIPHIER_PH1_LD6B
+       depends on ARCH_UNIPHIER_PXS2 || ARCH_UNIPHIER_LD6B
+       default y
        help
          The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
          training; it is useful for the evaluation of DDR Multi PHY training.
 
+config SYS_SOC
+       default "uniphier-v7" if ARCH_UNIPHIER_LD4_SLD8 || ARCH_UNIPHIER_V7_MULTI
 endif