]> git.sur5r.net Git - u-boot/blobdiff - arch/arm/mach-uniphier/Kconfig
mmc: do not overwrite cfg->f_max if "max-frequency" if missing
[u-boot] / arch / arm / mach-uniphier / Kconfig
index 7bee6c7a299099708080756a4450bc36a291e750..cc759b3e01dc0cc41bddcd19f7bc063caa9aeb3d 100644 (file)
@@ -10,67 +10,70 @@ config ARCH_UNIPHIER_32BIT
        select ARMV7_NONSEC
        select ARCH_SUPPORT_PSCI
 
-config ARCH_UNIPHIER_64BIT
-       bool
-       select ARM64
-       select SPL_SEPARATE_BSS
-       select ARMV8_MULTIENTRY
-       select ARMV8_SPIN_TABLE
-
 choice
         prompt "UniPhier SoC select"
-        default ARCH_UNIPHIER_PRO4
-
-config ARCH_UNIPHIER_SLD3
-       bool "UniPhier PH1-sLD3 SoC"
-       select ARCH_UNIPHIER_32BIT
+        default ARCH_UNIPHIER_V7_MULTI
 
 config ARCH_UNIPHIER_LD4_SLD8
-       bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
+       bool "UniPhier LD4/sLD8 SoCs"
        select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_PRO4
-       bool "UniPhier PH1-Pro4 SoC"
+config ARCH_UNIPHIER_V7_MULTI
+       bool "UniPhier Pro4/Pro5/PXs2/LD6b SoCs"
        select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_PRO5_PXS2_LD6B
-       bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
-       select ARCH_UNIPHIER_32BIT
-
-config ARCH_UNIPHIER_LD11
-       bool "UniPhier PH1-LD11 SoC"
-       select ARCH_UNIPHIER_64BIT
-
-config ARCH_UNIPHIER_LD20
-       bool "UniPhier PH1-LD20 SoC"
-       select ARCH_UNIPHIER_64BIT
-       select OF_BOARD_SETUP
+config ARCH_UNIPHIER_V8_MULTI
+       bool "UniPhier V8 SoCs"
+       depends on !SPL
+       select ARM64
+       select CMD_UNZIP
 
 endchoice
 
 config ARCH_UNIPHIER_LD4
-       bool "Enable UniPhier PH1-LD4 SoC support"
+       bool "Enable UniPhier LD4 SoC support"
        depends on ARCH_UNIPHIER_LD4_SLD8
        default y
 
 config ARCH_UNIPHIER_SLD8
-       bool "Enable UniPhier PH1-sLD8 SoC support"
+       bool "Enable UniPhier sLD8 SoC support"
        depends on ARCH_UNIPHIER_LD4_SLD8
        default y
 
+config ARCH_UNIPHIER_PRO4
+       bool "Enable UniPhier Pro4 SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
+       default y
+
 config ARCH_UNIPHIER_PRO5
-       bool "Enable UniPhier PH1-Pro5 SoC support"
-       depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+       bool "Enable UniPhier Pro5 SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
        default y
 
 config ARCH_UNIPHIER_PXS2
-       bool "Enable UniPhier ProXstream2 SoC support"
-       depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+       bool "Enable UniPhier Pxs2 SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
        default y
 
 config ARCH_UNIPHIER_LD6B
-       bool "Enable UniPhier PH1-LD6b SoC support"
-       depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+       bool "Enable UniPhier LD6b SoC support"
+       depends on ARCH_UNIPHIER_V7_MULTI
+       default y
+
+config ARCH_UNIPHIER_LD11
+       bool "Enable UniPhier LD11 SoC support"
+       depends on ARCH_UNIPHIER_V8_MULTI
+       default y
+
+config ARCH_UNIPHIER_LD20
+       bool "Enable UniPhier LD20 SoC support"
+       depends on ARCH_UNIPHIER_V8_MULTI
+       select OF_BOARD_SETUP
+       default y
+
+config ARCH_UNIPHIER_PXS3
+       bool "Enable UniPhier PXs3 SoC support"
+       depends on ARCH_UNIPHIER_V8_MULTI
        default y
 
 config CACHE_UNIPHIER
@@ -99,7 +102,8 @@ config CMD_PINMON
 
 config CMD_DDRPHY_DUMP
        bool "Enable dump command of DDR PHY parameters"
-       depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+       depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+               ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
        default y
        help
          The command "ddrphy" shows the resulting parameters of DDR PHY
@@ -113,4 +117,6 @@ config CMD_DDRMPHY_DUMP
          The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
          training; it is useful for the evaluation of DDR Multi PHY training.
 
+config SYS_SOC
+       default "uniphier-v7" if ARCH_UNIPHIER_LD4_SLD8 || ARCH_UNIPHIER_V7_MULTI
 endif