*/
#include <common.h>
+#include <mmc.h>
#include <spl.h>
#include "../sbc/sbc-regs.h"
#include "../soc-info.h"
#include "boot-device.h"
-u32 spl_boot_device(void)
+u32 spl_boot_device_raw(void)
{
if (boot_is_swapped())
return BOOT_DEVICE_NOR;
return BOOT_DEVICE_NONE;
}
}
+
+u32 spl_boot_device(void)
+{
+ u32 ret;
+
+ ret = spl_boot_device_raw();
+
+ return ret == BOOT_DEVICE_USB ? BOOT_DEVICE_NOR : ret;
+}
+
+u32 spl_boot_mode(void)
+{
+ struct mmc *mmc;
+
+ /*
+ * work around a bug in the Boot ROM of PH1-sLD3, LD4, Pro4, and sLD8:
+ *
+ * The boot ROM in these SoCs breaks the PARTITION_CONFIG [179] of
+ * Extended CSD register; when switching to the Boot Partition 1, the
+ * Boot ROM should issue the SWITCH command (CMD6) with Set Bits for
+ * the Access Bits, but in fact it uses Write Byte for the Access Bits.
+ * As a result, the BOOT_PARTITION_ENABLE field of the PARTITION_CONFIG
+ * is lost. This bug was fixed for PH1-Pro5 and later SoCs.
+ *
+ * Fixup mmc->part_config here because it is used to determine the
+ * partition which the U-Boot image is read from.
+ */
+ mmc = find_mmc_device(0);
+ mmc->part_config &= ~EXT_CSD_BOOT_PART_NUM(PART_ACCESS_MASK);
+ mmc->part_config |= EXT_CSD_BOOT_PARTITION_ENABLE;
+
+ return MMCSD_MODE_EMMCBOOT;
+}