malta: Use device model & tree for UART

[u-boot] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7f7e258a801eaa9e4bff89a23df60e7ae3a26793..53363e38fe4309fa751716ce1d25a12d6d0e3d58 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,8 +5,8 @@ config SYS_ARCH
        default "mips"
 
 config SYS_CPU
-       default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2
-       default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2
+       default "mips32" if CPU_MIPS32
+       default "mips64" if CPU_MIPS64
 
 choice
        prompt "Target select"
@@ -23,11 +23,18 @@ config TARGET_QEMU_MIPS
 
 config TARGET_MALTA
        bool "Support malta"
+       select DM
+       select DM_SERIAL
+       select DYNAMIC_IO_PORT_BASE
+       select OF_CONTROL
+       select OF_ISA_BUS
        select SUPPORTS_BIG_ENDIAN
        select SUPPORTS_LITTLE_ENDIAN
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
+       select SUPPORTS_CPU_MIPS32_R6
        select SWAP_IO_SPACE
+       select MIPS_L1_CACHE_SHIFT_6
 
 config TARGET_VCT
        bool "Support vct"
@@ -43,6 +50,7 @@ config TARGET_DBAU1X00
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
        select SYS_MIPS_CACHE_INIT_RAM_LOAD
+       select MIPS_TUNE_4KC
 
 config TARGET_PB1X00
        bool "Support pb1x00"
@@ -50,7 +58,17 @@ config TARGET_PB1X00
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
        select SYS_MIPS_CACHE_INIT_RAM_LOAD
+       select MIPS_TUNE_4KC
 
+config ARCH_ATH79
+       bool "Support QCA/Atheros ath79"
+       select OF_CONTROL
+       select DM
+
+config MACH_PIC32
+       bool "Support Microchip PIC32"
+       select OF_CONTROL
+       select DM
 
 endchoice
 
@@ -59,6 +77,8 @@ source "board/imgtec/malta/Kconfig"
 source "board/micronas/vct/Kconfig"
 source "board/pb1x00/Kconfig"
 source "board/qemu-mips/Kconfig"
+source "arch/mips/mach-ath79/Kconfig"
+source "arch/mips/mach-pic32/Kconfig"
 
 if MIPS
 
@@ -89,7 +109,7 @@ config CPU_MIPS32_R1
        depends on SUPPORTS_CPU_MIPS32_R1
        select 32BIT
        help
-         Choose this option to build an U-Boot for release 1 or later of the
+         Choose this option to build an U-Boot for release 1 through 5 of the
          MIPS32 architecture.
 
 config CPU_MIPS32_R2
@@ -97,7 +117,15 @@ config CPU_MIPS32_R2
        depends on SUPPORTS_CPU_MIPS32_R2
        select 32BIT
        help
-         Choose this option to build an U-Boot for release 2 or later of the
+         Choose this option to build an U-Boot for release 2 through 5 of the
+         MIPS32 architecture.
+
+config CPU_MIPS32_R6
+       bool "MIPS32 Release 6"
+       depends on SUPPORTS_CPU_MIPS32_R6
+       select 32BIT
+       help
+         Choose this option to build an U-Boot for release 6 or later of the
          MIPS32 architecture.
 
 config CPU_MIPS64_R1
@@ -105,7 +133,7 @@ config CPU_MIPS64_R1
        depends on SUPPORTS_CPU_MIPS64_R1
        select 64BIT
        help
-         Choose this option to build a kernel for release 1 or later of the
+         Choose this option to build a kernel for release 1 through 5 of the
          MIPS64 architecture.
 
 config CPU_MIPS64_R2
@@ -113,7 +141,15 @@ config CPU_MIPS64_R2
        depends on SUPPORTS_CPU_MIPS64_R2
        select 64BIT
        help
-         Choose this option to build a kernel for release 2 or later of the
+         Choose this option to build a kernel for release 2 through 5 of the
+         MIPS64 architecture.
+
+config CPU_MIPS64_R6
+       bool "MIPS64 Release 6"
+       depends on SUPPORTS_CPU_MIPS64_R6
+       select 64BIT
+       help
+         Choose this option to build a kernel for release 6 or later of the
          MIPS64 architecture.
 
 endchoice
@@ -136,7 +172,7 @@ config MIPS_BOOT_ENV_LEGACY
          Enable this option if you want U-Boot to hand over the Yamon-style
          environment to the kernel. Information like memory size, initrd
          address and size will be prepared as zero-terminated key/value list.
-         The address of the enviroment is stored in register $a2.
+         The address of the environment is stored in register $a2.
 
 config MIPS_BOOT_FDT
        bool "Hand over a flattened device tree to Linux kernel"
@@ -160,19 +196,37 @@ config SUPPORTS_CPU_MIPS32_R1
 config SUPPORTS_CPU_MIPS32_R2
        bool
 
+config SUPPORTS_CPU_MIPS32_R6
+       bool
+
 config SUPPORTS_CPU_MIPS64_R1
        bool
 
 config SUPPORTS_CPU_MIPS64_R2
        bool
 
+config SUPPORTS_CPU_MIPS64_R6
+       bool
+
 config CPU_MIPS32
        bool
-       default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+       default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
 
 config CPU_MIPS64
        bool
-       default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+       default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
+
+config MIPS_TUNE_4KC
+       bool
+
+config MIPS_TUNE_14KC
+       bool
+
+config MIPS_TUNE_24KC
+       bool
+
+config MIPS_TUNE_74KC
+       bool
 
 config 32BIT
        bool
@@ -186,6 +240,29 @@ config SWAP_IO_SPACE
 config SYS_MIPS_CACHE_INIT_RAM_LOAD
        bool
 
+config MIPS_L1_CACHE_SHIFT_4
+       bool
+
+config MIPS_L1_CACHE_SHIFT_5
+       bool
+
+config MIPS_L1_CACHE_SHIFT_6
+       bool
+
+config MIPS_L1_CACHE_SHIFT_7
+       bool
+
+config MIPS_L1_CACHE_SHIFT
+       int
+       default "7" if MIPS_L1_CACHE_SHIFT_7
+       default "6" if MIPS_L1_CACHE_SHIFT_6
+       default "5" if MIPS_L1_CACHE_SHIFT_5
+       default "4" if MIPS_L1_CACHE_SHIFT_4
+       default "5"
+
+config DYNAMIC_IO_PORT_BASE
+       bool
+
 endif
 
 endmenu