#include <asm/cache.h>
#include <asm/io.h>
#include <asm/mmu.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
#include <asm/fsl_law.h>
#include <asm/fsl_lbc.h>
#include <post.h>
#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
DECLARE_GLOBAL_DATA_PTR;
major = SVR_MAJ(svr);
minor = SVR_MIN(svr);
+#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
+ if (SVR_SOC_VER(svr) == SVR_T4080) {
+ ccsr_rcpm_t *rcpm =
+ (void __iomem *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
+
+ setbits_be32(&gur->devdisr2, FSL_CORENET_DEVDISR2_DTSEC1_6 ||
+ FSL_CORENET_DEVDISR2_DTSEC1_9);
+ setbits_be32(&gur->devdisr3, FSL_CORENET_DEVDISR3_PCIE3);
+ setbits_be32(&gur->devdisr5, FSL_CORENET_DEVDISR5_DDR3);
+
+ /* It needs SW to disable core4~7 as HW design sake on T4080 */
+ for (i = 4; i < 8; i++)
+ cpu_disable(i);
+
+ /* request core4~7 into PH20 state, prior to entering PCL10
+ * state, all cores in cluster should be placed in PH20 state.
+ */
+ setbits_be32(&rcpm->pcph20setr, 0xf0);
+
+ /* put the 2nd cluster into PCL10 state */
+ setbits_be32(&rcpm->clpcl10setr, 1 << 1);
+ }
+#endif
+
if (cpu_numcores() > 1) {
#ifndef CONFIG_MP
puts("Unicore software on multiprocessor system!!\n"
get_sys_info(&sysinfo);
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ if (sysinfo.diff_sysclk == 1)
+ puts("Single Source Clock Configuration\n");
+#endif
+
puts("Clock Configuration:");
for_each_cpu(i, core, nr_cores, mask) {
if (!(i & 3))
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
#endif
- puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
+ puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n");
#ifdef CONFIG_FSL_CORENET
/* Display the RCW, so that no one gets confused as to what RCW
#ifndef CONFIG_SYS_FSL_TBCLK_DIV
#define CONFIG_SYS_FSL_TBCLK_DIV 8
#endif
-unsigned long get_tbclk (void)
+__weak unsigned long get_tbclk (void)
{
unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
!defined(CONFIG_SYS_INIT_L2_ADDR)
phys_size_t initdram(int board_type)
{
-#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
+#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \
+ defined(CONFIG_QEMU_E500)
return fsl_ddr_sdram_size();
#else
return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
int i, j, k, m;
u8 *p_8;
u32 *p_32;
- ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+ struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
generic_spd_eeprom_t
spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
switch (i) {
case 0:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
#endif
default:
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
puts("\n");
- for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) {
+ for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
m = 0;
printf("%6d (0x%04x)", k * 4, k * 4);
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {