#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
+#include <asm/fsl_errata.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
#endif
#include "../../../../drivers/block/fsl_sata.h"
+#ifdef CONFIG_U_QE
+#include "../../../../drivers/qe/qe.h"
+#endif
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_QE
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
+{
+#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+ u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
+
+ /* Increase Disconnect Threshold by 50mV */
+ xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
+ INC_DCNT_THRESHOLD_50MV;
+ /* Enable programming of USB High speed Disconnect threshold */
+ xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
+ out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
+
+ xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
+ /* Increase Disconnect Threshold by 50mV */
+ xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
+ INC_DCNT_THRESHOLD_50MV;
+ /* Enable programming of USB High speed Disconnect threshold */
+ xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
+ out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
+#else
+
+ u32 temp = 0;
+ u32 status = in_be32(&usb_phy->status1);
+
+ u32 squelch_prog_rd_0_2 =
+ (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
+ & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
+
+ u32 squelch_prog_rd_3_5 =
+ (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
+ & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
+
+ setbits_be32(&usb_phy->config1,
+ CONFIG_SYS_FSL_USB_HS_DISCNCT_INC);
+ setbits_be32(&usb_phy->config2,
+ CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
+
+ temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
+ out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
+
+ temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
+ out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
+#endif
+}
+#endif
+
+
+#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
#endif
#ifdef CONFIG_SYS_FSL_CPC
-static void enable_cpc(void)
+#if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
+static void disable_cpc_sram(void)
{
int i;
- u32 size = 0;
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
- u32 cpccfg0 = in_be32(&cpc->cpccfg0);
- size += CPC_CFG0_SZ_K(cpccfg0);
-#ifdef CONFIG_RAMBOOT_PBL
if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
/* find and disable LAW of SRAM */
struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
out_be32(&cpc->cpccsr0, 0);
out_be32(&cpc->cpcsrcr0, 0);
}
+ }
+}
#endif
+static void enable_cpc(void)
+{
+ int i;
+ u32 size = 0;
+
+ cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
+
+ for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+ u32 cpccfg0 = in_be32(&cpc->cpccfg0);
+ size += CPC_CFG0_SZ_K(cpccfg0);
+
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
+ if (has_erratum_a006379()) {
+ setbits_be32(&cpc->cpchdbcr0,
+ CPC_HDBCR0_SPLRU_LEVEL_EN);
+ }
+#endif
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
/* Read back to sync write */
law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
if (law.index != -1)
disable_law(law.index);
+
+#if defined(CONFIG_SYS_CPC_REINIT_F)
+ disable_cpc_sram();
+#endif
#endif
#ifdef CONFIG_CPM2
#if defined(CONFIG_CPM2)
m8560_cpm_reset();
#endif
-#ifdef CONFIG_QE
+
+#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
/* Config QE ioports */
config_qe_ioports();
#endif
+
#if defined(CONFIG_FSL_DMA)
dma_init();
#endif
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
-#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
int enable_cluster_l2(void)
{
int i = 0;
#endif
#ifdef CONFIG_L2_CACHE
ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
-#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
extern int spin_table_compat;
const char *spin;
#endif
-
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+ ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
}
skip_l2:
-#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
if (l2cache->l2csr0 & L2CSR0_L2E)
print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
" enabled\n");
puts("disabled\n");
#endif
+#if defined(CONFIG_RAMBOOT_PBL)
+ disable_cpc_sram();
+#endif
enable_cpc();
#ifndef CONFIG_SYS_FSL_NO_SERDES
fsl_serdes_init();
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+#define MCFGR_AXIPIPE 0x000000f0
+ if (IS_SVR_REV(svr, 1, 0))
+ clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE);
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
if (IS_SVR_REV(svr, 1, 0)) {
int i;
{
struct ccsr_usb_phy __iomem *usb_phy1 =
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy1);
+#endif
out_be32(&usb_phy1->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
{
struct ccsr_usb_phy __iomem *usb_phy2 =
(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy2);
+#endif
out_be32(&usb_phy2->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
setbits_be32(&usb_phy->port2.pwrfltcfg,
CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy);
#endif
+#endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
+
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
return 0;
}
-extern void setup_ivors(void);
-
void arch_preboot_os(void)
{
u32 msr;
msr = mfmsr();
msr &= ~(MSR_ME|MSR_CE);
mtmsr(msr);
-
- setup_ivors();
}
#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
void cpu_secondary_init_r(void)
{
-#ifdef CONFIG_QE
+#ifdef CONFIG_U_QE
+ uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
+#elif defined CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
+#endif
+
+#ifdef CONFIG_QE
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
int ret;
size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
/* load QE firmware from NAND flash to DDR first */
ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
- &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);
+ &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
if (ret && ret == -EUCLEAN) {
printf ("NAND read for QE firmware at offset %x failed %d\n",