#include <asm/processor.h>
#include <ioports.h>
#include <sata.h>
+#include <fm_eth.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
+#include <linux/compiler.h>
#include "mp.h"
-#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
#include <nand.h>
#include <errno.h>
#endif
+#include "../../../../drivers/block/fsl_sata.h"
+
DECLARE_GLOBAL_DATA_PTR;
extern void srio_init(void);
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
u32 cpccfg0 = in_be32(&cpc->cpccfg0);
size += CPC_CFG0_SZ_K(cpccfg0);
+#ifdef CONFIG_RAMBOOT_PBL
+ if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
+ /* find and disable LAW of SRAM */
+ struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
+
+ if (law.index == -1) {
+ printf("\nFatal error happened\n");
+ return;
+ }
+ disable_law(law.index);
+
+ clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
+ out_be32(&cpc->cpccsr0, 0);
+ out_be32(&cpc->cpcsrcr0, 0);
+ }
+#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+ /* skip CPC when it used as all SRAM */
+ if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
+ continue;
/* Flash invalidate the CPC and clear all the locks */
out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
void cpu_init_f (void)
{
extern void m8560_cpm_reset (void);
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+#if defined(CONFIG_SECURE_BOOT)
+ struct law_entry law;
+#endif
#ifdef CONFIG_MPC8548
ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
uint svr = get_svr();
disable_tlb(14);
disable_tlb(15);
+#if defined(CONFIG_SECURE_BOOT)
+ /* Disable the LAW created for NOR flash by the PBI commands */
+ law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
+ if (law.index != -1)
+ disable_law(law.index);
+#endif
+
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
#endif
/* Invalidate the CPC before DDR gets enabled */
invalidate_cpc();
+
+ #ifdef CONFIG_SYS_DCSRBAR_PHYS
+ /* set DCSRCR so that DCSR space is 1G */
+ setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
+ in_be32(&gur->dcsrcr);
+#endif
+
}
/* Implement a dummy function for those platforms w/o SERDES */
*/
int cpu_init_r(void)
{
+ __maybe_unused u32 svr = get_svr();
#ifdef CONFIG_SYS_LBC_LCRR
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
#endif
#if defined(CONFIG_L2_CACHE)
volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
- uint svr, ver;
- uint l2srbar;
+ uint ver;
u32 l2siz_field;
- svr = get_svr();
ver = SVR_SOC_VER(svr);
asm("msync;isync");
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
puts("already enabled");
- l2srbar = l2cache->l2srbar0;
#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
+ u32 l2srbar = l2cache->l2srbar0;
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
puts("enabled\n");
}
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+ if ((SVR_SOC_VER(svr) == SVR_P2040) ||
+ (SVR_SOC_VER(svr) == SVR_P2040_E)) {
+ puts("N/A\n");
+ goto skip_l2;
+ }
+
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
/* invalidate the L2 cache */
;
printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
}
+
+skip_l2:
#else
puts("disabled\n");
#endif
clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
__raw_readl(&lbc->lcrr);
isync();
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
+ udelay(100);
+#endif
#endif
+#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
+ {
+ ccsr_usb_phy_t *usb_phy1 =
+ (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+ out_be32(&usb_phy1->usb_enable_override,
+ CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
+ }
+#endif
+#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
+ {
+ ccsr_usb_phy_t *usb_phy2 =
+ (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
+ out_be32(&usb_phy2->usb_enable_override,
+ CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
+ }
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+ fman_enet_init();
+#endif
+
+#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
+ /*
+ * For P1022/1013 Rev1.0 silicon, after power on SATA host
+ * controller is configured in legacy mode instead of the
+ * expected enterprise mode. Software needs to clear bit[28]
+ * of HControl register to change to enterprise mode from
+ * legacy mode. We assume that the controller is offline.
+ */
+ if (IS_SVR_REV(svr, 1, 0) &&
+ ((SVR_SOC_VER(svr) == SVR_P1022) ||
+ (SVR_SOC_VER(svr) == SVR_P1022_E) ||
+ (SVR_SOC_VER(svr) == SVR_P1013) ||
+ (SVR_SOC_VER(svr) == SVR_P1013_E))) {
+ fsl_sata_reg_t *reg;
+
+ /* first SATA controller */
+ reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
+ clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
+
+ /* second SATA controller */
+ reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
+ clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN);
+ }
+#endif
+
+
return 0;
}
{
#ifdef CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
-#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
int ret;
- size_t fw_length = CONFIG_SYS_QE_FW_LENGTH;
+ size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
/* load QE firmware from NAND flash to DDR first */
- ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND,
- &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
+ ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
+ &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);
if (ret && ret == -EUCLEAN) {
printf ("NAND read for QE firmware at offset %x failed %d\n",
- CONFIG_SYS_QE_FW_IN_NAND, ret);
+ CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
}
#endif
qe_init(qe_base);