/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2003 Motorola Inc.
* Modified by Xianghua Xiao, X.Xiao@motorola.com
#include <watchdog.h>
#include <asm/processor.h>
#include <ioports.h>
+#include <sata.h>
#include <asm/io.h>
+#include <asm/cache.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_MPC8536
-extern void fsl_serdes_init(void);
-#endif
+extern void srio_init(void);
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
}
#endif
+#ifdef CONFIG_SYS_FSL_CPC
+static void enable_cpc(void)
+{
+ int i;
+ u32 size = 0;
+
+ cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
+
+ for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+ u32 cpccfg0 = in_be32(&cpc->cpccfg0);
+ size += CPC_CFG0_SZ_K(cpccfg0);
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
+ setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
+ setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
+#endif
+
+ out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
+ /* Read back to sync write */
+ in_be32(&cpc->cpccsr0);
+
+ }
+
+ printf("Corenet Platform Cache: %d KB enabled\n", size);
+}
+
+void invalidate_cpc(void)
+{
+ int i;
+ cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
+
+ for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+ /* Flash invalidate the CPC and clear all the locks */
+ out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
+ while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
+ ;
+ }
+}
+#else
+#define enable_cpc()
+#define invalidate_cpc()
+#endif /* CONFIG_SYS_FSL_CPC */
+
/*
* Breathe some life into the CPU...
*
volatile ccsr_rcpm_t *rcpm =
(void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
volatile ccsr_pic_t *pic =
- (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+ (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
u32 whoami = in_be32(&pic->whoami);
/* Enable the timebase register for this core */
void cpu_init_f (void)
{
- volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
extern void m8560_cpm_reset (void);
#ifdef CONFIG_MPC8548
ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
#endif
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- /* if cs1 is already set via debugger, leave cs0/cs1 alone */
- if (! memctl->br1 & 1) {
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
- memctl->br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
- }
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
+ init_early_memctl_regs();
#if defined(CONFIG_CPM2)
m8560_cpm_reset();
/* Config QE ioports */
config_qe_ioports();
#endif
-#if defined(CONFIG_MPC8536)
- fsl_serdes_init();
-#endif
#if defined(CONFIG_FSL_DMA)
dma_init();
#endif
corenet_tb_init();
#endif
init_used_tlb_cams();
+
+ /* Invalidate the CPC before DDR gets enabled */
+ invalidate_cpc();
}
+/* Implement a dummy function for those platforms w/o SERDES */
+static void __fsl_serdes__init(void)
+{
+ return ;
+}
+__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
/*
* Initialize L2 as cache.
* use the same bit-encoding as the older 8555, etc, parts.
*
*/
-
int cpu_init_r(void)
{
+#ifdef CONFIG_SYS_LBC_LCRR
+ volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+#endif
+
+#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
+ flush_dcache();
+ mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
+ sync();
+#endif
+
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
puts("already enabled");
l2srbar = l2cache->l2srbar0;
-#ifdef CONFIG_SYS_INIT_L2_ADDR
+#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
#else
puts("disabled\n");
#endif
+
+ enable_cpc();
+
#ifdef CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
qe_init(qe_base);
qe_reset();
#endif
+ /* needs to be in ram since code uses global static vars */
+ fsl_serdes_init();
+
+#ifdef CONFIG_SYS_SRIO
+ srio_init();
+#endif
+
#if defined(CONFIG_MP)
setup_mp();
#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+ {
+ void *p;
+ p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+ setbits_be32(p, 1 << (31 - 14));
+ }
+#endif
+
+#ifdef CONFIG_SYS_LBC_LCRR
+ /*
+ * Modify the CLKDIV field of LCRR register to improve the writing
+ * speed for NOR flash.
+ */
+ clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
+ __raw_readl(&lbc->lcrr);
+ isync();
+#endif
+
return 0;
}
setup_ivors();
}
+
+#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
+int sata_initialize(void)
+{
+ if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
+ return __sata_initialize();
+
+ return 1;
+}
+#endif
projects / u-boot / blobdiff