* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
+ phys_addr_t spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
const char *enable_method;
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
if (reg) {
- u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
- val = cpu_to_fdt32(val);
+ u32 phys_cpu_id = thread_to_core(*reg);
+ u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
+ val = cpu_to_fdt64(val);
if (*reg == id) {
fdt_setprop_string(blob, off, "status",
"okay");
if ((u64)bootpg < memory_limit) {
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ printf("Failed to reserve memory for bootpg: %s\n",
+ fdt_strerror(off));
+ }
+
+#ifndef CONFIG_MPC8xxx_DISABLE_BPTR
+ /*
+ * Reserve the default boot page so OSes dont use it.
+ * The default boot page is always mapped to bootpg above using
+ * boot page translation.
+ */
+ if (0xfffff000ull < memory_limit) {
+ off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
+ if (off < 0) {
+ printf("Failed to reserve memory for 0xfffff000: %s\n",
+ fdt_strerror(off));
+ }
+ }
+#endif
+
+ /* Reserve spin table page */
+ if (spin_tbl_addr < memory_limit) {
+ off = fdt_add_mem_rsv(blob,
+ (spin_tbl_addr & ~0xffful), 4096);
+ if (off < 0)
+ printf("Failed to reserve memory for spin table: %s\n",
+ fdt_strerror(off));
}
}
#endif
break;
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
+ ver == SVR_8541 || ver == SVR_8555)
return 128;
else
return 256;
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
+ ver == SVR_8541 || ver == SVR_8555)
return 256;
else
return 512;
/* we dont bother w/L3 since no platform of this type has one */
}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+ defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
static inline void ft_fixup_l2cache(void *blob)
{
int off, l2_off, l3_off = -1;
u32 *ph;
+#ifdef CONFIG_BACKSIDE_L2_CACHE
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+ struct ccsr_cluster_l2 *l2cache =
+ (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+ u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
u32 size, line_size, num_ways, num_sets;
int has_l2 = 1;
/* P2040/P2040E has no L2, so dont set any L2 props */
- if ((SVR_SOC_VER(get_svr()) == SVR_P2040) ||
- (SVR_SOC_VER(get_svr()) == SVR_P2040_E))
+ if (SVR_SOC_VER(get_svr()) == SVR_P2040)
has_l2 = 0;
size = (l2cfg0 & 0x3fff) * 64 * 1024;
if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if (reg)
+#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
+ /* Only initialize every eighth thread */
+ if (reg && !((*reg) % 8)) {
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
- (*reg * 2) + 32 + 1);
+ (*reg / 4) + 32 + 1);
+ }
+#else
+ if (reg) {
+ fdt_setprop_cell(blob, l2_off, "cache-stash-id",
+ (*reg * 2) + 32 + 1);
+ }
+#endif
#endif
fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
get_sys_info(&sysinfo);
#ifdef CONFIG_SYS_DPAA_FMAN
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
- sysinfo.freqFMan[0]);
+ sysinfo.freq_fman[0]);
#if (CONFIG_SYS_NUM_FMAN == 2)
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
- sysinfo.freqFMan[1]);
+ sysinfo.freq_fman[1]);
+#endif
#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ do_fixup_by_compat_u32(blob, "fsl,qman",
+ "clock-frequency", sysinfo.freq_qman, 1);
#endif
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
- "clock-frequency", sysinfo.freqPME, 1);
+ "clock-frequency", sysinfo.freq_pme, 1);
#endif
}
#else
unsigned int svr;
svr = mfspr(SPRN_SVR);
- if (SVR_SOC_VER(svr) == SVR_8569_E) {
+ if (SVR_SOC_VER(svr) == SVR_8569) {
if(IS_SVR_REV(svr, 1, 0))
do_fixup_by_compat_u32(blob, "fsl,qe",
"fsl,qe-num-snums", 46, 1);
if (!p)
return;
- fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0);
+ fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16);
if (!fmanfw)
return;
return;
}
- if (length > CONFIG_SYS_FMAN_FW_LENGTH) {
+ if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) {
printf("Fman firmware at %p is too large (size=%u)\n",
fmanfw, length);
return;
fdt_strerror(rc));
return;
}
- phandle = fdt_alloc_phandle(blob);
- rc = fdt_setprop_cell(blob, fwnode, "linux,phandle", phandle);
- if (rc < 0) {
+ phandle = fdt_create_phandle(blob, fwnode);
+ if (!phandle) {
char s[64];
fdt_get_path(blob, fwnode, s, sizeof(s));
printf("Could not add phandle property to node %s: %s\n", s,
#define fdt_fixup_fman_firmware(x)
#endif
+#if defined(CONFIG_PPC_P4080)
+static void fdt_fixup_usb(void *fdt)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+ int off;
+
+ off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
+ if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
+ FSL_CORENET_RCWSR11_EC1_FM1_USB1)
+ fdt_status_disabled(fdt, off);
+
+ off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
+ if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
+ FSL_CORENET_RCWSR11_EC2_USB2)
+ fdt_status_disabled(fdt, off);
+}
+#else
+#define fdt_fixup_usb(x)
+#endif
+
+#if defined(CONFIG_PPC_T1040)
+static void fdt_fixup_l2_switch(void *blob)
+{
+ uchar l2swaddr[6];
+ int node;
+
+ /* The l2switch node from device-tree has
+ * compatible string "vitesse-9953" */
+ node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
+ if (node == -FDT_ERR_NOTFOUND)
+ /* no l2switch node has been found */
+ return;
+
+ /* Get MAC address for the l2switch from "l2switchaddr"*/
+ if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) {
+ printf("Warning: MAC address for l2switch not found\n");
+ memset(l2swaddr, 0, sizeof(l2swaddr));
+ }
+
+ /* Add MAC address to l2switch node */
+ fdt_setprop(blob, node, "local-mac-address", l2swaddr,
+ sizeof(l2swaddr));
+}
+#else
+#define fdt_fixup_l2_switch(x)
+#endif
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
int off;
int val;
+ int len;
sys_info_t sysinfo;
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(get_svr()))
fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+ else {
+ ccsr_sec_t __iomem *sec;
+
+ sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+ fdt_fixup_crypto_node(blob, in_be32(&sec->secvid_ms));
+ }
+#endif
fdt_fixup_ethernet(blob);
fdt_add_enet_stashing(blob);
+#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
+#define CONFIG_FSL_TBCLK_EXTRA_DIV 1
+#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
+ "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
+ 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
get_sys_info(&sysinfo);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
+ val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
fdt_setprop(blob, off, "clock-frequency", &val, 4);
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
"cpu", 4);
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
ft_fixup_qe_snum(blob);
#ifdef CONFIG_FSL_CORENET
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+ do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+ do_fixup_by_compat_u32(blob, "fsl,mpic",
+ "clock-frequency", get_bus_freq(0)/2, 1);
+#else
+ do_fixup_by_compat_u32(blob, "fsl,mpic",
+ "clock-frequency", get_bus_freq(0), 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
"timer-frequency", gd->bus_clk/2, 1);
+ /*
+ * clock-freq should change to clock-frequency and
+ * flexcan-v1.0 should change to p1010-flexcan respectively
+ * in the future.
+ */
do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
- "clock_freq", gd->bus_clk, 1);
+ "clock_freq", gd->bus_clk/2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock-frequency", gd->bus_clk/2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
+ "clock-frequency", gd->bus_clk/2, 1);
+
+ fdt_fixup_usb(blob);
+
+ fdt_fixup_l2_switch(blob);
}
/*
#define CCSR_VIRT_TO_PHYS(x) \
(CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
+static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
+{
+ printf("Warning: U-Boot configured %s at address %llx,\n"
+ "but the device tree has it at %llx\n", name, uaddr, daddr);
+}
+
/*
* Verify the device tree
*
*/
int ft_verify_fdt(void *fdt)
{
- uint64_t ccsr = 0;
+ uint64_t addr = 0;
int aliases;
int off;
/* First check the CCSR base address */
off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
if (off > 0)
- ccsr = fdt_get_base_address(fdt, off);
+ addr = fdt_get_base_address(fdt, off);
- if (!ccsr) {
+ if (!addr) {
printf("Warning: could not determine base CCSR address in "
"device tree\n");
/* No point in checking anything else */
return 0;
}
- if (ccsr != CONFIG_SYS_CCSRBAR_PHYS) {
- printf("Warning: U-Boot configured CCSR at address %llx,\n"
- "but the device tree has it at %llx\n",
- (uint64_t) CONFIG_SYS_CCSRBAR_PHYS, ccsr);
+ if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
+ msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
/* No point in checking anything else */
return 0;
}
/*
- * Get the 'aliases' node. If there isn't one, then there's nothing
- * left to do.
+ * Check some nodes via aliases. We assume that U-Boot and the device
+ * tree enumerate the devices equally. E.g. the first serial port in
+ * U-Boot is the same as "serial0" in the device tree.
*/
aliases = fdt_path_offset(fdt, "/aliases");
if (aliases > 0) {
#endif
}
+ /*
+ * The localbus node is typically a root node, even though the lbc
+ * controller is part of CCSR. If we were to put the lbc node under
+ * the SOC node, then the 'ranges' property in the lbc node would
+ * translate through the 'ranges' property of the parent SOC node, and
+ * we don't want that. Since it's a separate node, it's possible for
+ * the 'reg' property to be wrong, so check it here. For now, we
+ * only check for "fsl,elbc" nodes.
+ */
+#ifdef CONFIG_SYS_LBC_ADDR
+ off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
+ if (off > 0) {
+ const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL);
+ if (reg) {
+ uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
+
+ addr = fdt_translate_address(fdt, off, reg);
+ if (uaddr != addr) {
+ msg("the localbus", uaddr, addr);
+ return 0;
+ }
+ }
+ }
+#endif
+
return 1;
}