/*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/ctype.h>
#include <asm/io.h>
#include <asm/fsl_portals.h>
+#include <hwconfig.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
+#include "../../../../drivers/qe/qe.h" /* For struct qe_firmware */
DECLARE_GLOBAL_DATA_PTR;
extern void ft_qe_setup(void *blob);
extern void ft_fixup_num_cores(void *blob);
+extern void ft_srio_setup(void *blob);
#ifdef CONFIG_MP
#include "mp.h"
void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
+ phys_addr_t spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
+ const char *enable_method;
+#if defined(T1040_TDM_QUIRK_CCSR_BASE)
+ int ret;
+ int tdm_hwconfig_enabled = 0;
+ char buffer[HWCONFIG_BUFFER_SIZE] = {0};
+#endif
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
if (reg) {
- u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
- val = cpu_to_fdt32(val);
+ u32 phys_cpu_id = thread_to_core(*reg);
+ u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
+ val = cpu_to_fdt64(val);
if (*reg == id) {
fdt_setprop_string(blob, off, "status",
"okay");
fdt_setprop_string(blob, off, "status",
"disabled");
}
+
+ if (hold_cores_in_reset(0)) {
+#ifdef CONFIG_FSL_CORENET
+ /* Cores held in reset, use BRR to release */
+ enable_method = "fsl,brr-holdoff";
+#else
+ /* Cores held in reset, use EEBPCR to release */
+ enable_method = "fsl,eebpcr-holdoff";
+#endif
+ } else {
+ /* Cores out of reset and in a spin-loop */
+ enable_method = "spin-table";
+
+ fdt_setprop(blob, off, "cpu-release-addr",
+ &val, sizeof(val));
+ }
+
fdt_setprop_string(blob, off, "enable-method",
- "spin-table");
- fdt_setprop(blob, off, "cpu-release-addr",
- &val, sizeof(val));
+ enable_method);
} else {
printf ("cpu NULL\n");
}
"device_type", "cpu", 4);
}
+#if defined(T1040_TDM_QUIRK_CCSR_BASE)
+#define CONFIG_MEM_HOLE_16M 0x1000000
+ /*
+ * Extract hwconfig from environment.
+ * Search for tdm entry in hwconfig.
+ */
+ ret = getenv_f("hwconfig", buffer, sizeof(buffer));
+ if (ret > 0)
+ tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
+
+ /* Reserve the memory hole created by TDM LAW, so OSes dont use it */
+ if (tdm_hwconfig_enabled) {
+ off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE,
+ CONFIG_MEM_HOLE_16M);
+ if (off < 0)
+ printf("Failed to reserve memory for tdm: %s\n",
+ fdt_strerror(off));
+ }
+#endif
+
/* Reserve the boot page so OSes dont use it */
if ((u64)bootpg < memory_limit) {
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ printf("Failed to reserve memory for bootpg: %s\n",
+ fdt_strerror(off));
}
+
+#ifndef CONFIG_MPC8xxx_DISABLE_BPTR
+ /*
+ * Reserve the default boot page so OSes dont use it.
+ * The default boot page is always mapped to bootpg above using
+ * boot page translation.
+ */
+ if (0xfffff000ull < memory_limit) {
+ off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
+ if (off < 0) {
+ printf("Failed to reserve memory for 0xfffff000: %s\n",
+ fdt_strerror(off));
+ }
+ }
+#endif
+
+ /* Reserve spin table page */
+ if (spin_tbl_addr < memory_limit) {
+ off = fdt_add_mem_rsv(blob,
+ (spin_tbl_addr & ~0xffful), 4096);
+ if (off < 0)
+ printf("Failed to reserve memory for spin table: %s\n",
+ fdt_strerror(off));
+ }
+#ifdef CONFIG_DEEP_SLEEP
+#ifdef CONFIG_SPL_MMC_BOOT
+ off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START,
+ CONFIG_SYS_MMC_U_BOOT_SIZE);
+ if (off < 0)
+ printf("Failed to reserve memory for SD deep sleep: %s\n",
+ fdt_strerror(off));
+#elif defined(CONFIG_SPL_SPI_BOOT)
+ off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START,
+ CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE);
+ if (off < 0)
+ printf("Failed to reserve memory for SPI deep sleep: %s\n",
+ fdt_strerror(off));
+#endif
+#endif
}
#endif
break;
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
+ ver == SVR_8541 || ver == SVR_8555)
return 128;
else
return 256;
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
+ ver == SVR_8541 || ver == SVR_8555)
return 256;
else
return 512;
int len, off;
u32 *ph;
struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
- char compat_buf[38];
const u32 line_size = 32;
const u32 num_ways = 8;
}
if (cpu) {
- if (isdigit(cpu->name[0]))
- len = sprintf(compat_buf,
- "fsl,mpc%s-l2-cache-controller", cpu->name);
- else
- len = sprintf(compat_buf,
- "fsl,%c%s-l2-cache-controller",
- tolower(cpu->name[0]), cpu->name + 1);
+ char buf[40];
- sprintf(&compat_buf[len + 1], "cache");
+ if (isdigit(cpu->name[0])) {
+ /* MPCxxxx, where xxxx == 4-digit number */
+ len = sprintf(buf, "fsl,mpc%s-l2-cache-controller",
+ cpu->name) + 1;
+ } else {
+ /* Pxxxx or Txxxx, where xxxx == 4-digit number */
+ len = sprintf(buf, "fsl,%c%s-l2-cache-controller",
+ tolower(cpu->name[0]), cpu->name + 1) + 1;
+ }
+
+ /*
+ * append "cache" after the NULL character that the previous
+ * sprintf wrote. This is how a device tree stores multiple
+ * strings in a property.
+ */
+ len += sprintf(buf + len, "cache") + 1;
+
+ fdt_setprop(blob, off, "compatible", buf, len);
}
fdt_setprop(blob, off, "cache-unified", NULL, 0);
fdt_setprop_cell(blob, off, "cache-block-size", line_size);
fdt_setprop_cell(blob, off, "cache-size", size);
fdt_setprop_cell(blob, off, "cache-sets", num_sets);
fdt_setprop_cell(blob, off, "cache-level", 2);
- fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
/* we dont bother w/L3 since no platform of this type has one */
}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+ defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
static inline void ft_fixup_l2cache(void *blob)
{
int off, l2_off, l3_off = -1;
u32 *ph;
+#ifdef CONFIG_BACKSIDE_L2_CACHE
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+ struct ccsr_cluster_l2 *l2cache =
+ (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+ u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
u32 size, line_size, num_ways, num_sets;
+ int has_l2 = 1;
+
+ /* P2040/P2040E has no L2, so dont set any L2 props */
+ if (SVR_SOC_VER(get_svr()) == SVR_P2040)
+ has_l2 = 0;
size = (l2cfg0 & 0x3fff) * 64 * 1024;
num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
goto next;
}
+ if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
- {
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if (reg)
+#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
+ /* Only initialize every eighth thread */
+ if (reg && !((*reg) % 8)) {
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
- (*reg * 2) + 32 + 1);
- }
+ (*reg / 4) + 32 + 1);
+ }
+#else
+ if (reg) {
+ fdt_setprop_cell(blob, l2_off, "cache-stash-id",
+ (*reg * 2) + 32 + 1);
+ }
+#endif
#endif
- fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
- fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
- fdt_setprop_cell(blob, l2_off, "cache-size", size);
- fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
- fdt_setprop_cell(blob, l2_off, "cache-level", 2);
- fdt_setprop(blob, l2_off, "compatible", "cache", 6);
+ fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, l2_off, "cache-block-size",
+ line_size);
+ fdt_setprop_cell(blob, l2_off, "cache-size", size);
+ fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, l2_off, "cache-level", 2);
+ fdt_setprop(blob, l2_off, "compatible", "cache", 6);
+ }
if (l3_off < 0) {
ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
+ do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
+ do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
+ do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
}
#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
+#ifdef CONFIG_SYS_DPAA_FMAN
static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
unsigned long freq)
{
"for %s: %s\n", compat, fdt_strerror(off));
}
}
+#endif
static void ft_fixup_dpaa_clks(void *blob)
{
sys_info_t sysinfo;
get_sys_info(&sysinfo);
+#ifdef CONFIG_SYS_DPAA_FMAN
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
- sysinfo.freqFMan[0]);
+ sysinfo.freq_fman[0]);
#if (CONFIG_SYS_NUM_FMAN == 2)
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
- sysinfo.freqFMan[1]);
+ sysinfo.freq_fman[1]);
+#endif
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ do_fixup_by_compat_u32(blob, "fsl,qman",
+ "clock-frequency", sysinfo.freq_qman, 1);
#endif
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
- "clock-frequency", sysinfo.freqPME, 1);
+ "clock-frequency", sysinfo.freq_pme, 1);
#endif
}
#else
unsigned int svr;
svr = mfspr(SPRN_SVR);
- if (SVR_SOC_VER(svr) == SVR_8569_E) {
+ if (SVR_SOC_VER(svr) == SVR_8569) {
if(IS_SVR_REV(svr, 1, 0))
do_fixup_by_compat_u32(blob, "fsl,qe",
"fsl,qe-num-snums", 46, 1);
}
#endif
+/**
+ * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree
+ *
+ * The binding for an Fman firmware node is documented in
+ * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains
+ * the actual Fman firmware binary data. The operating system is expected to
+ * be able to parse the binary data to determine any attributes it needs.
+ */
+#ifdef CONFIG_SYS_DPAA_FMAN
+void fdt_fixup_fman_firmware(void *blob)
+{
+ int rc, fmnode, fwnode = -1;
+ uint32_t phandle;
+ struct qe_firmware *fmanfw;
+ const struct qe_header *hdr;
+ unsigned int length;
+ uint32_t crc;
+ const char *p;
+
+ /* The first Fman we find will contain the actual firmware. */
+ fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman");
+ if (fmnode < 0)
+ /* Exit silently if there are no Fman devices */
+ return;
+
+ /* If we already have a firmware node, then also exit silently. */
+ if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0)
+ return;
+
+ /* If the environment variable is not set, then exit silently */
+ p = getenv("fman_ucode");
+ if (!p)
+ return;
+
+ fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16);
+ if (!fmanfw)
+ return;
+
+ hdr = &fmanfw->header;
+ length = be32_to_cpu(hdr->length);
+
+ /* Verify the firmware. */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+ printf("Data at %p is not an Fman firmware\n", fmanfw);
+ return;
+ }
+
+ if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) {
+ printf("Fman firmware at %p is too large (size=%u)\n",
+ fmanfw, length);
+ return;
+ }
+
+ length -= sizeof(u32); /* Subtract the size of the CRC */
+ crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length));
+ if (crc != crc32_no_comp(0, (void *)fmanfw, length)) {
+ printf("Fman firmware at %p has invalid CRC\n", fmanfw);
+ return;
+ }
+
+ /* Increase the size of the fdt to make room for the node. */
+ rc = fdt_increase_size(blob, fmanfw->header.length);
+ if (rc < 0) {
+ printf("Unable to make room for Fman firmware: %s\n",
+ fdt_strerror(rc));
+ return;
+ }
+
+ /* Create the firmware node. */
+ fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware");
+ if (fwnode < 0) {
+ char s[64];
+ fdt_get_path(blob, fmnode, s, sizeof(s));
+ printf("Could not add firmware node to %s: %s\n", s,
+ fdt_strerror(fwnode));
+ return;
+ }
+ rc = fdt_setprop_string(blob, fwnode, "compatible", "fsl,fman-firmware");
+ if (rc < 0) {
+ char s[64];
+ fdt_get_path(blob, fwnode, s, sizeof(s));
+ printf("Could not add compatible property to node %s: %s\n", s,
+ fdt_strerror(rc));
+ return;
+ }
+ phandle = fdt_create_phandle(blob, fwnode);
+ if (!phandle) {
+ char s[64];
+ fdt_get_path(blob, fwnode, s, sizeof(s));
+ printf("Could not add phandle property to node %s: %s\n", s,
+ fdt_strerror(rc));
+ return;
+ }
+ rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, fmanfw->header.length);
+ if (rc < 0) {
+ char s[64];
+ fdt_get_path(blob, fwnode, s, sizeof(s));
+ printf("Could not add firmware property to node %s: %s\n", s,
+ fdt_strerror(rc));
+ return;
+ }
+
+ /* Find all other Fman nodes and point them to the firmware node. */
+ while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, "fsl,fman")) > 0) {
+ rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", phandle);
+ if (rc < 0) {
+ char s[64];
+ fdt_get_path(blob, fmnode, s, sizeof(s));
+ printf("Could not add pointer property to node %s: %s\n",
+ s, fdt_strerror(rc));
+ return;
+ }
+ }
+}
+#else
+#define fdt_fixup_fman_firmware(x)
+#endif
+
+#if defined(CONFIG_PPC_P4080)
+static void fdt_fixup_usb(void *fdt)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+ int off;
+
+ off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
+ if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
+ FSL_CORENET_RCWSR11_EC1_FM1_USB1)
+ fdt_status_disabled(fdt, off);
+
+ off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
+ if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
+ FSL_CORENET_RCWSR11_EC2_USB2)
+ fdt_status_disabled(fdt, off);
+}
+#else
+#define fdt_fixup_usb(x)
+#endif
+
+#if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T4240) || \
+ defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080)
+void fdt_fixup_dma3(void *blob)
+{
+ /* the 3rd DMA is not functional if SRIO2 is chosen */
+ int nodeoff;
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+#define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300)
+#if defined(CONFIG_PPC_T2080)
+ u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+ switch (srds_prtcl_s2) {
+ case 0x29:
+ case 0x2d:
+ case 0x2e:
+#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
+ defined(CONFIG_PPC_T4080)
+ u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+
+ switch (srds_prtcl_s4) {
+ case 6:
+ case 8:
+ case 14:
+ case 16:
+#endif
+ nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma",
+ CONFIG_SYS_ELO3_DMA3);
+ if (nodeoff > 0)
+ fdt_status_disabled(blob, nodeoff);
+ else
+ printf("WARNING: unable to disable dma3\n");
+ break;
+ default:
+ break;
+ }
+}
+#else
+#define fdt_fixup_dma3(x)
+#endif
+
+#if defined(CONFIG_PPC_T1040)
+static void fdt_fixup_l2_switch(void *blob)
+{
+ uchar l2swaddr[6];
+ int node;
+
+ /* The l2switch node from device-tree has
+ * compatible string "vitesse-9953" */
+ node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
+ if (node == -FDT_ERR_NOTFOUND)
+ /* no l2switch node has been found */
+ return;
+
+ /* Get MAC address for the l2switch from "l2switchaddr"*/
+ if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) {
+ printf("Warning: MAC address for l2switch not found\n");
+ memset(l2swaddr, 0, sizeof(l2swaddr));
+ }
+
+ /* Add MAC address to l2switch node */
+ fdt_setprop(blob, node, "local-mac-address", l2swaddr,
+ sizeof(l2swaddr));
+}
+#else
+#define fdt_fixup_l2_switch(x)
+#endif
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
int off;
int val;
+ int len;
sys_info_t sysinfo;
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(get_svr()))
fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+ else {
+ ccsr_sec_t __iomem *sec;
+
+ sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+ fdt_fixup_crypto_node(blob, in_be32(&sec->secvid_ms));
+ }
+#endif
fdt_fixup_ethernet(blob);
fdt_add_enet_stashing(blob);
+#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
+#define CONFIG_FSL_TBCLK_EXTRA_DIV 1
+#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
+ "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
+ 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
get_sys_info(&sysinfo);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
+ val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
fdt_setprop(blob, off, "clock-frequency", &val, 4);
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
"cpu", 4);
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
+ "bus-frequency", gd->arch.lbc_clk, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
ft_fixup_qe_snum(blob);
#endif
+ fdt_fixup_fman_firmware(blob);
+
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#ifdef CONFIG_CPM2
do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
- "current-speed", bd->bi_baudrate, 1);
+ "current-speed", gd->baudrate, 1);
do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
"clock-frequency", bd->bi_brgfreq, 1);
#ifdef CONFIG_FSL_CORENET
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+ do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+ do_fixup_by_compat_u32(blob, "fsl,mpic",
+ "clock-frequency", get_bus_freq(0)/2, 1);
+#else
+ do_fixup_by_compat_u32(blob, "fsl,mpic",
+ "clock-frequency", get_bus_freq(0), 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
fdt_portal(blob, "fsl,bman-portal", "bman-portals",
(u64)CONFIG_SYS_BMAN_MEM_PHYS,
CONFIG_SYS_BMAN_MEM_SIZE);
+ fdt_fixup_bportals(blob);
#endif
#if defined(CONFIG_SYS_QMAN_MEM_PHYS)
fdt_fixup_qportals(blob);
#endif
+
+#ifdef CONFIG_SYS_SRIO
+ ft_srio_setup(blob);
+#endif
+
+ /*
+ * system-clock = CCB clock/2
+ * Here gd->bus_clk = CCB clock
+ * We are using the system clock as 1588 Timer reference
+ * clock source select
+ */
+ do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
+ "timer-frequency", gd->bus_clk/2, 1);
+
+ /*
+ * clock-freq should change to clock-frequency and
+ * flexcan-v1.0 should change to p1010-flexcan respectively
+ * in the future.
+ */
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock_freq", gd->bus_clk/2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock-frequency", gd->bus_clk/2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
+ "clock-frequency", gd->bus_clk/2, 1);
+
+ fdt_fixup_usb(blob);
+
+ fdt_fixup_l2_switch(blob);
+
+ fdt_fixup_dma3(blob);
+}
+
+/*
+ * For some CCSR devices, we only have the virtual address, not the physical
+ * address. This is because we map CCSR as a whole, so we typically don't need
+ * a macro for the physical address of any device within CCSR. In this case,
+ * we calculate the physical address of that device using it's the difference
+ * between the virtual address of the device and the virtual address of the
+ * beginning of CCSR.
+ */
+#define CCSR_VIRT_TO_PHYS(x) \
+ (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
+
+static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
+{
+ printf("Warning: U-Boot configured %s at address %llx,\n"
+ "but the device tree has it at %llx\n", name, uaddr, daddr);
+}
+
+/*
+ * Verify the device tree
+ *
+ * This function compares several CONFIG_xxx macros that contain physical
+ * addresses with the corresponding nodes in the device tree, to see if
+ * the physical addresses are all correct. For example, if
+ * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address
+ * of the first UART. We convert this to a physical address and compare
+ * that with the physical address of the first ns16550-compatible node
+ * in the device tree. If they don't match, then we display a warning.
+ *
+ * Returns 1 on success, 0 on failure
+ */
+int ft_verify_fdt(void *fdt)
+{
+ uint64_t addr = 0;
+ int aliases;
+ int off;
+
+ /* First check the CCSR base address */
+ off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
+ if (off > 0)
+ addr = fdt_get_base_address(fdt, off);
+
+ if (!addr) {
+ printf("Warning: could not determine base CCSR address in "
+ "device tree\n");
+ /* No point in checking anything else */
+ return 0;
+ }
+
+ if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
+ msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
+ /* No point in checking anything else */
+ return 0;
+ }
+
+ /*
+ * Check some nodes via aliases. We assume that U-Boot and the device
+ * tree enumerate the devices equally. E.g. the first serial port in
+ * U-Boot is the same as "serial0" in the device tree.
+ */
+ aliases = fdt_path_offset(fdt, "/aliases");
+ if (aliases > 0) {
+#ifdef CONFIG_SYS_NS16550_COM1
+ if (!fdt_verify_alias_address(fdt, aliases, "serial0",
+ CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1)))
+ return 0;
+#endif
+
+#ifdef CONFIG_SYS_NS16550_COM2
+ if (!fdt_verify_alias_address(fdt, aliases, "serial1",
+ CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2)))
+ return 0;
+#endif
+ }
+
+ /*
+ * The localbus node is typically a root node, even though the lbc
+ * controller is part of CCSR. If we were to put the lbc node under
+ * the SOC node, then the 'ranges' property in the lbc node would
+ * translate through the 'ranges' property of the parent SOC node, and
+ * we don't want that. Since it's a separate node, it's possible for
+ * the 'reg' property to be wrong, so check it here. For now, we
+ * only check for "fsl,elbc" nodes.
+ */
+#ifdef CONFIG_SYS_LBC_ADDR
+ off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
+ if (off > 0) {
+ const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL);
+ if (reg) {
+ uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
+
+ addr = fdt_translate_address(fdt, off, reg);
+ if (uaddr != addr) {
+ msg("the localbus", uaddr, addr);
+ return 0;
+ }
+ }
+ }
+#endif
+
+ return 1;
}