"SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
} while (0)
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
static void update_rdcc(void)
{
u32 val;
}
}
}
-#endif
#if defined(CONFIG_440)
/*
#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-#if !defined(CONFIG_NAND_SPL)
/*-----------------------------------------------------------------------------+
* sdram_memsize
*-----------------------------------------------------------------------------*/
val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
printf(", CL%d)", val);
}
-#endif /* !CONFIG_NAND_SPL */
#if defined(CONFIG_SPD_EEPROM)
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE)
- t_wr_ns = max(t_wr_ns,
+ t_wr_ns = max(t_wr_ns, (unsigned long)
spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
}
else
sdram_ddr1 = false;
- t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
- t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
- t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
- t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
- t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
- t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
+ t_rcd_ns = max(t_rcd_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
+ t_rrd_ns = max(t_rrd_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
+ t_rp_ns = max(t_rp_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
+ t_ras_ns = max(t_ras_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 30));
+ t_rc_ns = max(t_rc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 41));
+ t_rfc_ns = max(t_rfc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 42));
}
}
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE) {
- t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
- t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
+ t_wpc_ns = max(t_wtr_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ t_wtr_ns = max(t_wtr_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
+ t_rpc_ns = max(t_rpc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
}
}
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE)
- ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
+ ecc = max(ecc,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11));
}
if (ecc == 0)
return;
*---------------------------------------------------------------------------*/
phys_size_t initdram(int board_type)
{
- /*
- * Only run this SDRAM init code once. For NAND booting
- * targets like Kilauea, we call initdram() early from the
- * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
- * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
- * which calls initdram() again. This time the controller
- * mustn't be reconfigured again since we're already running
- * from SDRAM.
- */
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
unsigned long val;
#if defined(CONFIG_440)
#endif
#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
/*------------------------------------------------------------------
| DQS calibration.
+-----------------------------------------------------------------*/
DQS_autocalibration();
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
/*
set_mcsr(get_mcsr());
#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-
return (CONFIG_SYS_MBYTES_SDRAM << 20);
}
#endif /* CONFIG_SPD_EEPROM */
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#if defined(CONFIG_440)
u32 mfdcr_any(u32 dcr)
{
}
}
#endif /* defined(CONFIG_440) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
inline void ppc4xx_ibm_ddr2_register_dump(void)
{