* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*------------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------
+ * SPDX-License-Identifier: GPL-2.0 IBM-pibs
*/
/*
#include <asm-offsets.h>
#include <config.h>
#include <asm/ppc4xx.h>
-#include <timestamp.h>
#include <version.h>
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/mmu.h>
#include <asm/ppc4xx-isram.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#ifdef CONFIG_SYS_INIT_DCACHE_CS
# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
# define PBxAP PB1AP
.extern ext_bus_cntlr_init
-#ifdef CONFIG_NAND_U_BOOT
- .extern reconfig_tlb0
-#endif
/*
* Set up GOT: Global Offset Table
*
* Use r12 to access the GOT
*/
-#if !defined(CONFIG_NAND_SPL)
+#if !defined(CONFIG_SPL_BUILD)
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(transfer_to_handler)
GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_end)
GOT_ENTRY(__bss_start)
END_GOT
-#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_SPL_BUILD */
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD)
/*
- * NAND U-Boot image is started from offset 0
+ * 4xx RAM-booting U-Boot image is started from offset 0
*/
.text
-#if defined(CONFIG_440)
- bl reconfig_tlb0
-#endif
- GET_GOT
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
- /* NOTREACHED - board_init_f() does not return */
+ bl _start_440
#endif
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD)
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
/*
- * 4xx RAM-booting U-Boot image is started from offset 0
+ * This is the entry of the real U-Boot from a board port
+ * that supports SPL booting on the PPC4xx. We only need
+ * to call board_init_f() here. Everything else has already
+ * been done in the SPL u-boot version.
*/
- .text
- bl _start_440
+ GET_GOT /* initialize GOT access */
+ bl board_init_f /* run 1st part of board init code (in Flash)*/
+ /* NOTREACHED - board_init_f() does not return */
#endif
/*
*/
#if defined(CONFIG_440)
-#if !defined(CONFIG_NAND_SPL)
.section .bootpg,"ax"
-#endif
.globl _start_440
/**************************************************************************/
* r3 - 1st arg to board_init(): IMMP pointer
* r4 - 2nd arg to board_init(): boot flag
*/
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_SPL_BUILD)
.text
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
+ .ascii U_BOOT_VERSION_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start_of_vectors
.globl _start
_start:
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ /*
+ * This is the entry of the real U-Boot from a board port
+ * that supports SPL booting on the PPC4xx. We only need
+ * to call board_init_f() here. Everything else has already
+ * been done in the SPL u-boot version.
+ */
+ GET_GOT /* initialize GOT access */
+ bl board_init_f /* run 1st part of board init code (in Flash)*/
+ /* NOTREACHED - board_init_f() does not return */
+#endif
+
/*****************************************************************************/
#if defined(CONFIG_440)
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460SX)
mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_APM821XX)
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
lis r1, 0x0000
ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
mtdcr L2_CACHE_CFG,r1
ori r1,r1, 0x0980 /* fourth 64k */
mtdcr ISRAM0_SB3CR,r1
#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || \
- defined(CONFIG_460GT) || defined(CONFIG_APM821XX)
+ defined(CONFIG_460GT)
lis r1,0x0000 /* BAS = X_0000_0000 */
ori r1,r1,0x0984 /* first 64k */
mtdcr ISRAM0_SB0CR,r1
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_APM821XX)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,ISRAM1_DPC
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
+#ifndef CONFIG_SPL_BUILD
GET_GOT
+#endif
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
/* NOTREACHED - board_init_f() does not return */
-#endif
#endif /* CONFIG_440 */
/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
- /* NOTREACHED - board_init_f() does not return */
-
-#endif /* CONFIG_IOP480 */
-
-/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+#if defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405)
/*----------------------------------------------------------------------- */
stw r0, +12(r1) /* Save return addr (underflow vect) */
#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
GET_GOT /* initialize GOT access */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f /* run first part of init code (from Flash) */
/* NOTREACHED - board_init_f() does not return */
-#endif /* CONFIG_NAND_SPL */
-
-#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
+#endif /* CONFIG_405GP || CONFIG_405 || CONFIG_405EP */
/*----------------------------------------------------------------------- */
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_SPL_BUILD)
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception.
lwbrx r3,r0,r3
blr
+#if !defined(CONFIG_SPL_BUILD)
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
+ lwz r4,GOT(__bss_end)
cmplw 0, r3, r4
beq 7f
mtlr r4 /* restore link register */
blr
+#endif /* CONFIG_SPL_BUILD */
#if defined(CONFIG_440)
/*----------------------------------------------------------------------------+
blr
function_epilog(dcbz_area)
#endif /* CONFIG_440 */
-#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_SPL_BUILD */
/*------------------------------------------------------------------------------- */
/* Function: in8 */
blr
function_epilog(mftlb1)
#endif /* CONFIG_440 */
-
-#if defined(CONFIG_NAND_SPL)
-/*
- * void nand_boot_relocate(dst, src, bytes)
- *
- * r3 = Destination address to copy code to (in SDRAM)
- * r4 = Source address to copy code from
- * r5 = size to copy in bytes
- */
-nand_boot_relocate:
- mr r6,r3
- mr r7,r4
- mflr r8
-
- /*
- * Copy SPL from icache into SDRAM
- */
- subi r3,r3,4
- subi r4,r4,4
- srwi r5,r5,2
- mtctr r5
-..spl_loop:
- lwzu r0,4(r4)
- stwu r0,4(r3)
- bdnz ..spl_loop
-
- /*
- * Calculate "corrected" link register, so that we "continue"
- * in execution in destination range
- */
- sub r3,r7,r6 /* r3 = src - dst */
- sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
- mtlr r8
- blr
-
-nand_boot_common:
- /*
- * First initialize SDRAM. It has to be available *before* calling
- * nand_boot().
- */
- lis r3,CONFIG_SYS_SDRAM_BASE@h
- ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
- bl initdram
-
- /*
- * Now copy the 4k SPL code into SDRAM and continue execution
- * from there.
- */
- lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
- ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
- lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
- ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
- lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
- ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
- bl nand_boot_relocate
-
- /*
- * We're running from SDRAM now!!!
- *
- * It is necessary for 4xx systems to relocate from running at
- * the original location (0xfffffxxx) to somewhere else (SDRAM
- * preferably). This is because CS0 needs to be reconfigured for
- * NAND access. And we can't reconfigure this CS when currently
- * "running" from it.
- */
-
- /*
- * Finally call nand_boot() to load main NAND U-Boot image from
- * NAND and jump to it.
- */
- bl nand_boot /* will not return */
-#endif /* CONFIG_NAND_SPL */