*-------------------------------------------------------------------------------
*/
-/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
+/*
+ * Startup code for IBM/AMCC PowerPC 4xx (PPC4xx) based boards
*
- * The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
+ * The following description only applies to the NOR flash style booting.
+ * NAND booting is different. For more details about NAND booting on 4xx
+ * take a look at doc/README.nand-boot-ppc440.
*
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
+ * The CPU starts at address 0xfffffffc (last word in the address space).
+ * The U-Boot image therefore has to be located in the "upper" area of the
+ * flash (e.g. 512MiB - 0xfff80000 ... 0xffffffff). The default value for
+ * the boot chip-select (CS0) is quite big and covers this area. On the
+ * 405EX this is for example 0xffe00000 ... 0xffffffff. U-Boot will
+ * reconfigure this CS0 (and other chip-selects as well when configured
+ * this way) in the boot process to the "correct" values matching the
+ * board layout.
*/
+
#include <asm-offsets.h>
#include <config.h>
#include <asm/ppc4xx.h>
-#include <timestamp.h>
#include <version.h>
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
#include <asm/mmu.h>
#include <asm/ppc4xx-isram.h>
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
#ifdef CONFIG_SYS_INIT_DCACHE_CS
# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
# define PBxAP PB1AP
GOT_ENTRY(transfer_to_handler)
GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_end__)
GOT_ENTRY(__bss_start)
END_GOT
#endif /* CONFIG_NAND_SPL */
/* NOTREACHED - board_init_f() does not return */
#endif
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD)
/*
* 4xx RAM-booting U-Boot image is started from offset 0
*/
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
+ .ascii U_BOOT_VERSION_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start_of_vectors
#endif /* CONFIG_440 */
-/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
- /* NOTREACHED - board_init_f() does not return */
-
-#endif /* CONFIG_IOP480 */
-
/*****************************************************************************/
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
relocate_code:
#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
+ * We need to flush the initial global data (gd_t) and bd_info
+ * before the dcache will be invalidated.
*/
/* Save registers */
mr r10, r4
mr r11, r5
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, GENERATED_GBL_DATA_SIZE@l
- bl flush_dcache_range
+ /*
+ * Flush complete dcache, this is faster than flushing the
+ * ranges for global_data and bd_info instead.
+ */
+ bl flush_dcache
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
+ lwz r4,GOT(__bss_end__)
cmplw 0, r3, r4
beq 7f