#define __ASM_PPC_FSL_LBC_H
#include <config.h>
+#include <common.h>
/* BR - Base Registers
*/
#define BR_V 0x00000001
#define BR_V_SHIFT 0
+#define BR_UPMx_TO_MSEL(x) ((x + 4) << BR_MSEL_SHIFT)
+
#define UPMA 0
#define UPMB 1
#define UPMC 2
#define LTESR_CC 0x00000001
#ifndef __ASSEMBLY__
-/*
- * Local Bus Controller Registers.
- */
-typedef struct lbus_bank {
- u32 br; /* Base Register */
- u32 or; /* Option Register */
-} lbus_bank_t;
-
-typedef struct fsl_lbus {
- lbus_bank_t bank[8];
- u8 res0[0x28];
- u32 mar; /* UPM Address Register */
- u8 res1[0x4];
- u32 mamr; /* UPMA Mode Register */
- u32 mbmr; /* UPMB Mode Register */
- u32 mcmr; /* UPMC Mode Register */
- u8 res2[0x8];
- u32 mrtpr; /* Memory Refresh Timer Prescaler Register */
- u32 mdr; /* UPM Data Register */
- u8 res3[0x4];
- u32 lsor; /* Special Operation Initiation Register */
- u32 lsdmr; /* SDRAM Mode Register */
- u8 res4[0x8];
- u32 lurt; /* UPM Refresh Timer */
- u32 lsrt; /* SDRAM Refresh Timer */
- u8 res5[0x8];
- u32 ltesr; /* Transfer Error Status Register */
- u32 ltedr; /* Transfer Error Disable Register */
- u32 lteir; /* Transfer Error Interrupt Register */
- u32 lteatr; /* Transfer Error Attributes Register */
- u32 ltear; /* Transfer Error Address Register */
- u8 res6[0xC];
- u32 lbcr; /* Configuration Register */
- u32 lcrr; /* Clock Ratio Register */
- u8 res7[0x8];
- u32 fmr; /* Flash Mode Register */
- u32 fir; /* Flash Instruction Register */
- u32 fcr; /* Flash Command Register */
- u32 fbar; /* Flash Block Addr Register */
- u32 fpar; /* Flash Page Addr Register */
- u32 fbcr; /* Flash Byte Count Register */
- u8 res8[0xF08];
-} fsl_lbus_t;
-#endif /* __ASSEMBLY__ */
+#include <asm/io.h>
+
+extern void print_lbc_regs(void);
+extern void init_early_memctl_regs(void);
+extern void upmconfig(uint upm, uint *table, uint size);
+
+#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR)
+#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br))
+#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or))
+#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v))
+#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v))
+
+typedef struct lbc_bank {
+ u32 br;
+ u32 or;
+} lbc_bank_t;
+/* Local Bus Controller Registers */
+typedef struct fsl_lbc {
+ lbc_bank_t bank[8];
+ u8 res1[40];
+ u32 mar; /* LBC UPM Addr */
+ u8 res2[4];
+ u32 mamr; /* LBC UPMA Mode */
+ u32 mbmr; /* LBC UPMB Mode */
+ u32 mcmr; /* LBC UPMC Mode */
+ u8 res3[8];
+ u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */
+ u32 mdr; /* LBC UPM Data */
+#ifdef CONFIG_FSL_ELBC
+ u8 res4[4];
+ u32 lsor;
+ u8 res5[12];
+ u32 lurt; /* LBC UPM Refresh Timer */
+ u8 res6[4];
+#else
+ u8 res4[8];
+ u32 lsdmr; /* LBC SDRAM Mode */
+ u8 res5[8];
+ u32 lurt; /* LBC UPM Refresh Timer */
+ u32 lsrt; /* LBC SDRAM Refresh Timer */
+#endif
+ u8 res7[8];
+ u32 ltesr; /* LBC Transfer Error Status */
+ u32 ltedr; /* LBC Transfer Error Disable */
+ u32 lteir; /* LBC Transfer Error IRQ */
+ u32 lteatr; /* LBC Transfer Error Attrs */
+ u32 ltear; /* LBC Transfer Error Addr */
+ u8 res8[12];
+ u32 lbcr; /* LBC Configuration */
+ u32 lcrr; /* LBC Clock Ratio */
+#ifdef CONFIG_NAND_FSL_ELBC
+ u8 res9[0x8];
+ u32 fmr; /* Flash Mode Register */
+ u32 fir; /* Flash Instruction Register */
+ u32 fcr; /* Flash Command Register */
+ u32 fbar; /* Flash Block Addr Register */
+ u32 fpar; /* Flash Page Addr Register */
+ u32 fbcr; /* Flash Byte Count Register */
+ u8 res10[0xF08];
+#else
+ u8 res9[0xF28];
+#endif
+} fsl_lbc_t;
+
+#endif /* __ASSEMBLY__ */
#endif /* __ASM_PPC_FSL_LBC_H */