static char *failed = "*** failed ***\n";
-#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
extern flash_info_t flash_info[];
#endif
#endif
extern ulong __init_end;
-extern ulong _end;
+extern ulong __bss_end__;
ulong monitor_flash_len;
#if defined(CONFIG_CMD_BEDBUG)
}
void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
+int __board_flash_wp_on(void)
+{
+ /*
+ * Most flashes can't be detected when write protection is enabled,
+ * so provide a way to let U-Boot gracefully ignore write protected
+ * devices.
+ */
+ return 0;
+}
+int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on")));
+
+void __cpu_secondary_init_r(void)
+{
+}
+void cpu_secondary_init_r(void)
+__attribute__((weak, alias("__cpu_secondary_init_r")));
static int init_func_ram (void)
{
* - monitor code
* - board info struct
*/
- len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
+ len = (ulong)&__bss_end__ - CONFIG_SYS_MONITOR_BASE;
/*
* Subtract specified amount of memory to hide so that it won't
debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
#ifdef CONFIG_LCD
+#ifdef CONFIG_FB_ADDR
+ gd->fb_base = CONFIG_FB_ADDR;
+#else
/* reserve memory for LCD display (always full pages) */
addr = lcd_setmem (addr);
gd->fb_base = addr;
+#endif /* CONFIG_FB_ADDR */
#endif /* CONFIG_LCD */
#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
*/
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
+ memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
#ifdef CONFIG_SYS_SRAM_BASE
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
-#else
- bd->bi_sramstart = 0;
- bd->bi_sramsize = 0;
#endif
#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
}
#endif
- bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
-
WATCHDOG_RESET ();
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
#endif
-#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
- * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
- * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
- * bridge there.
+ * Do early PCI configuration _before_ the flash gets initialised,
+ * because PCU ressources are crucial for flash access on some boards.
*/
pci_init ();
#endif
-#if defined(CONFIG_BAB7xx)
+#if defined(CONFIG_WINBOND_83C553)
/*
* Initialise the ISA bridge
*/
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
#if !defined(CONFIG_SYS_NO_FLASH)
- puts ("FLASH: ");
+ puts ("Flash: ");
- if ((flash_size = flash_init ()) > 0) {
+ if (board_flash_wp_on()) {
+ printf("Uninitialized - Write Protect On\n");
+ /* Since WP is on, we can't find real size. Set to 0 */
+ flash_size = 0;
+ } else if ((flash_size = flash_init ()) > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size (flash_size, "");
/*
#endif
-# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
+# if defined(CONFIG_OXC) || defined(CONFIG_RMU)
/* flash mapped at end of memory map */
- bd->bi_flashoffset = TEXT_BASE + flash_size;
+ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
-# else
- bd->bi_flashoffset = 0;
# endif
-#else /* CONFIG_SYS_NO_FLASH */
-
- bd->bi_flashsize = 0;
- bd->bi_flashstart = 0;
- bd->bi_flashoffset = 0;
#endif /* !CONFIG_SYS_NO_FLASH */
WATCHDOG_RESET ();
/* relocate environment function pointers etc. */
env_relocate ();
+ /*
+ * after non-volatile devices & environment is setup and cpu code have
+ * another round to deal with any initialization that might require
+ * full access to the environment or loading of some image (firmware)
+ * from a non-volatile device
+ */
+ cpu_secondary_init_r();
+
/*
* Fill in missing fields of bd_info.
* We do this here, where we have "normal" access to the
if (s && ((*s == 'y') || (*s == 'Y'))) {
bd->bi_iic_fast[0] = 1;
bd->bi_iic_fast[1] = 1;
- } else {
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
}
}
-#else
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
#endif /* CONFIG_I2CFAST */
#endif /* CONFIG_405GP, CONFIG_405EP */
#endif /* CONFIG_SYS_EXTBDINFO */
WATCHDOG_RESET ();
-#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
+#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
* Do pci configuration
*/
*/
interrupt_init ();
- /* Must happen after interrupts are initialized since
- * an irq handler gets installed
- */
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
- serial_buffered_init();
-#endif
-
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
udelay (20);
- set_timer (0);
-
/* Initialize from environment */
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
WATCHDOG_RESET ();
-#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
- dtt_init ();
-#endif
#if defined(CONFIG_CMD_SCSI)
WATCHDOG_RESET ();
puts ("SCSI: ");
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
-#if defined(CONFIG_NET_MULTI)
WATCHDOG_RESET ();
puts ("Net: ");
-#endif
eth_initialize (bd);
#endif