spl: Remove inline ifdef check for EXT and FAT support

[u-boot] / arch / x86 / Kconfig

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 64c824f7172a9a74e84bf39e62a0ea5c181160c6..0884af22a79edf3b245fb1c1c8a39d9eb871f1eb 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,9 +8,18 @@ choice
        prompt "Mainboard vendor"
        default VENDOR_EMULATION
 
+config VENDOR_ADVANTECH
+       bool "advantech"
+
+config VENDOR_CONGATEC
+       bool "congatec"
+
 config VENDOR_COREBOOT
        bool "coreboot"
 
+config VENDOR_DFI
+       bool "dfi"
+
 config VENDOR_EFI
        bool "efi"
 
@@ -26,7 +35,10 @@ config VENDOR_INTEL
 endchoice
 
 # board-specific options below
+source "board/advantech/Kconfig"
+source "board/congatec/Kconfig"
 source "board/coreboot/Kconfig"
+source "board/dfi/Kconfig"
 source "board/efi/Kconfig"
 source "board/emulation/Kconfig"
 source "board/google/Kconfig"
@@ -34,6 +46,7 @@ source "board/intel/Kconfig"
 
 # platform-specific options below
 source "arch/x86/cpu/baytrail/Kconfig"
+source "arch/x86/cpu/broadwell/Kconfig"
 source "arch/x86/cpu/coreboot/Kconfig"
 source "arch/x86/cpu/ivybridge/Kconfig"
 source "arch/x86/cpu/qemu/Kconfig"
@@ -42,6 +55,9 @@ source "arch/x86/cpu/queensbay/Kconfig"
 
 # architecture-specific options below
 
+config AHCI
+       default y
+
 config SYS_MALLOC_F_LEN
        default 0x800
 
@@ -266,6 +282,13 @@ config ENABLE_MRC_CACHE
          to be used for speeding up boot time on future reboots and/or
          power cycles.
 
+         For platforms that use Intel FSP for the memory initialization,
+         please check FSP output HOB via U-Boot command 'fsp hob' to see
+         if there is FSP_NON_VOLATILE_STORAGE_HOB_GUID (asm/fsp/fsp_hob.h).
+         If such GUID does not exist, MRC cache is not avaiable on such
+         platform (eg: Intel Queensbay), which means selecting this option
+         here does not make any difference.
+
 config HAVE_MRC
        bool "Add a System Agent binary"
        depends on !HAVE_FSP
@@ -327,6 +350,17 @@ config DCACHE_RAM_MRC_VAR_SIZE
          memory reference code and must be set correctly or the board will
          not boot.
 
+config HAVE_REFCODE
+        bool "Add a Reference Code binary"
+        help
+          Select this option to add a Reference Code binary to the resulting
+          U-Boot image. This is an Intel binary blob that handles system
+          initialisation, in this case the PCH and System Agent.
+
+          Note: Without this binary (on platforms that need it such as
+          broadwell) U-Boot will be missing some critical setup steps.
+          Various peripherals may fail to work.
+
 config SMP
        bool "Enable Symmetric Multiprocessing"
        default n
@@ -420,32 +454,13 @@ config GENERATE_MP_TABLE
 config GENERATE_ACPI_TABLE
        bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
        default n
+       select QFW if QEMU
        help
          The Advanced Configuration and Power Interface (ACPI) specification
          provides an open standard for device configuration and management
          by the operating system. It defines platform-independent interfaces
          for configuration and power management monitoring.
 
-config QEMU_ACPI_TABLE
-       bool "Load ACPI table from QEMU fw_cfg interface"
-       depends on GENERATE_ACPI_TABLE && QEMU
-       default y
-       help
-         By default, U-Boot generates its own ACPI tables. This option, if
-         enabled, disables U-Boot's version and loads ACPI tables generated
-         by QEMU.
-
-config GENERATE_SMBIOS_TABLE
-       bool "Generate an SMBIOS (System Management BIOS) table"
-       default y
-       help
-         The System Management BIOS (SMBIOS) specification addresses how
-         motherboard and system vendors present management information about
-         their products in a standard format by extending the BIOS interface
-         on Intel architecture systems.
-
-         Check http://www.dmtf.org/standards/smbios for details.
-
 endmenu
 
 config MAX_PIRQ_LINKS
@@ -504,12 +519,6 @@ config I8254_TIMER
          Intel 8254 timer contains three counters which have fixed uses.
          Include this to have U-Boot set up the timer correctly.
 
-config I8042_KEYB
-       default y
-
-config DM_KEYBOARD
-       default y
-
 config SEABIOS
        bool "Support booting SeaBIOS"
        help
@@ -520,6 +529,20 @@ config SEABIOS
 
          Check http://www.seabios.org/SeaBIOS for details.
 
+config HIGH_TABLE_SIZE
+       hex "Size of configuration tables which reside in high memory"
+       default 0x10000
+       depends on SEABIOS
+       help
+         SeaBIOS itself resides in E seg and F seg, where U-Boot puts all
+         configuration tables like PIRQ/MP/ACPI. To avoid conflicts, U-Boot
+         puts a copy of configuration tables in high memory region which
+         is reserved on the stack before relocation. The region size is
+         determined by this option.
+
+         Increse it if the default size does not fit the board's needs.
+         This is most likely due to a large ACPI DSDT table is used.
+
 source "arch/x86/lib/efi/Kconfig"
 
 endmenu