* Portions of this file are derived from the Linux kernel source
* Copyright (C) 1991, 1992 Linus Torvalds
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
+#include <asm/cache.h>
+#include <asm/control_regs.h>
#include <asm/interrupt.h>
#include <asm/io.h>
#include <asm/processor-flags.h>
#include <linux/compiler.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/u-boot-x86.h>
+#include <asm/i8259.h>
+
+DECLARE_GLOBAL_DATA_PTR;
#define DECLARE_INTERRUPT(x) \
".globl irq_"#x"\n" \
"pushl $"#x"\n" \
"jmp irq_common_entry\n"
-/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialisation
- */
-static unsigned long __force_order;
-
-static inline unsigned long read_cr0(void)
-{
- unsigned long val;
- asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline unsigned long read_cr2(void)
-{
- unsigned long val;
- asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline unsigned long read_cr3(void)
-{
- unsigned long val;
- asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline unsigned long read_cr4(void)
+static char *exceptions[] = {
+ "Divide Error",
+ "Debug",
+ "NMI Interrupt",
+ "Breakpoint",
+ "Overflow",
+ "BOUND Range Exceeded",
+ "Invalid Opcode (Undefined Opcode)",
+ "Device Not Avaiable (No Math Coprocessor)",
+ "Double Fault",
+ "Coprocessor Segment Overrun",
+ "Invalid TSS",
+ "Segment Not Present",
+ "Stack Segment Fault",
+ "General Protection",
+ "Page Fault",
+ "Reserved",
+ "x87 FPU Floating-Point Error",
+ "Alignment Check",
+ "Machine Check",
+ "SIMD Floating-Point Exception",
+ "Virtualization Exception",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved"
+};
+
+static void dump_regs(struct irq_regs *regs)
{
- unsigned long val;
- asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline unsigned long get_debugreg(int regno)
-{
- unsigned long val = 0; /* Damn you, gcc! */
+ unsigned long cs, eip, eflags;
+ unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+ unsigned long d0, d1, d2, d3, d6, d7;
+ unsigned long sp;
- switch (regno) {
- case 0:
- asm("mov %%db0, %0" : "=r" (val));
- break;
- case 1:
- asm("mov %%db1, %0" : "=r" (val));
- break;
- case 2:
- asm("mov %%db2, %0" : "=r" (val));
- break;
- case 3:
- asm("mov %%db3, %0" : "=r" (val));
- break;
- case 6:
- asm("mov %%db6, %0" : "=r" (val));
- break;
- case 7:
- asm("mov %%db7, %0" : "=r" (val));
+ /*
+ * Some exceptions cause an error code to be saved on the current stack
+ * after the EIP value. We should extract CS/EIP/EFLAGS from different
+ * position on the stack based on the exception number.
+ */
+ switch (regs->irq_id) {
+ case EXC_DF:
+ case EXC_TS:
+ case EXC_NP:
+ case EXC_SS:
+ case EXC_GP:
+ case EXC_PF:
+ case EXC_AC:
+ cs = regs->context.ctx2.xcs;
+ eip = regs->context.ctx2.eip;
+ eflags = regs->context.ctx2.eflags;
+ /* We should fix up the ESP due to error code */
+ regs->esp += 4;
break;
default:
- val = 0;
+ cs = regs->context.ctx1.xcs;
+ eip = regs->context.ctx1.eip;
+ eflags = regs->context.ctx1.eflags;
+ break;
}
- return val;
-}
-
-void dump_regs(struct irq_regs *regs)
-{
- unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
- unsigned long d0, d1, d2, d3, d6, d7;
- unsigned long sp;
printf("EIP: %04x:[<%08lx>] EFLAGS: %08lx\n",
- (u16)regs->xcs, regs->eip, regs->eflags);
+ (u16)cs, eip, eflags);
+ if (gd->flags & GD_FLG_RELOC)
+ printf("Original EIP :[<%08lx>]\n", eip - gd->reloc_off);
printf("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
regs->eax, regs->ebx, regs->ecx, regs->edx);
}
}
+static void do_exception(struct irq_regs *regs)
+{
+ printf("%s\n", exceptions[regs->irq_id]);
+ dump_regs(regs);
+ hang();
+}
+
struct idt_entry {
u16 base_low;
u16 selector;
struct desc_ptr {
unsigned short size;
unsigned long address;
- unsigned short segment;
} __packed;
struct idt_entry idt[256] __aligned(16);
int irq_entry_size = irq_1 - irq_0;
void *irq_entry = (void *)irq_0;
- /* Just in case... */
- disable_interrupts();
-
/* Setup the IDT */
for (i = 0; i < 256; i++) {
idt[i].access = 0x8e;
idt[i].res = 0;
- idt[i].selector = 0x10;
+ idt[i].selector = X86_GDT_ENTRY_32BIT_CS * X86_GDT_ENTRY_SIZE;
set_vector(i, irq_entry);
irq_entry += irq_entry_size;
}
- idt_ptr.size = 256 * 8;
+ idt_ptr.size = 256 * 8 - 1;
idt_ptr.address = (unsigned long) idt;
- idt_ptr.segment = 0x18;
load_idt(&idt_ptr);
- /* It is now safe to enable interrupts */
- enable_interrupts();
-
return 0;
}
+void *x86_get_idt(void)
+{
+ return &idt_ptr;
+}
+
void __do_irq(int irq)
{
printf("Unhandled IRQ : %d\n", irq);
return flags & X86_EFLAGS_IF;
}
+int interrupt_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ /* Try to set up the interrupt router, but don't require one */
+ ret = uclass_first_device(UCLASS_IRQ, &dev);
+ if (ret && ret != -ENODEV)
+ return ret;
+
+ /*
+ * When running as an EFI application we are not in control of
+ * interrupts and should leave them alone.
+ */
+#ifndef CONFIG_EFI_APP
+ /* Just in case... */
+ disable_interrupts();
+
+#ifdef CONFIG_I8259_PIC
+ /* Initialize the master/slave i8259 pic */
+ i8259_init();
+#endif
+
+ /* Initialize core interrupt and exception functionality of CPU */
+ cpu_init_interrupts();
+
+ /*
+ * It is now safe to enable interrupts.
+ *
+ * TODO(sjg@chromium.org): But we don't handle these correctly when
+ * booted from EFI.
+ */
+ if (ll_boot_init())
+ enable_interrupts();
+#endif
+
+ return 0;
+}
+
/* IRQ Low-Level Service Routine */
void irq_llsr(struct irq_regs *regs)
{
* Order Number: 253665-029US, November 2008
* Table 6-1. Exceptions and Interrupts
*/
- switch (regs->irq_id) {
- case 0x00:
- printf("Divide Error (Division by zero)\n");
- dump_regs(regs);
- hang();
- break;
- case 0x01:
- printf("Debug Interrupt (Single step)\n");
- dump_regs(regs);
- break;
- case 0x02:
- printf("NMI Interrupt\n");
- dump_regs(regs);
- break;
- case 0x03:
- printf("Breakpoint\n");
- dump_regs(regs);
- break;
- case 0x04:
- printf("Overflow\n");
- dump_regs(regs);
- hang();
- break;
- case 0x05:
- printf("BOUND Range Exceeded\n");
- dump_regs(regs);
- hang();
- break;
- case 0x06:
- printf("Invalid Opcode (UnDefined Opcode)\n");
- dump_regs(regs);
- hang();
- break;
- case 0x07:
- printf("Device Not Available (No Math Coprocessor)\n");
- dump_regs(regs);
- hang();
- break;
- case 0x08:
- printf("Double fault\n");
- dump_regs(regs);
- hang();
- break;
- case 0x09:
- printf("Co-processor segment overrun\n");
- dump_regs(regs);
- hang();
- break;
- case 0x0a:
- printf("Invalid TSS\n");
- dump_regs(regs);
- break;
- case 0x0b:
- printf("Segment Not Present\n");
- dump_regs(regs);
- hang();
- break;
- case 0x0c:
- printf("Stack Segment Fault\n");
- dump_regs(regs);
- hang();
- break;
- case 0x0d:
- printf("General Protection\n");
- dump_regs(regs);
- break;
- case 0x0e:
- printf("Page fault\n");
- dump_regs(regs);
- hang();
- break;
- case 0x0f:
- printf("Floating-Point Error (Math Fault)\n");
- dump_regs(regs);
- break;
- case 0x10:
- printf("Alignment check\n");
- dump_regs(regs);
- break;
- case 0x11:
- printf("Machine Check\n");
- dump_regs(regs);
- break;
- case 0x12:
- printf("SIMD Floating-Point Exception\n");
- dump_regs(regs);
- break;
- case 0x13:
- case 0x14:
- case 0x15:
- case 0x16:
- case 0x17:
- case 0x18:
- case 0x19:
- case 0x1a:
- case 0x1b:
- case 0x1c:
- case 0x1d:
- case 0x1e:
- case 0x1f:
- printf("Reserved Exception\n");
- dump_regs(regs);
- break;
-
- default:
+ if (regs->irq_id < 32) {
+ /* Architecture defined exception */
+ do_exception(regs);
+ } else {
/* Hardware or User IRQ */
do_irq(regs->irq_id);
}
projects / u-boot / blobdiff