+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014 Google, Inc
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <malloc.h>
#include <pch.h>
+#include <asm/cpu.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
#include <asm/lapic.h>
+#include <asm/lpc_common.h>
#include <asm/pci.h>
-#include <asm/arch/bd82x6x.h>
#include <asm/arch/model_206ax.h>
#include <asm/arch/pch.h>
#include <asm/arch/sandybridge.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GPIO_BASE 0x48
#define BIOS_CTRL 0xdc
-void bd82x6x_pci_init(pci_dev_t dev)
+#ifndef CONFIG_HAVE_FSP
+static int pch_revision_id = -1;
+static int pch_type = -1;
+
+/**
+ * pch_silicon_revision() - Read silicon revision ID from the PCH
+ *
+ * @dev: PCH device
+ * @return silicon revision ID
+ */
+static int pch_silicon_revision(struct udevice *dev)
{
- u16 reg16;
- u8 reg8;
-
- debug("bd82x6x PCI init.\n");
- /* Enable Bus Master */
- reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
- reg16 |= PCI_COMMAND_MASTER;
- x86_pci_write_config16(dev, PCI_COMMAND, reg16);
-
- /* This device has no interrupt */
- x86_pci_write_config8(dev, INTR, 0xff);
-
- /* disable parity error response and SERR */
- reg16 = x86_pci_read_config16(dev, BCTRL);
- reg16 &= ~(1 << 0);
- reg16 &= ~(1 << 1);
- x86_pci_write_config16(dev, BCTRL, reg16);
-
- /* Master Latency Count must be set to 0x04! */
- reg8 = x86_pci_read_config8(dev, SMLT);
- reg8 &= 0x07;
- reg8 |= (0x04 << 3);
- x86_pci_write_config8(dev, SMLT, reg8);
-
- /* Will this improve throughput of bus masters? */
- x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
-
- /* Clear errors in status registers */
- reg16 = x86_pci_read_config16(dev, PSTS);
- /* reg16 |= 0xf900; */
- x86_pci_write_config16(dev, PSTS, reg16);
-
- reg16 = x86_pci_read_config16(dev, SECSTS);
- /* reg16 |= 0xf900; */
- x86_pci_write_config16(dev, SECSTS, reg16);
+ u8 val;
+
+ if (pch_revision_id < 0) {
+ dm_pci_read_config8(dev, PCI_REVISION_ID, &val);
+ pch_revision_id = val;
+ }
+
+ return pch_revision_id;
}
-static int bd82x6x_probe(struct udevice *dev)
+int pch_silicon_type(struct udevice *dev)
{
- const void *blob = gd->fdt_blob;
- struct pci_controller *hose;
- struct x86_cpu_priv *cpu;
- int sata_node, gma_node;
- int ret;
+ u8 val;
- if (!(gd->flags & GD_FLG_RELOC))
- return 0;
+ if (pch_type < 0) {
+ dm_pci_read_config8(dev, PCI_DEVICE_ID + 1, &val);
+ pch_type = val;
+ }
- hose = pci_bus_to_hose(0);
- lpc_enable(PCH_LPC_DEV);
- lpc_init(hose, PCH_LPC_DEV);
- sata_node = fdtdec_next_compatible(blob, 0,
- COMPAT_INTEL_PANTHERPOINT_AHCI);
- if (sata_node < 0) {
- debug("%s: Cannot find SATA node\n", __func__);
- return -EINVAL;
+ return pch_type;
+}
+
+/**
+ * pch_silicon_supported() - Check if a certain revision is supported
+ *
+ * @dev: PCH device
+ * @type: PCH type
+ * @rev: Minimum required resion
+ * @return 0 if not supported, 1 if supported
+ */
+static int pch_silicon_supported(struct udevice *dev, int type, int rev)
+{
+ int cur_type = pch_silicon_type(dev);
+ int cur_rev = pch_silicon_revision(dev);
+
+ switch (type) {
+ case PCH_TYPE_CPT:
+ /* CougarPoint minimum revision */
+ if (cur_type == PCH_TYPE_CPT && cur_rev >= rev)
+ return 1;
+ /* PantherPoint any revision */
+ if (cur_type == PCH_TYPE_PPT)
+ return 1;
+ break;
+
+ case PCH_TYPE_PPT:
+ /* PantherPoint minimum revision */
+ if (cur_type == PCH_TYPE_PPT && cur_rev >= rev)
+ return 1;
+ break;
}
- bd82x6x_sata_init(PCH_SATA_DEV, blob, sata_node);
- bd82x6x_usb_ehci_init(PCH_EHCI1_DEV);
- bd82x6x_usb_ehci_init(PCH_EHCI2_DEV);
-
- cpu = calloc(1, sizeof(*cpu));
- if (!cpu)
- return -ENOMEM;
- model_206ax_init(cpu);
-
- gma_node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_GMA);
- if (gma_node < 0) {
- debug("%s: Cannot find GMA node\n", __func__);
- return -EINVAL;
+
+ return 0;
+}
+
+#define IOBP_RETRY 1000
+static inline int iobp_poll(void)
+{
+ unsigned try = IOBP_RETRY;
+ u32 data;
+
+ while (try--) {
+ data = readl(RCB_REG(IOBPS));
+ if ((data & 1) == 0)
+ return 1;
+ udelay(10);
}
- ret = dm_pci_bus_find_bdf(PCH_VIDEO_DEV, &dev);
- if (ret)
- return ret;
- ret = gma_func0_init(dev, blob, gma_node);
- if (ret)
- return ret;
+ printf("IOBP timeout\n");
return 0;
}
-/* TODO(sjg@chromium.org): Move this to the PCH init() method */
-int bd82x6x_init_extra(void)
+void pch_iobp_update(struct udevice *dev, u32 address, u32 andvalue,
+ u32 orvalue)
{
- const void *blob = gd->fdt_blob;
- int sata_node;
-
- sata_node = fdtdec_next_compatible(blob, 0,
- COMPAT_INTEL_PANTHERPOINT_AHCI);
- if (sata_node < 0) {
- debug("%s: Cannot find SATA node\n", __func__);
- return -EINVAL;
+ u32 data;
+
+ /* Set the address */
+ writel(address, RCB_REG(IOBPIRI));
+
+ /* READ OPCODE */
+ if (pch_silicon_supported(dev, PCH_TYPE_CPT, PCH_STEP_B0))
+ writel(IOBPS_RW_BX, RCB_REG(IOBPS));
+ else
+ writel(IOBPS_READ_AX, RCB_REG(IOBPS));
+ if (!iobp_poll())
+ return;
+
+ /* Read IOBP data */
+ data = readl(RCB_REG(IOBPD));
+ if (!iobp_poll())
+ return;
+
+ /* Check for successful transaction */
+ if ((readl(RCB_REG(IOBPS)) & 0x6) != 0) {
+ printf("IOBP read 0x%08x failed\n", address);
+ return;
}
- bd82x6x_pci_init(PCH_DEV);
- bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
- northbridge_enable(PCH_DEV);
- northbridge_init(PCH_DEV);
+ /* Update the data */
+ data &= andvalue;
+ data |= orvalue;
+
+ /* WRITE OPCODE */
+ if (pch_silicon_supported(dev, PCH_TYPE_CPT, PCH_STEP_B0))
+ writel(IOBPS_RW_BX, RCB_REG(IOBPS));
+ else
+ writel(IOBPS_WRITE_AX, RCB_REG(IOBPS));
+ if (!iobp_poll())
+ return;
+
+ /* Write IOBP data */
+ writel(data, RCB_REG(IOBPD));
+ if (!iobp_poll())
+ return;
+}
+
+static int bd82x6x_probe(struct udevice *dev)
+{
+ if (!(gd->flags & GD_FLG_RELOC))
+ return 0;
+
+ /* Cause the SATA device to do its init */
+ uclass_first_device(UCLASS_AHCI, &dev);
return 0;
}
+#endif /* CONFIG_HAVE_FSP */
-static int bd82x6x_pch_get_sbase(struct udevice *dev, ulong *sbasep)
+static int bd82x6x_pch_get_spi_base(struct udevice *dev, ulong *sbasep)
{
u32 rcba;
return 0;
}
-static enum pch_version bd82x6x_pch_get_version(struct udevice *dev)
+static int bd82x6x_set_spi_protect(struct udevice *dev, bool protect)
{
- return PCHV_9;
+ return lpc_set_spi_protect(dev, BIOS_CTRL, protect);
}
-static int bd82x6x_set_spi_protect(struct udevice *dev, bool protect)
+static int bd82x6x_get_gpio_base(struct udevice *dev, u32 *gbasep)
{
- uint8_t bios_cntl;
-
- /* Adjust the BIOS write protect and SMM BIOS Write Protect Disable */
- dm_pci_read_config8(dev, BIOS_CTRL, &bios_cntl);
- if (protect) {
- bios_cntl &= ~BIOS_CTRL_BIOSWE;
- bios_cntl |= BIT(5);
- } else {
- bios_cntl |= BIOS_CTRL_BIOSWE;
- bios_cntl &= ~BIT(5);
+ u32 base;
+
+ /*
+ * GPIO_BASE moved to its current offset with ICH6, but prior to
+ * that it was unused (or undocumented). Check that it looks
+ * okay: not all ones or zeros.
+ *
+ * Note we don't need check bit0 here, because the Tunnel Creek
+ * GPIO base address register bit0 is reserved (read returns 0),
+ * while on the Ivybridge the bit0 is used to indicate it is an
+ * I/O space.
+ */
+ dm_pci_read_config32(dev, GPIO_BASE, &base);
+ if (base == 0x00000000 || base == 0xffffffff) {
+ debug("%s: unexpected BASE value\n", __func__);
+ return -ENODEV;
}
- dm_pci_write_config8(dev, BIOS_CTRL, bios_cntl);
+
+ /*
+ * Okay, I guess we're looking at the right device. The actual
+ * GPIO registers are in the PCI device's I/O space, starting
+ * at the offset that we just read. Bit 0 indicates that it's
+ * an I/O address, not a memory address, so mask that off.
+ */
+ *gbasep = base & 1 ? base & ~3 : base & ~15;
return 0;
}
static const struct pch_ops bd82x6x_pch_ops = {
- .get_sbase = bd82x6x_pch_get_sbase,
- .get_version = bd82x6x_pch_get_version,
+ .get_spi_base = bd82x6x_pch_get_spi_base,
.set_spi_protect = bd82x6x_set_spi_protect,
+ .get_gpio_base = bd82x6x_get_gpio_base,
};
static const struct udevice_id bd82x6x_ids[] = {
.name = "bd82x6x",
.id = UCLASS_PCH,
.of_match = bd82x6x_ids,
+#ifndef CONFIG_HAVE_FSP
.probe = bd82x6x_probe,
+#endif
.ops = &bd82x6x_pch_ops,
};
projects / u-boot / blobdiff