*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <asm/cpu.h>
#include <asm/io.h>
+#include <asm/lapic.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
#include <asm/pci.h>
pci_hose_write_config_byte(hose, dev, 0xdc, reg8);
}
-static void set_var_mtrr(
- unsigned reg, unsigned base, unsigned size, unsigned type)
-
-{
- /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */
- /* FIXME: It only support 4G less range */
- wrmsr(MTRRphysBase_MSR(reg), base | type, 0);
- wrmsr(MTRRphysMask_MSR(reg), ~(size - 1) | MTRRphysMaskValid,
- (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1);
-}
-
-static void enable_rom_caching(void)
-{
- disable_caches();
- set_var_mtrr(1, 0xffc00000, 4 << 20, MTRR_TYPE_WRPROT);
- enable_caches();
-
- /* Enable Variable MTRRs */
- wrmsr(MTRRdefType_MSR, 0x800, 0);
-}
-
static int set_flex_ratio_to_tdp_nominal(void)
{
msr_t flex_ratio, msr;
/* Issue warm reset, will be "CPU only" due to soft reset data */
outb(0x0, PORT_RESET);
- outb(0x6, PORT_RESET);
+ outb(SYS_RST | RST_CPU, PORT_RESET);
cpu_hlt();
/* Not reached */
}
int arch_cpu_init(void)
+{
+ post_code(POST_CPU_INIT);
+
+ return x86_cpu_init_f();
+}
+
+int arch_cpu_init_dm(void)
{
const void *blob = gd->fdt_blob;
struct pci_controller *hose;
+ struct udevice *bus;
int node;
int ret;
- post_code(POST_CPU_INIT);
- timer_set_base(rdtsc());
-
- ret = x86_cpu_init_f();
+ post_code(0x70);
+ ret = uclass_get_device(UCLASS_PCI, 0, &bus);
+ post_code(0x71);
if (ret)
return ret;
+ post_code(0x72);
+ hose = dev_get_uclass_priv(bus);
- ret = pci_early_init_hose(&hose);
- if (ret)
- return ret;
+ /* TODO(sjg@chromium.org): Get rid of gd->hose */
+ gd->hose = hose;
- node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_LPC);
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH);
if (node < 0)
return -ENOENT;
ret = lpc_early_init(gd->fdt_blob, node, PCH_LPC_DEV);
/* This is already done in start.S, but let's do it in C */
enable_port80_on_lpc(hose, PCH_LPC_DEV);
- /* already done in car.S */
- if (false)
- enable_rom_caching();
-
set_spi_speed();
/*
dev = PCI_BDF(0x0, 0x1f, 0x3);
/* Check to make sure we've got the right device. */
- value = pci_read_config16(dev, 0x0);
+ value = x86_pci_read_config16(dev, 0x0);
if (value != 0x8086) {
printf("SMBus controller not found\n");
return -ENOSYS;
}
/* Set SMBus I/O base. */
- pci_write_config32(dev, SMB_BASE,
- SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+ x86_pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
/* Set SMBus enable. */
- pci_write_config8(dev, HOSTC, HST_EN);
+ x86_pci_write_config8(dev, HOSTC, HST_EN);
/* Set SMBus I/O space enable. */
- pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+ x86_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
/* Disable interrupt generation. */
outb(0, SMBUS_IO_BASE + SMBHSTCTL);
u32 cmd;
/* USB Controller 1 */
- pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
- PCH_EHCI0_TEMP_BAR0);
- cmd = pci_read_config32(usb0, PCI_COMMAND);
+ x86_pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+ PCH_EHCI0_TEMP_BAR0);
+ cmd = x86_pci_read_config32(usb0, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb0, PCI_COMMAND, cmd);
+ x86_pci_write_config32(usb0, PCI_COMMAND, cmd);
/* USB Controller 1 */
- pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
- PCH_EHCI1_TEMP_BAR0);
- cmd = pci_read_config32(usb1, PCI_COMMAND);
+ x86_pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = x86_pci_read_config32(usb1, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb1, PCI_COMMAND, cmd);
+ x86_pci_write_config32(usb1, PCI_COMMAND, cmd);
/* USB3 Controller */
- pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
- PCH_XHCI_TEMP_BAR0);
- cmd = pci_read_config32(usb3, PCI_COMMAND);
+ x86_pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
+ PCH_XHCI_TEMP_BAR0);
+ cmd = x86_pci_read_config32(usb3, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb3, PCI_COMMAND, cmd);
+ x86_pci_write_config32(usb3, PCI_COMMAND, cmd);
}
static int report_bist_failure(void)
{
if (gd->arch.bist != 0) {
+ post_code(POST_BIST_FAILURE);
printf("BIST failed: %08x\n", gd->arch.bist);
return -EFAULT;
}
if (ret)
return ret;
+ enable_lapic();
+
ret = microcode_update_intel();
- if (ret && ret != -ENOENT && ret != -EEXIST)
+ if (ret)
return ret;
/* Enable upper 128bytes of CMOS */
/* System is not happy after keyboard reset... */
debug("Issuing CF9 warm reset\n");
- outb(0x6, 0xcf9);
- cpu_hlt();
+ reset_cpu(0);
}
/* Early chipset init required before RAM init can work */
pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT);
if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) {
-#if CONFIG_HAVE_ACPI_RESUME
- debug("Resume from S3 detected.\n");
- boot_mode = PEI_BOOT_RESUME;
- /* Clear SLP_TYPE. This will break stage2 but
- * we care for that when we get there.
- */
- outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT);
-#else
debug("Resume from S3 detected, but disabled.\n");
-#endif
} else {
/*
* TODO: An indication of life might be possible here (e.g.
gd->arch.pei_boot_mode = boot_mode;
/* TODO: Move this to the board or driver */
- pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
- pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+ x86_pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+ x86_pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
/* Print processor name */
name = cpu_get_name(processor_name);
return 0;
}
+
+void board_debug_uart_init(void)
+{
+ /* This enables the debug UART */
+ pci_x86_write_config(NULL, PCH_LPC_DEV, LPC_EN, COMA_LPC_EN,
+ PCI_SIZE_16);
+}