*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <rtc.h>
int i;
/* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
- pci_write_config8(dev, ACPI_CNTL, 0x80);
+ x86_pci_write_config8(dev, ACPI_CNTL, 0x80);
writel(0, IO_APIC_INDEX);
writel(1 << 25, IO_APIC_DATA);
/* Set packet length and toggle silent mode bit for one frame. */
value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
#ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
- pci_write_config8(dev, SERIRQ_CNTL, value);
+ x86_pci_write_config8(dev, SERIRQ_CNTL, value);
#else
- pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+ x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
#endif
}
sizeof(route)))
return -EINVAL;
ptr = route;
- pci_write_config8(dev, PIRQA_ROUT, *ptr++);
- pci_write_config8(dev, PIRQB_ROUT, *ptr++);
- pci_write_config8(dev, PIRQC_ROUT, *ptr++);
- pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++);
- pci_write_config8(dev, PIRQE_ROUT, *ptr++);
- pci_write_config8(dev, PIRQF_ROUT, *ptr++);
- pci_write_config8(dev, PIRQG_ROUT, *ptr++);
- pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++);
/*
* TODO(sjg@chromium.org): U-Boot does not set up the interrupts
for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
reg |= route[gpi] << (gpi * 2);
- pci_write_config32(dev, 0xb8, reg);
+ x86_pci_write_config32(dev, 0xb8, reg);
return 0;
}
*/
pwr_on = MAINBOARD_POWER_ON;
- reg16 = pci_read_config16(dev, GEN_PMCON_3);
+ reg16 = x86_pci_read_config16(dev, GEN_PMCON_3);
reg16 &= 0xfffe;
switch (pwr_on) {
case MAINBOARD_POWER_OFF:
reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */
- pci_write_config16(dev, GEN_PMCON_3, reg16);
+ x86_pci_write_config16(dev, GEN_PMCON_3, reg16);
debug("Set power %s after power failure.\n", state);
/* Set up NMI on errors. */
outb(reg8, 0x70);
/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
- reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
reg16 &= ~(3 << 0); /* SMI# rate 1 minute */
reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */
#if DEBUG_PERIODIC_SMIS
/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
reg16 |= (3 << 0); /* Periodic SMI every 8s */
#endif
- pci_write_config16(dev, GEN_PMCON_1, reg16);
+ x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
/* Set the board's GPI routing. */
ret = pch_gpi_routing(blob, node, dev);
if (ret)
return ret;
- pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+ pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe;
writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
"intel,gpe0-enable", 0));
int rtc_failed;
u8 reg8;
- reg8 = pci_read_config8(dev, GEN_PMCON_3);
+ reg8 = x86_pci_read_config8(dev, GEN_PMCON_3);
rtc_failed = reg8 & RTC_BATTERY_DEAD;
if (rtc_failed) {
reg8 &= ~RTC_BATTERY_DEAD;
- pci_write_config8(dev, GEN_PMCON_3, reg8);
+ x86_pci_write_config8(dev, GEN_PMCON_3, reg8);
}
debug("rtc_failed = 0x%x\n", rtc_failed);
-#if CONFIG_HAVE_ACPI_RESUME
- /* Avoid clearing pending interrupts and resetting the RTC control
- * register in the resume path because the Linux kernel relies on
- * this to know if it should restart the RTC timerqueue if the wake
- * was due to the RTC alarm.
- */
- if (acpi_get_slp_type() == 3)
- return;
-#endif
/* TODO: Handle power failure */
if (rtc_failed)
printf("RTC power failed\n");
- rtc_init();
}
/* CougarPoint PCH Power Management init */
static void cpt_pm_init(pci_dev_t dev)
{
debug("CougarPoint PM init\n");
- pci_write_config8(dev, 0xa9, 0x47);
+ x86_pci_write_config8(dev, 0xa9, 0x47);
setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
setbits_le32(RCB_REG(0x228c), 1 << 0);
static void ppt_pm_init(pci_dev_t dev)
{
debug("PantherPoint PM init\n");
- pci_write_config8(dev, 0xa9, 0x47);
+ x86_pci_write_config8(dev, 0xa9, 0x47);
setbits_le32(RCB_REG(0x2238), 1 << 0);
setbits_le32(RCB_REG(0x228c), 1 << 0);
setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
setbits_le32(RCB_REG(0x2234), 0xf);
- reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
reg16 |= (1 << 2) | (1 << 11);
- pci_write_config16(dev, GEN_PMCON_1, reg16);
+ x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
#if TEST_SMM_FLASH_LOCKDOWN
/* Now try this: */
debug("Locking BIOS to RO... ");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
reg8 &= ~(1 << 0); /* clear BIOSWE */
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
reg8 |= (1 << 1); /* set BLE */
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
debug("ok.\n");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
writeb(0, 0xfff00000);
debug("Testing:\n");
reg8 |= (1 << 0); /* set BIOSWE */
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
debug("Done.\n");
u8 reg8;
debug("Enabling BIOS updates outside of SMM... ");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
reg8 &= ~(1 << 5);
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
}
static void pch_fixups(pci_dev_t dev)
u8 gen_pmcon_2;
/* Indicate DRAM init done for MRC S3 to know it can resume */
- gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2);
+ gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2);
gen_pmcon_2 |= (1 << 7);
- pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+ x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
/* Enable DMI ASPM in the PCH */
clrbits_le32(RCB_REG(0x2304), 1 << 10);
return -EINVAL;
/* Set COM1/COM2 decode range */
- pci_write_config16(dev, LPC_IO_DEC, 0x0010);
+ x86_pci_write_config16(dev, LPC_IO_DEC, 0x0010);
/* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */
- pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
+ x86_pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
GAMEL_LPC_EN | COMA_LPC_EN);
/* Write all registers but use 0 if we run out of data */
if (i < count)
reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16);
- pci_write_config32(dev, LPC_GENX_DEC(i), reg);
+ x86_pci_write_config32(dev, LPC_GENX_DEC(i), reg);
}
return 0;
pci_write_bar32(hose, dev, 3, 0x800);
pci_write_bar32(hose, dev, 4, 0x900);
- node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_LPC);
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH);
if (node < 0)
return -ENOENT;
/* Set the value for PCI command register. */
- pci_write_config16(dev, PCI_COMMAND, 0x000f);
+ x86_pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
pch_enable_apic(dev);
writew(0x0010, RCB_REG(DISPBDF));
setbits_le32(RCB_REG(FD2), PCH_ENABLE_DBDF);
}
+
+static const struct udevice_id bd82x6x_lpc_ids[] = {
+ { .compatible = "intel,bd82x6x-lpc" },
+ { }
+};
+
+U_BOOT_DRIVER(bd82x6x_lpc_drv) = {
+ .name = "lpc",
+ .id = UCLASS_LPC,
+ .of_match = bd82x6x_lpc_ids,
+};