*/
#include <common.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <pci.h>
#include <asm/io.h>
-#include <asm/pci.h>
+#include <asm/irq.h>
#include <asm/post.h>
+#include <asm/arch/device.h>
#include <asm/arch/tnc.h>
#include <asm/fsp/fsp_support.h>
#include <asm/processor.h>
-static void unprotect_spi_flash(void)
+static int __maybe_unused disable_igd(void)
{
- u32 bc;
-
- bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
- bc |= 0x1; /* unprotect the flash */
- pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
-}
-
-int arch_cpu_init(void)
-{
- struct pci_controller *hose;
+ struct udevice *igd, *sdvo;
int ret;
- post_code(POST_CPU_INIT);
-#ifdef CONFIG_SYS_X86_TSC_TIMER
- timer_set_base(rdtsc());
-#endif
-
- ret = x86_cpu_init_f();
+ ret = dm_pci_bus_find_bdf(TNC_IGD, &igd);
if (ret)
return ret;
+ if (!igd)
+ return 0;
- ret = pci_early_init_hose(&hose);
+ ret = dm_pci_bus_find_bdf(TNC_SDVO, &sdvo);
if (ret)
return ret;
+ if (!sdvo)
+ return 0;
+
+ /*
+ * According to Atom E6xx datasheet, setting VGA Disable (bit17)
+ * of Graphics Controller register (offset 0x50) prevents IGD
+ * (D2:F0) from reporting itself as a VGA display controller
+ * class in the PCI configuration space, and should also prevent
+ * it from responding to VGA legacy memory range and I/O addresses.
+ *
+ * However test result shows that with just VGA Disable bit set and
+ * a PCIe graphics card connected to one of the PCIe controllers on
+ * the E6xx, accessing the VGA legacy space still causes system hang.
+ * After a number of attempts, it turns out besides VGA Disable bit,
+ * the SDVO (D3:F0) device should be disabled to make it work.
+ *
+ * To simplify, use the Function Disable register (offset 0xc4)
+ * to disable both IGD (D2:F0) and SDVO (D3:F0) devices. Now these
+ * two devices will be completely disabled (invisible in the PCI
+ * configuration space) unless a system reset is performed.
+ */
+ dm_pci_write_config32(igd, IGD_FD, FUNC_DISABLE);
+ dm_pci_write_config32(sdvo, IGD_FD, FUNC_DISABLE);
- unprotect_spi_flash();
+ /*
+ * After setting the function disable bit, IGD and SDVO devices will
+ * disappear in the PCI configuration space. This however creates an
+ * inconsistent state from a driver model PCI controller point of view,
+ * as these two PCI devices are still attached to its parent's child
+ * device list as maintained by the driver model. Some driver model PCI
+ * APIs like dm_pci_find_class(), are referring to the list to speed up
+ * the finding process instead of re-enumerating the whole PCI bus, so
+ * it gets the stale cached data which is wrong.
+ *
+ * Note x86 PCI enueration normally happens twice, in pre-relocation
+ * phase and post-relocation. One option might be to call disable_igd()
+ * in one of the pre-relocation initialization hooks so that it gets
+ * disabled in the first round, and when it comes to the second round
+ * driver model PCI will construct a correct list. Unfortunately this
+ * does not work as Intel FSP is used on this platform to perform low
+ * level initialization, and fsp_init_phase_pci() is called only once
+ * in the post-relocation phase. If we disable IGD and SDVO devices,
+ * fsp_init_phase_pci() simply hangs and never returns.
+ *
+ * So the only option we have is to manually remove these two devices.
+ */
+ ret = device_remove(igd);
+ if (ret)
+ return ret;
+ ret = device_unbind(igd);
+ if (ret)
+ return ret;
+ ret = device_remove(sdvo);
+ if (ret)
+ return ret;
+ ret = device_unbind(sdvo);
+ if (ret)
+ return ret;
return 0;
}
-int print_cpuinfo(void)
+int arch_cpu_init(void)
{
- post_code(POST_CPU_INFO);
- return default_print_cpuinfo();
-}
+ int ret;
-void reset_cpu(ulong addr)
-{
- /* cold reset */
- outb(0x06, PORT_RESET);
+ post_code(POST_CPU_INIT);
+
+ ret = x86_cpu_init_f();
+ if (ret)
+ return ret;
+
+ return 0;
}
-void board_final_cleanup(void)
+int arch_early_init_r(void)
{
- u32 status;
+ int ret = 0;
- /* call into FspNotify */
- debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
- status = fsp_notify(NULL, INIT_PHASE_BOOT);
- if (status != FSP_SUCCESS)
- debug("fail, error code %x\n", status);
- else
- debug("OK\n");
+#ifdef CONFIG_DISABLE_IGD
+ ret = disable_igd();
+#endif
- return;
+ return ret;
}