ARM: uniphier: set DRAM_SPARSE flag for LD21 boards

[u-boot] / arch / x86 / dts / conga-qeval20-qa3-e3845.dts

diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
index 478dece1ae5a0b16d801bb4fce45b9b48ae66907..f0efe908e2c5b8d938e93319b7cc8937e3d21042 100644 (file)
--- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -30,6 +30,33 @@
 
        pch_pinctrl {
                compatible = "intel,x86-pinctrl";
+               reg = <0 0>;
+
+               /*
+                * As of today, the latest version FSP (gold4) for BayTrail
+                * misses the PAD configuration of the SD controller's Card
+                * Detect signal. The default PAD value for the CD pin sets
+                * the pin to work in GPIO mode, which causes card detect
+                * status cannot be reflected by the Present State register
+                * in the SD controller (bit 16 & bit 18 are always zero).
+                *
+                * Configure this pin to function 1 (SD controller).
+                */
+               sdmmc3_cd@0 {
+                       pad-offset = <0x3a0>;
+                       mode-func = <1>;
+               };
+
+               /* Add SMBus PAD configuration */
+               smbus_clk@0 {
+                       pad-offset = <0x580>;
+                       mode-func = <1>;
+               };
+
+               smbus_data@0 {
+                       pad-offset = <0x5a0>;
+                       mode-func = <1>;
+               };
        };
 
        chosen {
@@ -88,6 +115,7 @@
                                compatible = "intel,irq-router";
                                intel,pirq-config = "ibase";
                                intel,ibase-offset = <0x50>;
+                               intel,actl-addr = <0>;
                                intel,pirq-link = <8 8>;
                                intel,pirq-mask = <0xdee0>;
                                intel,pirq-routing = <
@@ -216,7 +244,7 @@
                fsp,mrc-init-mmio-size = <0x800>;
                fsp,mrc-init-spd-addr1 = <0xa0>;
                fsp,mrc-init-spd-addr2 = <0xa2>;
-               fsp,emmc-boot-mode = <2>;
+               fsp,emmc-boot-mode = <1>;
                fsp,enable-sdio;
                fsp,enable-sdcard;
                fsp,enable-hsuart1;
@@ -227,13 +255,6 @@
                fsp,lpss-sio-enable-pci-mode;
                fsp,enable-dma0;
                fsp,enable-dma1;
-               fsp,enable-i2c0;
-               fsp,enable-i2c1;
-               fsp,enable-i2c2;
-               fsp,enable-i2c3;
-               fsp,enable-i2c4;
-               fsp,enable-i2c5;
-               fsp,enable-i2c6;
                fsp,enable-pwm0;
                fsp,enable-pwm1;
                fsp,igd-dvmt50-pre-alloc = <2>;
@@ -269,10 +290,10 @@
 
        microcode {
                update@0 {
-#include "microcode/m0130673322.dtsi"
+#include "microcode/m0130673325.dtsi"
                };
                update@1 {
-#include "microcode/m0130679901.dtsi"
+#include "microcode/m0130679907.dtsi"
                };
        };
 };