+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
#ifndef _ASM_IO_H
#define _ASM_IO_H
+#include <linux/compiler.h>
+
/*
* This file contains the definitions for the x86 IO instructions
* inb/inw/inl/outb/outw/outl and the "string versions" of the same
#define readb(addr) (*(volatile unsigned char *) (addr))
#define readw(addr) (*(volatile unsigned short *) (addr))
#define readl(addr) (*(volatile unsigned int *) (addr))
+#define readq(addr) (*(volatile unsigned long long *) (addr))
#define __raw_readb readb
#define __raw_readw readw
#define __raw_readl readl
+#define __raw_readq readq
#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b))
#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b))
#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b))
+#define writeq(b,addr) (*(volatile unsigned long long *) (addr) = (b))
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
+#define __raw_writeq writeq
#define memset_io(a,b,c) memset((a),(b),(c))
#define memcpy_fromio(a,b,c) memcpy((a),(b),(c))
#define memcpy_toio(a,b,c) memcpy((a),(b),(c))
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define isa_readb(a) readb((a))
-#define isa_readw(a) readw((a))
-#define isa_readl(a) readl((a))
-#define isa_writeb(b,a) writeb(b,(a))
-#define isa_writew(w,a) writew(w,(a))
-#define isa_writel(l,a) writel(l,(a))
-#define isa_memset_io(a,b,c) memset_io((a),(b),(c))
-#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c))
-#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c))
-
-
-static inline int check_signature(unsigned long io_addr,
- const unsigned char *signature, int length)
-{
- int retval = 0;
- do {
- if (readb(io_addr) != *signature)
- goto out;
- io_addr++;
- signature++;
- length--;
- } while (length);
- retval = 1;
-out:
- return retval;
-}
+#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a)
+#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a))
-/**
- * isa_check_signature - find BIOS signatures
- * @io_addr: mmio address to check
- * @signature: signature block
- * @length: length of signature
- *
- * Perform a signature comparison with the ISA mmio address io_addr.
- * Returns 1 on a match.
- *
- * This function is deprecated. New drivers should use ioremap and
- * check_signature.
- */
+#define out_le64(a, v) out_arch(q, le64, a, v)
+#define out_le32(a, v) out_arch(l, le32, a, v)
+#define out_le16(a, v) out_arch(w, le16, a, v)
+#define in_le64(a) in_arch(q, le64, a)
+#define in_le32(a) in_arch(l, le32, a)
+#define in_le16(a) in_arch(w, le16, a)
-static inline int isa_check_signature(unsigned long io_addr,
- const unsigned char *signature, int length)
-{
- int retval = 0;
- do {
- if (isa_readb(io_addr) != *signature)
- goto out;
- io_addr++;
- signature++;
- length--;
- } while (length);
- retval = 1;
-out:
- return retval;
-}
+#define out_be32(a, v) out_arch(l, be32, a, v)
+#define out_be16(a, v) out_arch(w, be16, a, v)
+
+#define in_be32(a) in_arch(l, be32, a)
+#define in_be16(a) in_arch(w, be16, a)
+
+#define out_8(a, v) __raw_writeb(v, a)
+#define in_8(a) __raw_readb(a)
+
+#define clrbits(type, addr, clear) \
+ out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+ out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+ out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
#endif /* __KERNEL__ */
* Talk about misusing macros..
*/
#define __OUT1(s,x) \
-static inline void out##s(unsigned x value, unsigned short port) {
+static inline void _out##s(unsigned x value, unsigned short port) {
#define __OUT2(s,s1,s2) \
__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));}
#define __IN1(s) \
-static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
+static inline RETURN_TYPE _in##s(unsigned short port) { RETURN_TYPE _v;
#define __IN2(s,s1,s2) \
__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
__IN(l,"")
#undef RETURN_TYPE
+#define inb(port) _inb((uintptr_t)(port))
+#define inw(port) _inw((uintptr_t)(port))
+#define inl(port) _inl((uintptr_t)(port))
+
__OUT(b,"b",char)
__OUT(w,"w",short)
__OUT(l,,int)
+#define outb(val, port) _outb(val, (uintptr_t)(port))
+#define outw(val, port) _outw(val, (uintptr_t)(port))
+#define outl(val, port) _outl(val, (uintptr_t)(port))
+
__INS(b)
__INS(w)
__INS(l)
__OUTS(w)
__OUTS(l)
-static inline void sync(void)
-{
-}
+/* IO space accessors */
+#define clrio(type, addr, clear) \
+ out##type(in##type(addr) & ~(clear), (addr))
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-#define MAP_NOCACHE (0)
-#define MAP_WRCOMBINE (0)
-#define MAP_WRBACK (0)
-#define MAP_WRTHROUGH (0)
+#define setio(type, addr, set) \
+ out##type(in##type(addr) | (set), (addr))
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
- return (void *)paddr;
-}
+#define clrsetio(type, addr, clear, set) \
+ out##type((in##type(addr) & ~(clear)) | (set), (addr))
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
+#define clrio_32(addr, clear) clrio(l, addr, clear)
+#define clrio_16(addr, clear) clrio(w, addr, clear)
+#define clrio_8(addr, clear) clrio(b, addr, clear)
-}
+#define setio_32(addr, set) setio(l, addr, set)
+#define setio_16(addr, set) setio(w, addr, set)
+#define setio_8(addr, set) setio(b, addr, set)
+
+#define clrsetio_32(addr, clear, set) clrsetio(l, addr, clear, set)
+#define clrsetio_16(addr, clear, set) clrsetio(w, addr, clear, set)
+#define clrsetio_8(addr, clear, set) clrsetio(b, addr, clear, set)
-static inline phys_addr_t virt_to_phys(void * vaddr)
+static inline void sync(void)
{
- return (phys_addr_t)(vaddr);
}
/*
#define __iormb() dmb()
#define __iowmb() dmb()
-#endif
+#include <asm-generic/io.h>
+
+#endif /* _ASM_IO_H */
projects / u-boot / blobdiff