/*
+ * Copyright (c) 2011 The Chromium OS Authors.
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
#include <asm/realmode.h>
#include <asm/byteorder.h>
#include <asm/bootparam.h>
-#include <asm/ic/sc520.h>
/*
* Memory lay-out:
* 0x8000-0x8FFF Stack and heap
* 0x9000-0x90FF Kernel command line
*/
-#define DEFAULT_SETUP_BASE 0x90000
-#define COMMAND_LINE_OFFSET 0x9000
-#define HEAP_END_OFFSET 0x8e00
+#define DEFAULT_SETUP_BASE 0x90000
+#define COMMAND_LINE_OFFSET 0x9000
+#define HEAP_END_OFFSET 0x8e00
-#define COMMAND_LINE_SIZE 2048
+#define COMMAND_LINE_SIZE 2048
+
+unsigned generic_install_e820_map(unsigned max_entries,
+ struct e820entry *entries)
+{
+ return 0;
+}
+
+unsigned install_e820_map(unsigned max_entries,
+ struct e820entry *entries)
+ __attribute__((weak, alias("generic_install_e820_map")));
static void build_command_line(char *command_line, int auto_boot)
{
env_command_line = getenv("bootargs");
/* set console= argument if we use a serial console */
- if (NULL == strstr(env_command_line, "console=")) {
- if (0==strcmp(getenv("stdout"), "serial")) {
+ if (!strstr(env_command_line, "console=")) {
+ if (!strcmp(getenv("stdout"), "serial")) {
/* We seem to use serial console */
sprintf(command_line, "console=ttyS0,%s ",
- getenv("baudrate"));
+ getenv("baudrate"));
}
}
- if (auto_boot) {
+ if (auto_boot)
strcat(command_line, "auto ");
- }
- if (NULL != env_command_line) {
+ if (env_command_line)
strcat(command_line, env_command_line);
- }
-
printf("Kernel command line: \"%s\"\n", command_line);
}
-void *load_zimage(char *image, unsigned long kernel_size,
- unsigned long initrd_addr, unsigned long initrd_size,
- int auto_boot)
+static int kernel_magic_ok(struct setup_header *hdr)
{
- void *setup_base;
- int setup_size;
- int bootproto;
- int big_image;
- void *load_address;
-
- struct setup_header *hdr = (struct setup_header *)(image + SETUP_SECTS_OFF);
-
- setup_base = (void*)DEFAULT_SETUP_BASE; /* base address for real-mode segment */
-
if (KERNEL_MAGIC != hdr->boot_flag) {
- printf("Error: Invalid Boot Flag (found 0x%04x, expected 0x%04x)\n",
- hdr->boot_flag, KERNEL_MAGIC);
+ printf("Error: Invalid Boot Flag "
+ "(found 0x%04x, expected 0x%04x)\n",
+ hdr->boot_flag, KERNEL_MAGIC);
return 0;
} else {
printf("Valid Boot Flag\n");
+ return 1;
}
+}
- /* determine boot protocol version */
- if (KERNEL_V2_MAGIC == hdr->header) {
+static int get_boot_protocol(struct setup_header *hdr)
+{
+ if (hdr->header == KERNEL_V2_MAGIC) {
printf("Magic signature found\n");
-
- bootproto = hdr->version;
+ return hdr->version;
} else {
/* Very old kernel */
printf("Magic signature not found\n");
- bootproto = 0x0100;
+ return 0x0100;
}
+}
+
+struct boot_params *load_zimage(char *image, unsigned long kernel_size,
+ void **load_address)
+{
+ struct boot_params *setup_base;
+ int setup_size;
+ int bootproto;
+ int big_image;
+
+ struct boot_params *params = (struct boot_params *)image;
+ struct setup_header *hdr = ¶ms->hdr;
+
+ /* base address for real-mode segment */
+ setup_base = (struct boot_params *)DEFAULT_SETUP_BASE;
+
+ if (!kernel_magic_ok(hdr))
+ return 0;
/* determine size of setup */
if (0 == hdr->setup_sects) {
printf("Setup Size = 0x%8.8lx\n", (ulong)setup_size);
- if (setup_size > SETUP_MAX_SIZE) {
+ if (setup_size > SETUP_MAX_SIZE)
printf("Error: Setup is too large (%d bytes)\n", setup_size);
+
+ /* determine boot protocol version */
+ bootproto = get_boot_protocol(hdr);
+
+ printf("Using boot protocol version %x.%02x\n",
+ (bootproto & 0xff00) >> 8, bootproto & 0xff);
+
+ if (bootproto >= 0x0200) {
+ if (hdr->setup_sects >= 15) {
+ printf("Linux kernel version %s\n",
+ (char *)params +
+ hdr->kernel_version + 0x200);
+ } else {
+ printf("Setup Sectors < 15 - "
+ "Cannot print kernel version.\n");
+ }
}
/* Determine image type */
- big_image = (bootproto >= 0x0200) && (hdr->loadflags & BIG_KERNEL_FLAG);
+ big_image = (bootproto >= 0x0200) &&
+ (hdr->loadflags & BIG_KERNEL_FLAG);
/* Determine load address */
- load_address = (void*)(big_image ? BZIMAGE_LOAD_ADDR : ZIMAGE_LOAD_ADDR);
+ if (big_image)
+ *load_address = (void *)BZIMAGE_LOAD_ADDR;
+ else
+ *load_address = (void *)ZIMAGE_LOAD_ADDR;
+#if defined CONFIG_ZBOOT_32
+ printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
+ memset(setup_base, 0, sizeof(*setup_base));
+ setup_base->hdr = params->hdr;
+#else
/* load setup */
- printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n", (ulong)setup_base, setup_size);
+ printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n",
+ (ulong)setup_base, setup_size);
memmove(setup_base, image, setup_size);
+#endif
- printf("Using boot protocol version %x.%02x\n",
- (bootproto & 0xff00) >> 8, bootproto & 0xff);
+ if (bootproto >= 0x0204)
+ kernel_size = hdr->syssize * 16;
+ else
+ kernel_size -= setup_size;
if (bootproto == 0x0100) {
-
- *(u16*)(setup_base + CMD_LINE_MAGIC_OFF) = COMMAND_LINE_MAGIC;
- *(u16*)(setup_base + CMD_LINE_OFFSET_OFF) = COMMAND_LINE_OFFSET;
-
- /* A very old kernel MUST have its real-mode code
- * loaded at 0x90000 */
-
+ /*
+ * A very old kernel MUST have its real-mode code
+ * loaded at 0x90000
+ */
if ((u32)setup_base != 0x90000) {
/* Copy the real-mode kernel */
- memmove((void*)0x90000, setup_base, setup_size);
+ memmove((void *)0x90000, setup_base, setup_size);
+
/* Copy the command line */
- memmove((void*)0x99000, setup_base+COMMAND_LINE_OFFSET,
- COMMAND_LINE_SIZE);
+ memmove((void *)0x99000,
+ (u8 *)setup_base + COMMAND_LINE_OFFSET,
+ COMMAND_LINE_SIZE);
- setup_base = (void*)0x90000; /* Relocated */
+ /* Relocated */
+ setup_base = (struct boot_params *)0x90000;
}
/* It is recommended to clear memory up to the 32K mark */
- memset((void*)0x90000 + setup_size, 0, SETUP_MAX_SIZE-setup_size);
+ memset((u8 *)0x90000 + setup_size, 0,
+ SETUP_MAX_SIZE - setup_size);
+ }
+
+ if (big_image) {
+ if (kernel_size > BZIMAGE_MAX_SIZE) {
+ printf("Error: bzImage kernel too big! "
+ "(size: %ld, max: %d)\n",
+ kernel_size, BZIMAGE_MAX_SIZE);
+ return 0;
+ }
+ } else if ((kernel_size) > ZIMAGE_MAX_SIZE) {
+ printf("Error: zImage kernel too big! (size: %ld, max: %d)\n",
+ kernel_size, ZIMAGE_MAX_SIZE);
+ return 0;
}
- /* We are now setting up the real-mode version of the header */
- hdr = (struct setup_header *)(setup_base + SETUP_SECTS_OFF);
+ printf("Loading %s at address %p (%ld bytes)\n",
+ big_image ? "bzImage" : "zImage", *load_address, kernel_size);
+
+ memmove(*load_address, image + setup_size, kernel_size);
+
+ return setup_base;
+}
+
+int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
+ unsigned long initrd_addr, unsigned long initrd_size)
+{
+ struct setup_header *hdr = &setup_base->hdr;
+ int bootproto = get_boot_protocol(hdr);
+#if defined CONFIG_ZBOOT_32
+ setup_base->e820_entries = install_e820_map(
+ ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
+#endif
+
+ if (bootproto == 0x0100) {
+ setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC;
+ setup_base->screen_info.cl_offset = COMMAND_LINE_OFFSET;
+ }
if (bootproto >= 0x0200) {
hdr->type_of_loader = 8;
- if (hdr->setup_sects >= 15)
- printf("Linux kernel version %s\n", (char *)
- (setup_base + (hdr->kernel_version + 0x200)));
- else
- printf("Setup Sectors < 15 - Cannot print kernel version.\n");
-
if (initrd_addr) {
- printf("Initial RAM disk at linear address 0x%08lx, size %ld bytes\n",
+ printf("Initial RAM disk at linear address "
+ "0x%08lx, size %ld bytes\n",
initrd_addr, initrd_size);
hdr->ramdisk_image = initrd_addr;
}
if (bootproto >= 0x0202) {
- hdr->cmd_line_ptr = (u32)setup_base + COMMAND_LINE_OFFSET;
+ hdr->cmd_line_ptr = (uintptr_t)cmd_line;
} else if (bootproto >= 0x0200) {
-
- *(u16*)(setup_base + CMD_LINE_MAGIC_OFF) = COMMAND_LINE_MAGIC;
- *(u16*)(setup_base + CMD_LINE_OFFSET_OFF) = COMMAND_LINE_OFFSET;
+ setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC;
+ setup_base->screen_info.cl_offset =
+ (uintptr_t)cmd_line - (uintptr_t)setup_base;
hdr->setup_move_size = 0x9100;
}
- if (bootproto >= 0x0204)
- kernel_size = hdr->syssize * 16;
- else
- kernel_size -= setup_size;
-
-
- if (big_image) {
- if ((kernel_size) > BZIMAGE_MAX_SIZE) {
- printf("Error: bzImage kernel too big! (size: %ld, max: %d)\n",
- kernel_size, BZIMAGE_MAX_SIZE);
- return 0;
- }
-
- } else if ((kernel_size) > ZIMAGE_MAX_SIZE) {
- printf("Error: zImage kernel too big! (size: %ld, max: %d)\n",
- kernel_size, ZIMAGE_MAX_SIZE);
- return 0;
- }
-
/* build command line at COMMAND_LINE_OFFSET */
- build_command_line(setup_base + COMMAND_LINE_OFFSET, auto_boot);
-
- printf("Loading %czImage at address 0x%08x (%ld bytes)\n", big_image ? 'b' : ' ',
- (u32)load_address, kernel_size);
-
-
- memmove(load_address, image + setup_size, kernel_size);
-
- /* ready for booting */
- return setup_base;
+ build_command_line(cmd_line, auto_boot);
+ return 0;
}
-void boot_zimage(void *setup_base)
+void boot_zimage(void *setup_base, void *load_address)
{
+ printf("\nStarting kernel ...\n\n");
+
+#if defined CONFIG_ZBOOT_32
+ /*
+ * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params
+ * structure, and then jump to the kernel. We assume that %cs is
+ * 0x10, 4GB flat, and read/execute, and the data segments are 0x18,
+ * 4GB flat, and read/write. U-boot is setting them up that way for
+ * itself in arch/i386/cpu/cpu.c.
+ */
+ __asm__ __volatile__ (
+ "movl $0, %%ebp \n"
+ "cli \n"
+ "jmp %[kernel_entry] \n"
+ :: [kernel_entry]"a"(load_address),
+ [boot_params] "S"(setup_base),
+ "b"(0), "D"(0)
+ : "%ebp"
+ );
+#else
struct pt_regs regs;
memset(®s, 0, sizeof(struct pt_regs));
regs.xss = regs.xds;
regs.esp = 0x9000;
regs.eflags = 0;
- enter_realmode(((u32)setup_base+SETUP_START_OFFSET)>>4, 0, ®s, ®s);
+ enter_realmode(((u32)setup_base + SETUP_START_OFFSET) >> 4, 0,
+ ®s, ®s);
+#endif
}
-int do_zboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
- void *base_ptr;
+ struct boot_params *base_ptr;
void *bzImage_addr = NULL;
+ void *load_address;
char *s;
ulong bzImage_size = 0;
+ ulong initrd_addr = 0;
+ ulong initrd_size = 0;
disable_interrupts();
/* Setup board for maximum PC/AT Compatibility */
setup_pcat_compatibility();
- if (argc >= 2)
+ if (argc >= 2) {
/* argv[1] holds the address of the bzImage */
s = argv[1];
- else
+ } else {
s = getenv("fileaddr");
+ }
if (s)
bzImage_addr = (void *)simple_strtoul(s, NULL, 16);
- if (argc >= 3)
+ if (argc >= 3) {
/* argv[2] holds the size of the bzImage */
bzImage_size = simple_strtoul(argv[2], NULL, 16);
+ }
- /* Lets look for*/
- base_ptr = load_zimage (bzImage_addr, bzImage_size, 0, 0, 0);
-
- if (NULL == base_ptr) {
- printf ("## Kernel loading failed ...\n");
- } else {
- printf ("## Transferring control to Linux (at address %08x) ...\n",
- (u32)base_ptr);
+ if (argc >= 4)
+ initrd_addr = simple_strtoul(argv[3], NULL, 16);
+ if (argc >= 5)
+ initrd_size = simple_strtoul(argv[4], NULL, 16);
- /* we assume that the kernel is in place */
- printf("\nStarting kernel ...\n\n");
+ /* Lets look for */
+ base_ptr = load_zimage(bzImage_addr, bzImage_size, &load_address);
- boot_zimage(base_ptr);
- /* does not return */
+ if (!base_ptr) {
+ printf("## Kernel loading failed ...\n");
+ return -1;
}
+ if (setup_zimage(base_ptr, (char *)base_ptr + COMMAND_LINE_OFFSET,
+ 0, initrd_addr, initrd_size)) {
+ printf("Setting up boot parameters failed ...\n");
+ return -1;
+ }
+
+ printf("## Transferring control to Linux "
+ "(at address %08x) ...\n",
+ (u32)base_ptr);
+
+ /* we assume that the kernel is in place */
+ boot_zimage(base_ptr, load_address);
+ /* does not return */
return -1;
}
U_BOOT_CMD(
- zboot, 2, 0, do_zboot,
+ zboot, 5, 0, do_zboot,
"Boot bzImage",
- ""
+ "[addr] [size] [initrd addr] [initrd size]\n"
+ " addr - The optional starting address of the bzimage.\n"
+ " If not set it defaults to the environment\n"
+ " variable \"fileaddr\".\n"
+ " size - The optional size of the bzimage. Defaults to\n"
+ " zero.\n"
+ " initrd addr - The address of the initrd image to use, if any.\n"
+ " initrd size - The size of the initrd image to use, if any.\n"
);