#include <mpc512x.h>
#include <asm/bitops.h>
#include <command.h>
+#include <asm/processor.h>
+#include <fdt_support.h>
+#ifdef CONFIG_MISC_INIT_R
+#include <i2c.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
CLOCK_SCCR1_PSCFIFO_EN | \
CLOCK_SCCR1_DDR_EN | \
- CLOCK_SCCR1_FEC_EN)
+ CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_PATA_EN | \
+ CLOCK_SCCR1_PCI_EN | \
+ CLOCK_SCCR1_TPR_EN)
#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
CLOCK_SCCR2_SPDIF_EN | \
+ CLOCK_SCCR2_DIU_EN | \
CLOCK_SCCR2_I2C_EN)
#define CSAW_START(start) ((start) & 0xFFFF0000)
int board_early_init_f (void)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 lpcaw;
/*
* Initialize Local Window for the CPLD registers access (CS2 selects
* the CPLD chip)
*/
- im->sysconf.lpcs2aw = CSAW_START(CFG_CPLD_BASE) |
- CSAW_STOP(CFG_CPLD_BASE, CFG_CPLD_SIZE);
- im->lpc.cs_cfg[2] = CFG_CS2_CFG;
+ im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) |
+ CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE);
+ im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG;
/*
* According to MPC5121e RM, configuring local access windows should
* Without this the flash identification routine fails, as it needs to issue
* write commands in order to establish the device ID.
*/
- *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+#ifdef CONFIG_ADS5121_REV2
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
+#else
+ if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
+ } else {
+ /* running from Backup flash */
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32;
+ }
+#endif
+ /*
+ * Configure Flash Speed
+ */
+ *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG;
+ if (SVR_MJREV (im->sysconf.spridr) >= 2) {
+ *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING;
+ }
/*
* Enable clocks
*/
im->clk.sccr[0] = SCCR1_CLOCKS_EN;
im->clk.sccr[1] = SCCR2_CLOCKS_EN;
+#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+ im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN;
+#endif
return 0;
}
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
u32 msize = 0;
- puts ("Initializing\n");
msize = fixed_sdram ();
- puts (" DDR RAM: ");
return msize;
}
*/
long int fixed_sdram (void)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
- u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
u32 msize_log2 = __ilog2 (msize);
u32 i;
/* Initialize IO Control */
- im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
+ im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
/* Initialize DDR Local Window */
- im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
+ im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000;
im->sysconf.ddrlaw.ar = msize_log2 - 1;
/*
* According to MPC5121e RM, configuring local access windows should
* be followed by a dummy read of the config register that was
* modified last and an isync
- */
+ */
i = im->sysconf.ddrlaw.ar;
__asm__ __volatile__ ("isync");
/* Enable DDR */
- im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_EN;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN;
/* Initialize DDR Priority Manager */
- im->mddrc.prioman_config1 = CFG_MDDRCGRP_PM_CFG1;
- im->mddrc.prioman_config2 = CFG_MDDRCGRP_PM_CFG2;
- im->mddrc.hiprio_config = CFG_MDDRCGRP_HIPRIO_CFG;
- im->mddrc.lut_table0_main_upper = CFG_MDDRCGRP_LUT0_MU;
- im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU;
- im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU;
- im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU;
- im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU;
- im->mddrc.lut_table0_main_lower = CFG_MDDRCGRP_LUT0_ML;
- im->mddrc.lut_table1_main_lower = CFG_MDDRCGRP_LUT1_ML;
- im->mddrc.lut_table2_main_lower = CFG_MDDRCGRP_LUT2_ML;
- im->mddrc.lut_table3_main_lower = CFG_MDDRCGRP_LUT3_ML;
- im->mddrc.lut_table4_main_lower = CFG_MDDRCGRP_LUT4_ML;
- im->mddrc.lut_table0_alternate_upper = CFG_MDDRCGRP_LUT0_AU;
- im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU;
- im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU;
- im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU;
- im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU;
- im->mddrc.lut_table0_alternate_lower = CFG_MDDRCGRP_LUT0_AU;
- im->mddrc.lut_table1_alternate_lower = CFG_MDDRCGRP_LUT1_AL;
- im->mddrc.lut_table2_alternate_lower = CFG_MDDRCGRP_LUT2_AL;
- im->mddrc.lut_table3_alternate_lower = CFG_MDDRCGRP_LUT3_AL;
- im->mddrc.lut_table4_alternate_lower = CFG_MDDRCGRP_LUT4_AL;
+ im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1;
+ im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2;
+ im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG;
+ im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU;
+ im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML;
+ im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU;
+ im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML;
+ im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU;
+ im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML;
+ im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU;
+ im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML;
+ im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU;
+ im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML;
+ im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU;
+ im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL;
+ im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU;
+ im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL;
+ im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU;
+ im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL;
+ im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU;
+ im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL;
+ im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU;
+ im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL;
/* Initialize MDDRC */
- im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG;
- im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0;
- im->mddrc.ddr_time_config1 = CFG_MDDRC_TIME_CFG1;
- im->mddrc.ddr_time_config2 = CFG_MDDRC_TIME_CFG2;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG;
+ im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0;
+ im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1;
+ im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2;
/* Initialize DDR */
for (i = 0; i < 10; i++)
- im->mddrc.ddr_command = CFG_MICRON_NOP;
-
- im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
- im->mddrc.ddr_command = CFG_MICRON_EM2;
- im->mddrc.ddr_command = CFG_MICRON_EM3;
- im->mddrc.ddr_command = CFG_MICRON_EN_DLL;
- im->mddrc.ddr_command = CFG_MICRON_RST_DLL;
- im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
- im->mddrc.ddr_command = CFG_MICRON_RFSH;
- im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
- im->mddrc.ddr_command = CFG_MICRON_OCD_DEFAULT;
- im->mddrc.ddr_command = CFG_MICRON_OCD_EXIT;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
- for (i = 0; i < 10; i++)
- im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
/* Start MDDRC */
- im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0_RUN;
- im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_RUN;
+ im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN;
return msize;
}
+int misc_init_r(void)
+{
+ u8 tmp_val;
+ extern int ads5121_diu_init(void);
+
+ /* Using this for DIU init before the driver in linux takes over
+ * Enable the TFP410 Encoder (I2C address 0x38)
+ */
+
+ i2c_set_bus_num(2);
+ tmp_val = 0xBF;
+ i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+ /* Verify if enabled */
+ tmp_val = 0;
+ i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+ debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
+
+ tmp_val = 0x10;
+ i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+ /* Verify if enabled */
+ tmp_val = 0;
+ i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+ debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
+
+#ifdef CONFIG_FSL_DIU_FB
+#if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
+ ads5121_diu_init();
+#endif
+#endif
+
+ return 0;
+}
+static iopin_t ioregs_init[] = {
+ /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+ {
+ IOCTL_SPDIF_TXCLK, 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* Set highest Slew on 9 PATA pins */
+ {
+ IOCTL_PATA_CE1, 9, 1,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+ {
+ IOCTL_PSC0_0, 15, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=SPDIF_TXCLK */
+ {
+ IOCTL_LPC_CS1, 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+ {
+ IOCTL_I2C1_SCL, 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU CLK */
+ {
+ IOCTL_PSC6_0, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU_HSYNC */
+ {
+ IOCTL_PSC6_1, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+ {
+ IOCTL_PSC6_4, 26, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
+
+static iopin_t rev2_silicon_pci_ioregs_init[] = {
+ /* FUNC0=PCI Sets next 54 to PCI pads */
+ {
+ IOCTL_PCI_AD31, 54, 0,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
+ }
+};
+
int checkboard (void)
{
- ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00);
- uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02);
+ ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
+ uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
- brd_rev, cpld_rev);
+ brd_rev, cpld_rev);
+ /* initialize function mux & slew rate IO inter alia on IO Pins */
+
+ iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
+ if (SVR_MJREV (im->sysconf.spridr) >= 2) {
+ iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ debug ("init_ide_reset\n");
+
+ /*
+ * Clear the reset bit to reset the interface
+ * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
+ */
+ immr->pata.pata_ata_control = 0;
+ udelay(100);
+ /* Assert the reset bit to enable the interface */
+ immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+ udelay(100);
+
+}
+
+void ide_set_reset (int idereset)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ debug ("ide_set_reset(%d)\n", idereset);
+
+ if (idereset) {
+ immr->pata.pata_ata_control = 0;
+ udelay(100);
+ } else {
+ immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+ udelay(100);
+ }
+}
+
+#define CALC_TIMING(t) (t + period - 1) / period
+
+int ide_preinit (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ long t;
+ const struct {
+ short t0;
+ short t1;
+ short t2_8;
+ short t2_16;
+ short t2i;
+ short t4;
+ short t9;
+ short tA;
+ } pio_specs = {
+ .t0 = 600,
+ .t1 = 70,
+ .t2_8 = 290,
+ .t2_16 = 165,
+ .t2i = 0,
+ .t4 = 30,
+ .t9 = 20,
+ .tA = 50,
+ };
+ union {
+ u32 config;
+ struct {
+ u8 field1;
+ u8 field2;
+ u8 field3;
+ u8 field4;
+ }bytes;
+ }cfg;
+
+ debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
+ (u32)&immr->pata);
+
+ /* Set the reset bit to 1 to enable the interface */
+ immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+
+ /* Init timings : we use PIO mode 0 timings */
+ t = 1000000000 / gd->ips_clk; /* period in ns */
+ cfg.bytes.field1 = 3;
+ cfg.bytes.field2 = 3;
+ cfg.bytes.field3 = (pio_specs.t1 + t) / t;
+ cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
+
+ immr->pata.pata_time1 = cfg.config;
+
+ cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
+ cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
+ cfg.bytes.field3 = 1;
+ cfg.bytes.field4 = (pio_specs.t4 + t) / t;
+
+ immr->pata.pata_time2 = cfg.config;
+
+ cfg.config = immr->pata.pata_time3;
+ cfg.bytes.field1 = (pio_specs.t9 + t) / t;
+
+ immr->pata.pata_time3 = cfg.config;
+ debug ("PATA preinit complete.\n");
+
return 0;
}
+
+#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */