mx53ard: Remove unused get_board_rev function

[u-boot] / board / amcc / katmai / katmai.c

diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index f0b48c0d320975f9e9a1e0273d7948e01e8af793..34380658e5e05300d676a7a93156da75b6e4ffb5 100644 (file)
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -23,14 +23,14 @@
  */
 
 #include <common.h>
-#include <ppc4xx.h>
+#include <asm/ppc4xx.h>
 #include <i2c.h>
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <netdev.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <asm/gpio.h>
+#include <asm/ppc4xx-gpio.h>
 #include <asm/4xx_pcie.h>
 #include <asm/errno.h>
 
@@ -236,12 +236,13 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-       char *s = getenv("serial#");
+       char buf[64];
+       int i = getenv_f("serial#", buf, sizeof(buf));
 
        printf("Board: Katmai - AMCC 440SPe Evaluation Board");
-       if (s != NULL) {
+       if (i > 0) {
                puts(", serial# ");
-               puts(s);
+               puts(buf);
        }
        putc('\n');
 
@@ -249,7 +250,7 @@ int checkboard (void)
 }
 
 /*
- * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
  * board specific values.
  */
 u32 ddr_wrdtr(u32 default_val) {
@@ -260,37 +261,6 @@ u32 ddr_clktr(u32 default_val) {
        return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
 }
 
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *     Different boards may wish to customize the pci controller structure
- *     (add regions, override default access routines, etc) or perform
- *     certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose )
-{
-       unsigned long strap;
-
-       /*-------------------------------------------------------------------+
-        *      The katmai board is always configured as the host & requires the
-        *      PCI arbiter to be enabled.
-        *-------------------------------------------------------------------*/
-       mfsdr(SDR0_SDSTP1, strap);
-       if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
-               printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
-               return 0;
-       }
-
-       return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
 #if defined(CONFIG_PCI)
 int board_pcie_card_present(int port)
 {
@@ -310,17 +280,6 @@ int board_pcie_card_present(int port)
 }
 #endif /* defined(CONFIG_PCI) */
 
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-       return (ctrlc());
-}
-#endif
-
 int board_eth_init(bd_t *bis)
 {
        cpu_eth_init(bis);