mxc_ipuv3: fix memory alignment of framebuffer

[u-boot] / board / amcc / makalu / makalu.c

diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index fb0e7b75eb9bad44dfbd5bc65b9cfedc4508e7bc..34a094fc769640d4155aa6ac6550eedec20537ff 100644 (file)
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -22,13 +22,14 @@
  */
 
 #include <common.h>
-#include <ppc4xx.h>
-#include <ppc405.h>
+#include <asm/ppc4xx.h>
+#include <asm/ppc405.h>
 #include <libfdt.h>
 #include <asm/processor.h>
-#include <asm/gpio.h>
+#include <asm/ppc4xx-gpio.h>
 #include <asm/io.h>
 #include <fdt_support.h>
+#include <asm/errno.h>
 
 #if defined(CONFIG_PCI)
 #include <pci.h>
@@ -223,110 +224,16 @@ int misc_init_r(void)
 
 int checkboard (void)
 {
-       char *s = getenv("serial#");
+       char buf[64];
+       int i = getenv_f("serial#", buf, sizeof(buf));
 
        printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
 
-       if (s != NULL) {
+       if (i > 0) {
                puts(", serial# ");
-               puts(s);
+               puts(buf);
        }
        putc('\n');
 
        return (0);
 }
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *      Different boards may wish to customize the pci controller structure
- *      (add regions, override default access routines, etc) or perform
- *      certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose )
-{
-       return 0;
-}
-#endif  /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_PCI
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
-       struct pci_controller *hose;
-       int i, bus;
-       int ret = 0;
-       bus = busno;
-       char *env;
-       unsigned int delay;
-
-       for (i = 0; i < 2; i++) {
-
-               if (is_end_point(i))
-                       ret = ppc4xx_init_pcie_endport(i);
-               else
-                       ret = ppc4xx_init_pcie_rootport(i);
-               if (ret) {
-                       printf("PCIE%d: initialization as %s failed\n", i,
-                              is_end_point(i) ? "endpoint" : "root-complex");
-                       continue;
-               }
-
-               hose = &pcie_hose[i];
-               hose->first_busno = bus;
-               hose->last_busno = bus;
-               hose->current_busno = bus;
-
-               /* setup mem resource */
-               pci_set_region(hose->regions + 0,
-                              CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-                              CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-                              CONFIG_SYS_PCIE_MEMSIZE,
-                              PCI_REGION_MEM);
-               hose->region_count = 1;
-               pci_register_hose(hose);
-
-               if (is_end_point(i)) {
-                       ppc4xx_setup_pcie_endpoint(hose, i);
-                       /*
-                        * Reson for no scanning is endpoint can not generate
-                        * upstream configuration accesses.
-                        */
-               } else {
-                       ppc4xx_setup_pcie_rootpoint(hose, i);
-                       env = getenv ("pciscandelay");
-                       if (env != NULL) {
-                               delay = simple_strtoul(env, NULL, 10);
-                               if (delay > 5)
-                                       printf("Warning, expect noticable delay before "
-                                              "PCIe scan due to 'pciscandelay' value!\n");
-                               mdelay(delay * 1000);
-                       }
-
-                       /*
-                        * Config access can only go down stream
-                        */
-                       hose->last_busno = pci_hose_scan(hose);
-                       bus = hose->last_busno + 1;
-               }
-       }
-}
-#endif
-
-#if defined(CONFIG_POST)
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-       return 0;       /* No hotkeys supported */
-}
-#endif /* CONFIG_POST */